Big chamfer is not allowed on o ring grooves, only a very small radius or just deburr to prevent cutting o ring on instaling it. Anodising the parts will help with corrosion issues.
Your videos are super cool and I'm subscribed! make a homemade condor air force!!!! project show!!!! I'm from Brazil and I never miss a video of yours!
Bagi saya untuk bahan tabung aluminium gunakan ketebelan minimal 4mm untuk menggapai safety 2500psi, saya sudah meng ujinya selama pemakaian 7th dan masih sampai sekarang
If price is a concern copper is more expensive than aluminium and weaker too, you'll need more material and thicker walls on the reservoir to achieve same strenght at equal amounts of pressure, raising the price even more.
Salam aleykum Increasing the power of a spring powered air gun cannot be done the same way a PCP air gun can be tuned. All you can do is replace the spring for a stronger one, you might find some stronger springs online if you know the specs of the sr1000s spring.
Hello, my friend. If this is an SS 304 tank with the same dimensions and sizes, what will its approximate weight be, my friend? Thank you. @@pcpairgunschannel
Dude! Your gonna get a nasty cut on your hand playing with the swarf (the curly bits of metal coming off the cuts your making). One day your gonna grab and it will bite you.
@@pcpairgunschannel also lot of research and reading about speeds and feeds, lathe tool geometry. If these combined correctly you shouldn't get great lengths. It's nasty stuff. Literally thousands of pics of people who've been hurt by it.
I'm guessing like on my mini lathe slow speed is terrible so I also turn the chuck by hand. The lead screw is however connected with the right gear ratio for the pitch. Your using slow speed muscle instead of crappy electric motor 😅😅😅
@@jihadramadhan8295 there are specific safety measurements. 3mm wall with 28mm od is max 3500 psi In Indonesia there are PCPs with 38mm od 3mm wall aluminium tanks for 2500 psi.
You like doing these videos ???????? Well if so I would get your miss and digits as far away from the lathe chuck as possible it may be a small machine but do not doubt it it will do damage to any part of your body especially keep your finger out tube's with sand paper or cloth I cringed for you when you finger banged that thread u cut it will twist your finger off in a split second young man your adolescent of working around mills lathe grinders is obvious watch some videos on how too respect a lathe I'm not bashing u I'm trying to save your digits
Big chamfer is not allowed on o ring grooves, only a very small radius or just deburr to prevent cutting o ring on instaling it. Anodising the parts will help with corrosion issues.
I wouldn't say the chamfer was big.
This is not the final tank, this is just a part of making the full air gun.
Your videos are super cool and I'm subscribed! make a homemade condor air force!!!! project show!!!! I'm from Brazil and I never miss a video of yours!
Fast working for your make adaptor tube, maybe i'll not making like you,with tool i have. Excelent 👍👍
PCP Airtang 6000 is back with another video 🥶🔥
What is bro yapping about 😅
Bagi saya untuk bahan tabung aluminium gunakan ketebelan minimal 4mm untuk menggapai safety 2500psi, saya sudah meng ujinya selama pemakaian 7th dan masih sampai sekarang
Ive never seen that inlet system with the ground down screw and o-ring! Super interesting!
Please use anti seized on all threads that are of the same material, especially fine threads.
Fc from Thailand bro
Show de bola 👌👊🤝♥️🇧🇷
Keren gan mantap salam sukses 🙏
Very cool! I need to get myself a lathe. Did you see my BigBore?
I didn't, I'll check it out!
Memahami carakerja, ada fasilitas alat 😊
Iya
Nice
thank's thank's !!
Jooos brathers👍🏿👍🏿👍🏿
Good..
兄弟，我对你制作的东西非常感兴趣，请问有图纸吗
抱歉，无法使用。
@@pcpairgunschannel It's okay, I'm looking forward to your new work
with that much advanced tools you can make a real gun already
I'm here for diy 😭
Air guns are more complicated than firearms often. I am not gonna make firearms thought, prohibited by law.
Big power
Can I use Copper instead of aluminum, and is aluminum expensive?
Copper is very expensive And aluminium is the cheapest metal. Copper is A bit unusual but would work
@@pcpairgunschannel can you please make Video on how to make a regulator that can change its capacity from the outside. Thank you for your effort❤️❤️
@@عثمانجمعة-ج2ث it's complicated but maybe one day I will make videos about regulators
If price is a concern copper is more expensive than aluminium and weaker too, you'll need more material and thicker walls on the reservoir to achieve same strenght at equal amounts of pressure, raising the price even more.
Aluminium 6061 tebal 3mm tekanan 3000 psi tidak dianjurkan karna sifat aluminium mudah korosi
Puedo hacer uno con un tubo de aluminio de 30 mm a 20 mm?
