The idle RPM of the engine is usually set at 60% of the rated RPM, switchover time from idle to rated depends on its rated RPM, usually for a 1500/1800RPM engine 30 seconds for a turbocharger and 20 seconds for a supercharger .
I need buy one and try to adapt and put on my gas generator. Because I have serious problem with voltage variations with the original mechanism for throttle control. And my inverting machine every time protect for heavy voltages fluctuations. THANKS FOR UPLOAD THIS VIDEO 📹 !
الهندسة علم متعددة تركيب وتنظيم وتحسين الاداء وتطوير الوسائل المادية من اجل افادة الانسان لتوفير وقته وجهده وزيادةإنتاجة t.me/ProEnWd يشرفنا اشتراك معنا علي قناتكم تلجرام
*Droop is based on a speed sensor frequency of 4000 Hz. and an actuator current change of 1 amp from no load to full load. Applications with higher speed sensor signals will experience less percentage of droop. Applications with more actuator currant change will experience higher percentages of droop. See droop description for specific details on operation of droop ranges. When used with the ADC100 actuator the droop percentage will he less due to the actuators low current consumption. **Protected against reverse voltage by a series diode. A I5 amp fuse must be installed in the positive battery lead. ***Protected against short circuit to actuator (shuts off current to actuator), unit automatically turns back on when short is removed
The educational subject video has been very nice!!❤
This is about the first video I've seen that has kind of explained what the adjustments do.
Super! Helped me a lot to check my generator settings! I'm from Ukraine. It's 2022 now.
Thanks for sharing this video very informative
thank you for the post, very essential.
great work mam
Very nice explanation
Good information
you save my day
Thank u
most new engines dont need this controller anymore.
love this
D1 and D2 switch off then how to adjust Gain and stability??
what would the idle speed used for? runnings 1800 rpm when would the idle speed come into play?
larry
The idle RPM of the engine is usually set at 60% of the rated RPM, switchover time from idle to rated depends on its rated RPM, usually for a 1500/1800RPM engine 30 seconds for a turbocharger and 20 seconds for a supercharger .
What model number is the 60hz blue controller?
Hello Sir interesting blue speed controller where to purchase this product compatible cummin engine?.
You can get them from Chinese websites
Ok thank tqvm Sir
I am doing a project
I need your advice for complition. Are you willing to help ma'am
Vary good
Super
What the F is a "milinater" and where do you catch one?
I need buy one and try to adapt and put on my gas generator. Because I have serious problem with voltage variations with the original mechanism for throttle control. And my inverting machine every time protect for heavy voltages fluctuations. THANKS FOR UPLOAD THIS VIDEO 📹 !
thanks
You are welcome
جيد
شكرا لك متابع الهندسة الاحترافية ProEnWd
الهندسة علم متعددة تركيب وتنظيم وتحسين الاداء وتطوير الوسائل المادية من اجل افادة الانسان لتوفير وقته وجهده وزيادةإنتاجة
t.me/ProEnWd
يشرفنا اشتراك معنا علي قناتكم تلجرام
Useful thanksss
DKG 253 ?????
Nice
What is the function of droop
droop (Jumper K-L) can help stabilize the system for troubleshooting.
*Droop is based on a speed sensor frequency of 4000 Hz. and an actuator current change of 1 amp from no load to full load. Applications with higher speed sensor signals will
experience less percentage of droop. Applications with more actuator currant change will experience higher percentages of droop. See droop description for specific details on
operation of droop ranges. When used with the ADC100 actuator the droop percentage will he less due to the actuators low current consumption.
**Protected against reverse voltage by a series diode. A I5 amp fuse must be installed in the positive battery lead.
***Protected against short circuit to actuator (shuts off current to actuator), unit automatically turns back on when short is removed
mega.nz/folder/kWRSCRTK#SPr0Z9FnDkID5_V-LyUm4g
Droop is a drop in speed with load, usally used for synchronised generators.
Eine Syncroniesierung in Deutsche Sprache wäre super.
6 BT . English.24। ਵਾਲ। ਰੂਟਰ ਪੰਪ। ਜਰਨੇਟਰ 140 .Kva . ਵਾਸਤੇ। ਸਪੀਡ ਗਵਰਨਰ ਇਲੈਕਟੋਨਕ ਚਾਹਿਦੇ। ਰੇਟ। ਤੇ। ਫਿਟੇਗ ਵੇਰਵੇ। ਭੇਜੋ ਜੀ
قوه
تسلم
لو الشرح يكون بل لغه العربيه
Hi
hi dear