Good evening Bob, grateful for your great explanation of programming this radio since I couldn't program this radio well. This is a beautiful hobby that I used in my free time as a rest and worry. It's fun and that makes me happy because I spent a long time looking for videos of who will teach. I'm talking about all this about programming additional lights, etc. Thank you for your great contribution atte. Roberto Salazar
Hi Bob, a great tutorial indeed, showing the programming differences between the FS-i6 and FS-i6x. I’ve used the FS-i6S for my Scania R620, awesome radio’s as they come with the self centring kit as standard. Take care and best wishes 😁😊😉
Thank you so much was have some difficulty with my first go around (already planning out another haha) but from your video got it pretty much down and found a neutral switch as well nice for testing sounds and smoke machine
Bob, a good friend of mine will find this extremely valuable! He's building his first Rig, and found your new Grand Hauler series absolutely amazing!! It really helped. This answered a couple of questions for me as well. 👍👍 Feel like a challenge??? If you can figure out how to set up the FS-i6X to run either S-Bus or I-Bus with Beier.... You would make my three USM-RC-2s actually USABLE! 😲 I'm so frustrated trying, and there's NO good videos out there. The few just show how to do it with Drones, with specific Board Receivers. It would really be appreciated if you could.
Hiya Bob. Many thanks for your videos I'm not a spark! I Was a good motor machanic petrol and diesel love your USA rigs I'm building a Scania 6x4 as ex' HGV 1 driver "semi" thank you Pete
just bought 2 of these as the price was good, when I was looking for a controller a couple of years ago I ended up with the Carson 500501006 FS Reflex Stick II 6 Channel Remote with Reciever. I am surprised that controllers have come down so much in the last couple of years, especially when the price of everything else is going up so dramatically.
Great video. I currently use a Turnigy 9XR Pro for my trucks and tanks, but the sticks are starting to drift. Looking at swapping out the sticks, but these radios are priced low enough to perhaps swap out all my Turnigy stuff. (4 trucks, 3 tanks, 1 boat)
Flysky FS-i10 , how can I program it for my project prototype Boeing 747-8i , please Thank you very much and God bless you and your family......be safe
Good night Bob. I added the other receiver for the trailer lights very well when I started my truck the MFC was isolated the lights only flashed and it didn't start what should I do thanks att. Roberto Salazar
The truck receiver is no longer bound. Using 2 receivers ONLY works if both receivers ate the ia6. The "B" model receivers or the 10 channel receivers will not work. You may need to bind both receivers at the same time.
Can you do the second receiver for trailer lights with this one I am having some difficulty connecting two like ya did in your video for the non x version
Hi Bob I can’t get my fs-i6x transmitter to bind with two fs-ia6b receivers I followed your instruction in both videos Yet it seems to only bind 1 rec The one to the trailer light set and I lose the truck MFC-01 Please advise Appreciate your time Thank You
In programming the Fly Sky fsi6s to work with Tamiya mfc unit be the same process in the way you programed the fsi6x to work and communicate with the Tamiya mfc? Wondering if the Flysky fsi6s programs the same as the fsi6x to work with the Tamiya mfc. Thanks.
I recently got the FS I6x and have a GT sound , voice and light Unit I am using a separate esc with the system, got it all to work but need to add the coupler servo for the trailer release, had to connect the shifting servo to the receiver directly for it to shift works just fine. But I was wondering if adding extra lights would be the same process like this one you have in the video, anyone’s thoughts!!
Good evening, could you help me with a problem I have? i have the mfc 03 and the carson reflex stick 2 radio and i can't start the engine...at first when i tried it it started as well as the vibration and now it doesn't do anything..
Hi Bob, great video and has helped me out so much, why do you assign D/R to ch2 and ch4 but you only use one switch for D/R? one switch does D/R, another switch does the gears, so what is the other switch for?
The other switch is unused with a standard MFC setup so it winds up as an extra channel. You can use it for other things. As an example an electronic switch to control more led's.
@@HobbyconceptsLLC Thank you for your reply, so does this switch need to be assigned? I am programming a FRSKY Taranis via Open TX and this is all a learning curve to me.
Hello Bob, awesome video👍🏻, do you have to change the receiver if you want set wireless trailer lights(compatible dual receiver) or the the same 10ch receiver will do?
Hello sir mine was i6s i look at this video is i6x so i wonder they can use the same method that you program 😅 And thank you very much for replying me thank you I'm so enjoying to watch all of your video learn a lot of things that you share 😁
My FS i6X arrives today. This video is invaluable. Changing my Scania over to Flysky. So once again Thank you Bob.
Good evening Bob, grateful for your great explanation of programming this radio since I couldn't program this radio well. This is a beautiful hobby that I used in my free time as a rest and worry. It's fun and that makes me happy because I spent a long time looking for videos of who will teach. I'm talking about all this about programming additional lights, etc. Thank you for your great contribution atte. Roberto Salazar
Appreciate the comments, glad the videos help!
Hi Bob, a great tutorial indeed, showing the programming differences between the FS-i6 and FS-i6x. I’ve used the FS-i6S for my Scania R620, awesome radio’s as they come with the self centring kit as standard. Take care and best wishes 😁😊😉
What a great video!! Finding this programming was a bit on the difficult side. Thank you !!!!
Thanks Bob your a legend. If I didn't have your videos this would so difficult to get right.
Thank you so much was have some difficulty with my first go around (already planning out another haha) but from your video got it pretty much down and found a neutral switch as well nice for testing sounds and smoke machine
Bob, a good friend of mine will find this extremely valuable! He's building his first Rig, and found your new Grand Hauler series absolutely amazing!! It really helped.