Por supuesto, eso ejercerá aún más presión.
một cái bao nhiêu em mua một cái
not for sale
請帶上手套吧，金屬很小很小會刺進皮膚又看不到刺
操作纺纱机时不应戴手套
A có cái vang ngắn ko a ship cho e với
Is this tube 7075 aluminium?
It is 6061 aluminium
Anh có cái va sóng hoi ngắn
Hey bro. Whts up? I want to increase the range of my sr1000s springer air rifle. Any guidence. Plz
Salam aleykum
Increasing the power of a spring powered air gun cannot be done the same way a PCP air gun can be tuned. All you can do is replace the spring for a stronger one, you might find some stronger springs online if you know the specs of the sr1000s spring.
@@pcpairgunschannel jazak Allah. Very helpfull the information. Be blessed. ❤
Duralium kah ini...??
yes, aluminium
尺寸可以详细说明吗？感谢您
salam saya. Berapa panjang dan berat tangki tersebut?
40cm, about 0.4kg
@@pcpairgunschannel Terima kasih
Hello, my friend. If this is an SS 304 tank with the same dimensions and sizes, what will its approximate weight be, my friend? Thank you. @@pcpairgunschannel
@@markjonior about 1200 grams, because 304 stainless steel is about 3 times heavier
@@pcpairgunschannel Terima kasih atas tanggapan Anda. Salam bagimu
When is receiver coming???
in a few weeks to a month, i will make hammer and trigger first.
Buy some correct carbide tool tips for aluminum, un coated polished carbide.
HSS would be best because carbide isnt beneficial on mini lathes due to lack of torque. I will learn to grind my own HSS tooling
Belum tidur bg
More sir
Ua ib rab rau kuv o
什么材质？
6061 aluminium
How much to make one
sorry, i can't sell them due to courier policy
Dude! Your gonna get a nasty cut on your hand playing with the swarf (the curly bits of metal coming off the cuts your making). One day your gonna grab and it will bite you.
So what should I do
@@pcpairgunschannel don't touch it, use pliers to remove it. And certainly not when it's moving
@@ronmillis8143 okay, I will try to keep your advice in mind. I am still new to machining (about 6 months in)
@@pcpairgunschannel also lot of research and reading about speeds and feeds, lathe tool geometry. If these combined correctly you shouldn't get great lengths. It's nasty stuff. Literally thousands of pics of people who've been hurt by it.
Di indonesia ada pcp jawa 6000 psi tapi tidak pakai drat pakai pantek
How to order sir ?
I'm sorry, it's not for sale. This is just for entertainment
1:33 very, very dangerous you use your finger. Serius damage is real.
Magkano pagawa ng ganyan boss
not for sale boss
Dude i take it you have no proper thread cutting on your lathe ? are you totally gauging it by hand and hoping for the best ? 😁🤘
I could have done it but there was an issue
I'm guessing like on my mini lathe slow speed is terrible so I also turn the chuck by hand. The lead screw is however connected with the right gear ratio for the pitch. Your using slow speed muscle instead of crappy electric motor 😅😅😅
@@andrewworley8946 Yup. slow speed is better on actual big lathes rather than these mini lathes.
Cantik karyamu bg.sayang tidak produksi
@@pcpairgunschannel.i
How much po
sorry, i can't sell due to courier policy in my country
Aluminium 3000psi🤣
yes. this is safe, 3000 psi is a third of this tube's burst pressure.
@@pcpairgunschannel no safty!!! aluminium minimal tebal pipa 5mm
@@jihadramadhan8295 there are specific safety measurements. 3mm wall with 28mm od is max 3500 psi
In Indonesia there are PCPs with 38mm od 3mm wall aluminium tanks for 2500 psi.
@@pcpairgunschannel no Indonesia pcp 3mm stenlis and aluminium 5mm
@@pcpairgunschannel Indonesia pcp dural max pressure 2700 psi and ful stenlis pcp 3000 psi
Aluminium 3mm 3000psi not safty
You like doing these videos ???????? Well if so I would get your miss and digits as far away from the lathe chuck as possible it may be a small machine but do not doubt it it will do damage to any part of your body especially keep your finger out tube's with sand paper or cloth I cringed for you when you finger banged that thread u cut it will twist your finger off in a split second young man your adolescent of working around mills lathe grinders is obvious watch some videos on how too respect a lathe I'm not bashing u I'm trying to save your digits
Продай чертеж
Hello! Could you help me with mine airgun project? Do mind talking by whatsapp?
Duralium kah ini...??
ya