How to set timing and fix the blown head gascket on Chevrolet Cruze (p1)

Hello everyone! In this video I'm going to show you how to detect and fix the blown head gascket on Chevrolet Cruze 2014 1.4 turbo engine. This is a step-by-step video in which you will learn: blown head gasket symptoms, how to know if head gasket is blown, the best way to check blown head gasket and how to fix it on Chevrolet Cruze. I will show you how to test for blown head gasket with a special tool camera, how to remove the cylinder head, as well as the many nuances of repairing cars with similar problems. This was the first part of the video about repairing the cylinder head on Chevrolet Cruze 1.4 turbo. In the second part we will finish all the repair procedures and you will learn why this problem occurred on this car and how we dealt with it.
My social media:
FaceBook: www.facebook.c...
Instagram: / turbo_moniac
My channel in Russian about cars in USA:
/ @turbomaniac9783
My channel in Russian about life in USA:
/ @АмериканскаяРеальност...

[@calorcito4209]

They way you explain and show exactly whats necessary, thank you I used to always the the front cover 😂😂

[@peterzweers7354]

Thank you for this video this is the best one that I found on this subject! I have a Opel Meriva 2012 with a blown head gasket and it has exactly the same engine.

[@adventures223]

Very good job nice explaination this is a big job for sure

[@joshuahammerii7329]

благодарю! I am working on a Buick Encore with the exact same 1.4 EcoTec motor and I was having so much trouble with getting the timing pin in, 28:30 . Your guide is so much easier to follow than others I came across.
Спасибо еще раз!

[@АсланБек-ж5ю]

Sergei, thank you for the video, it helped me a lot in the repair.

[@Nightromance]

Sergei, there is a typo in the headline, "gasket". Great video!

[@agustingaytan2455]

What the name of kit your using for timming belt.

[@vadiq8147]

I'm ready to fix my Chevrolet Cruze 2011 with turbo engine! Thank you :)

[@jamesdoes576]

What does it mean if coolant is in intake b4 valve

[@lakeoverview6666]

What direction does the crank torx turn?

[@123mebrucelee]

What is the specific name on that timing kit that you're using??

[@UncleRene65]

Hello thank you great video I am almost done but having hard time getting large pin on bottom for cam shaft .. does it have to go all the way in ????

[@turbomaniac9783]

Yes

[@UncleRene65]

@@turbomaniac9783 man I have tried a few days now and it’s about a 1/4 from flush .. going to risk it …. Wish me luck

[@heightskings6693]

@@UncleRene65 how’d it go ?

[@ricardocastillo3048]

I have same problem

[@LOLONO666]

could u make a video about timing belt cover gasket plz?

[@galesams4205]

You could have pressureized the cooling system while cameria was in # 1 to find the leak.

[@viktormarchenko3394]

Hai gains👍Hello friend, cool vidos. 😀

[@juliollerenas4995]

gracias

[@augustinefestusmoore7700]

Pls I need the colour code for this car

[@sayakhat.nuraly]

First!)

[@adventures223]

Started doing the job just use Mitchell 1 diy repair manual along with the video there's so much left out in the video always use a Mitchell 1 diy with any video it will save you a lot of time and stress plus each year might be slightly different not really a bad video just skipped over some important stuff people that make repair videos need to do it step by step and not leave anything out

[@mmsharafeyev]

Классно😅🔥

[@YawnOfHeartness]

And now, I slide my pin inside XD

[@sayakhat.nuraly]

Да, наверно нелегко справиться с трем каналам UA-cam)

[@АсланБек-ж5ю]

Ассалам алейкум Нуралы. Я тоже с Казахстана.

[@sayakhat.nuraly]

@@АсланБек-ж5ю Уа алейкум ассалам.

[@Carlosaguilar-pe8fx]

Good job dude!

[@ДенисКазак-у2д]

Почему то я понимаю всё что ты говоришь, хотя я не знаю английского)

[@Free_Hero]

Надо микрофон , а то эхо сильное и сложно разобрать слова