LS Engine Cylinder Head Rebuild (Junkyard Style) + New Brake Lines | Turbo S10 Minitruck Build
Вставка
- Опубліковано 20 жов 2024
- This time on SPPTV we are back at RFG and Rob's Turbo 5.3 LS S-10 Project continues to come back together! The front end and engine bay are finished, minus a few finishing touches including brake lines. It is time to prepare the $300 Junkyard 5.3 L33 all aluminum factory GM race engine.
Rebuilding a set of cylinder heads does not cost that much, at least if you follow the RFG junkyard engine procedure! Most people upgrade valve springs at the same time they add a performance camshaft. Rob found a great deal online for some Trick Flow valve springs that are re-branded PAC springs.
The heads are cleaned and prepped, and threads for a mechanical coolant temperature gauge are tapped on the previously plugged passenger side head. All of this work is fairly straight forward, and worth while to do when your heads are off the engine.
Next episode the cylinder heads are installed with everyone's favorite torque wrench! Subscribe now to get notifications when new videos come out!
Thanks for watching! And a special thanks goes out to Dave for the generous support! Drop a LIKE if you enjoyed!
Facebook @ SPPTV UA-cam
Instagram @ SPPTVonUA-cam
Snapchat @ SPPTV
PO BOX INFO:
PO BOX 99900 LX 087 592
RPO GARDEN CITY
WINNIPEG MB R2V 5A2
cringing former machine shop guy here. chucking valves in a drill is fine for the home gamer, but the stems should be greased first. s10 is looking good👍
That's awesome! Drinks on Dave!
Love your channel. One suggestion, dab some high pressure grease on the valve stems before spinning them up. Those high mileage heads need every bit of bronze or whatever material the guides are made of left. I was just always told to do that when lapping valves. Stay warm guys!
The stems were oiled up. No galling occurred
That was a cool trick for lapping the valves yourself. Good video! Thanks
Looking good boy's can't wait to hear the truck running..
I lap my valves the same way. Never had an issue. The suction cup tool takes forever.
The pitting on the valves comes from the shiny fuel they sell us. That’s what leaded fuel help prevent
More awesomeness from RFG! Keep up the great work!
Finally a new video, feels like it’s been a month
+Tblue It does doesn't it.
Yes it does. Ive been needing some spp. Lot of good content coming out of Canada these days,rad in the front or rad in the back, all good stuff.
Thanks
I wanted to know what is the name of the material that is applied to the valves
Was starting to wonder about you guys, glad to see a new vid!
+Drake Feore Ran out of creativity temporarily. :P
Happens to the best of us man I can relate. I'm sure it being the "off" season doesn't help. I think I speak for us all when I say we're not going anywhere. Will continue to enjoy the content as it comes out, when it comes out.
What kind of compressor is that?
the exhaust valves look like that because the carbon built up gets hammered on them
New intro is dope!
Ok cool bro keep up the great work
What is the best head for the LS1 on a rebuilt is it better to just Port polish on heads or is it better to use a LS6 heads
The 799 or 243 heads are basically the same as ls6 heads with different valves. They are good heads.
2.00 intake with 1.55 exhaust
I've missed you guys! :'(
1991CALYPSO iiiii
2.00/1.55
My 799 are 2.000"/1.575"
Are you going to port in polish those heads
Cary Christian no
Come on Rob you beautiful work but, you let me down with that brake line bending. This is NOT Sloppy SPPTV. Lol
Last time I came this early I shamefully got dressed and left a tip
good man
When are you guys coming to Minneapolis?
+skynet000001 this weekend
+skynet000001 This weekend.
Yes, this weekend
2.00/1.55 on 799/243’s
Thehouseofboost also on 853/241s/317s
Wrong
Machine shop guys? Like Clayton? lol
dope
If they check bounces, the bank will charge him $35 for posting a check without funds LOL.
You don’t drill aluminum slow. You drill steel slow and aluminum fast.
2.00 and 1.55
2.02 intake 1.60 ex?
He would never work on mine
You got that right!
An alternative method for removing bolts from an aluminum head is to use alum. Here's a vidjeo from AvE; everybody's favorite Uncle Bumblefuck: ua-cam.com/video/fqZYgReuywM/v-deo.html
well, Im glad Dave learned a lot from your channel. I really hopes he learns a lot about sending money / checks yo people in through the mail. It's just a stupid thing to do with all of the options these days.
5.3 HAS 1.89" INTAKE DIA, 5.7 AND 6.0 HAVE 2.00" INTAKE DIA
Yelawolf.no hands
Stop being a back seat machinist Clayton. Lol
Alpha Ghost
Sometimes I just gotta step back