I get a 2016 doosan compressor engine, when using the compressor I getting 105 when I increase the pressure, the engine starting 2 smoke black black black n the rpm is 2300 to 5000, can u tell me how I can reduce the rpm manual
Good morning Gull, I wanted to know if you can help me with an issue I have. We have this governor mounted on a generator with a Doosan engine. Originally the Doosan had the dsc 2013 but it failed and we replaced it with the 1000. The engine runs fine at no load especially after applying the auto pid. But once the unit takes load it goes into over speed. We assured we configured the governor to the proper engine model and settings for speed. We verified nothing was binding the actuator and that it was clean. Filters were replaced to ensure proper functionality but yet we still have this issue. The only other thing I can think of doing is trying to configure the controller manually once we apply load to it. Your recommendation would be greatly appreciated.
Did you Check or Replace Fuel Line System, Specially Main Fuel Filters, & Bangue Filters. if fuel system are clear, then did you check actuator, is it working properly on NO load, mean running stable RPM. after that check Injector.
@@gullhameed3083 thank you for getting back to me. Those we're all checked. The only thing I can think of now is adjusting the F-load adjustment or the proportional manually. But this only happens with load. This happened once we replaced the original dsc2013 to the dsc1000. Everything ran fine with the dsc2013, but it was burnt up on a poor contact. Here's the kicker, it doesn't do it all the time and the load and type of load is the same each time. No vdf or motors just lighting, ac and standard appliances.
@@gullhameed3083 oh and I wanted to mention, the governor shuts down the engine before the controller of the genset even has a chance to acknowledge the over speed.
Nice video sir,
Weldon Gul. Adnan Hashmi
Good Work Gull Hameed
Very useful. Good Work
I get a 2016 doosan compressor engine, when using the compressor I getting 105 when I increase the pressure, the engine starting 2 smoke black black black n the rpm is 2300 to 5000, can u tell me how I can reduce the rpm manual
GOOD EXPLATION.
ahammed bro , who to configer {set} this digital governor with dse8610 deep sea modul to synchronizing in doosan gen set,
Nice bro
Do you have link for PC SPftware downloading for this Doosan Speed Controllers ?
MANUAL ou pdf stp, pour c'est carte .et schéma de câblage
from where i can buy Digital Speed Governer DSC-1000,
ya gotta love it" when they dont put any links or info on where to buy something! geezz!..
Can you explain to me how to increase the voltage capacity, thank you ، I have a 510 generator KVA
Good morning Gull, I wanted to know if you can help me with an issue I have. We have this governor mounted on a generator with a Doosan engine. Originally the Doosan had the dsc 2013 but it failed and we replaced it with the 1000. The engine runs fine at no load especially after applying the auto pid. But once the unit takes load it goes into over speed. We assured we configured the governor to the proper engine model and settings for speed. We verified nothing was binding the actuator and that it was clean. Filters were replaced to ensure proper functionality but yet we still have this issue. The only other thing I can think of doing is trying to configure the controller manually once we apply load to it. Your recommendation would be greatly appreciated.
Did you Check or Replace Fuel Line System, Specially Main Fuel Filters, & Bangue Filters. if fuel system are clear, then did you check actuator, is it working properly on NO load, mean running stable RPM. after that check Injector.
@@gullhameed3083 thank you for getting back to me. Those we're all checked. The only thing I can think of now is adjusting the F-load adjustment or the proportional manually. But this only happens with load. This happened once we replaced the original dsc2013 to the dsc1000. Everything ran fine with the dsc2013, but it was burnt up on a poor contact. Here's the kicker, it doesn't do it all the time and the load and type of load is the same each time. No vdf or motors just lighting, ac and standard appliances.
@@gullhameed3083 oh and I wanted to mention, the governor shuts down the engine before the controller of the genset even has a chance to acknowledge the over speed.
i need conect to Pc. Please to me
Please help the this controller PC software
Maruti tour s me se speed ge ke se remove kare