This answered a couple of questions for me as well. 👍👍
Feel like a challenge???
If you can figure out how to set up the FS-i6X to run either S-Bus or I-Bus with Beier.... You would make my three USM-RC-2s actually USABLE! 😲 I'm so frustrated trying, and there's NO good videos out there. The few just show how to do it with Drones, with specific Board Receivers.
It would really be appreciated if you could.
Hiya Bob. Many thanks for your videos I'm not a spark! I Was a good motor machanic petrol and diesel love your USA rigs I'm building a Scania 6x4 as ex' HGV 1 driver "semi" thank you Pete
just bought 2 of these as the price was good, when I was looking for a controller a couple of years ago I ended up with the Carson 500501006 FS Reflex Stick II 6 Channel Remote with Reciever. I am surprised that controllers have come down so much in the last couple of years, especially when the price of everything else is going up so dramatically.
I use the Noble NB4 which is great. A truck needs a wheel.
Great video its good advice😀👍🏻
Hi Bob, was wandering when your going to have a video on bluX smoke system.
Great video. I currently use a Turnigy 9XR Pro for my trucks and tanks, but the sticks are starting to drift. Looking at swapping out the sticks, but these radios are priced low enough to perhaps swap out all my Turnigy stuff. (4 trucks, 3 tanks, 1 boat)
For example, how can you check whether the rear lights turn red before you install them in the MFC 03.
I wish I had the courage to try this ..
Great video as always. Also where do I plug it into? Your help is greatly appreciated, thanks.
Flysky FS-i10 , how can I program it for my project prototype Boeing 747-8i , please
Thank you very much and God bless you and your family......be safe
Good night Bob. I added the other receiver for the trailer lights very well when I started my truck the MFC was isolated the lights only flashed and it didn't start what should I do thanks att. Roberto Salazar
The truck receiver is no longer bound. Using 2 receivers ONLY works if both receivers ate the ia6. The "B" model receivers or the 10 channel receivers will not work. You may need to bind both receivers at the same time.
Can you do the second receiver for trailer lights with this one I am having some difficulty connecting two like ya did in your video for the non x version
Hi Bob
I can’t get my fs-i6x transmitter to bind with two fs-ia6b receivers
I followed your instruction in both videos
Yet it seems to only bind 1 rec
The one to the trailer light set and I lose the truck MFC-01
Please advise
Appreciate your time
Thank You
Only works with the iA6 receivers. The "B" receivers will not work.
In programming the Fly Sky fsi6s to work with Tamiya mfc unit be the same process in the way you programed the fsi6x to work and communicate with the Tamiya mfc? Wondering if the Flysky fsi6s programs the same as the fsi6x to work with the Tamiya mfc. Thanks.
I recently got the FS I6x and have a GT sound , voice and light Unit I am using a separate esc with the system, got it all to work but need to add the coupler servo for the trailer release, had to connect the shifting servo to the receiver directly for it to shift works just fine. But I was wondering if adding extra lights would be the same process like this one you have in the video, anyone’s thoughts!!
Hi Bob,just wondering if I could use swb switch to add smoke simulator so I can turn it on and off from my controler
Hi bob, my question is can you use this control for the die cast cascadia truck?
I suppose you could but frankly that die cast masters truck is probably not worth the expense. You would need a new radio also.
Good evening, could you help me with a problem I have? i have the mfc 03 and the carson reflex stick 2 radio and i can't start the engine...at first when i tried it it started as well as the vibration and now it doesn't do anything..
If it did work and they does not check the 3 position switch next to the on/off switch. Should be in the center.
maestro please can you put the subtitles in Italian thank you❤😊
💕👍
Hi bob can you help me please? Im in trouble with this radio and mfc01..
Que lo isieron español o castellano soy de culiacan Sin. Mex.muchas grasias por todo
😲🤙
Hi Bob, great video and has helped me out so much, why do you assign D/R to ch2 and ch4 but you only use one switch for D/R? one switch does D/R, another switch does the gears, so what is the other switch for?
The other switch is unused with a standard MFC setup so it winds up as an extra channel. You can use it for other things. As an example an electronic switch to control more led's.
@@HobbyconceptsLLC Thank you for your reply, so does this switch need to be assigned? I am programming a FRSKY Taranis via Open TX and this is all a learning curve to me.
Hello Bob, awesome video👍🏻, do you have to change the receiver if you want set wireless trailer lights(compatible dual receiver) or the the same 10ch receiver will do?
Binding 2 receivers at the same time only works if both receivers at the ia6.
@@HobbyconceptsLLC thanks you, much appreciated 👍🏻
Hi Bob, would be able to show how to program a Jumper T16 radio to MFC?
I don't have one of those radios.
Juilo saldador Ecuador
I’d like to ask if 2S Lipo batteries ok to be used with MFC-01? I’ve read mix answers as both yes and no. Thank you.
You can use a 2s. But be aware that the MFC has no low voltage cutoff so a separate low voltage alarm is a very good idea.
what is an MMC?
Will this process work with the GT Power Pro?
I have tried personally to make GT Power pro equipment work but no luck....
Have you done a mfc with 7px?
If that is a wheel type radio it will not work.
Can I buy one of your t shirts size medium?
Hello sir is it any or posible do also i6s 10ch radio program for mfc03 ? 😅
Yes, I have a video on programming the FS-i6x
Hello sir mine was i6s i look at this video is i6x so i wonder they can use the same method that you program 😅
And thank you very much for replying me thank you
I'm so enjoying to watch all of your video learn a lot of things that you share 😁
Hellow sir i have solution for your channel views.