Replace scooter front brake pads
Вставка
- Опубліковано 2 бер 2016
- 150cc Gy6 Scooter Disc Brake amzn.to/2uPFBV9
Chinese Scooter Service Manual amzn.to/2LBfWb8
Donate to Virberello for Parts rb.gy/gzrtit
This video will help you to change the break pads to your scooter or motorcycle you will need around 30 minutes of your time.
• Replace scooter front ... - Навчання та стиль
You deserve a nice Milwaukee Fuel cordless ratchet. Every time I see you turning a bolt it reminds me how quick I can perform mechanical work. A must have!
Ah ah ah you are completely right my friend thank you for watching my video
I now have to go do my 50cc taotao thunder scooter..Thank you for the instructions....
Hello my friend thank you for watching my video
DUDE! I use your vids all the time, thank you so much for doing this!!!
Hi and Thank you for watching my videos :-)
Thank you sir, a very helpful video.
Hi there brother. Do you have a brake change video for scooters with front drum brakes..? Or a front brake conversion from drum to disc, and what all is needed if converting from factory drum brakes. Also, thanks a lot for all of your videos. You've helped me a ton. I've noticed your scooter upgrades with some performance parts. A video of what upgraded/performance parts you liked and what you've replaced back to factory parts or other/better brand parts would be good. Thanks again, keep the videos comin.
Hello my friend no unfortunately I do not have a video for front drum brake. Thank you for watching my videos
Thank you. Very helpful video.
Hello Casey thank you for watching my video
thanks for the video virberello
Hello Maurice Thank you for watching my videos :-)
Good video!
+Jesus'ScooterVids Thank you my friend :-)
Good instruction!
Hello DKJ thank you for watching my video
Good video. Thanks
Thank you for watching my video
This videos are the best quick question how can I fix pressure on my front tire on my scooter
front tire don't have pressure ?
Hi Carlos if you do not have any leaks in your system just open the valve at the caliper squeeze the front brake laver and close the front caliper valve without releasing the Lever after you close the little valve you can releasing the Lever and test if the break work do that many times until your break work at the best. Thank you for watching my video
virberello GY6 Tips and Tricks thank you so much i find your work and videos the best of the best. 🙏👍👍👍👍👍🔝
Thank you @@carloscuellar7956
So true about brake cleaner in the eyes. Not a joke.
Thanks for the videos! They have helped me a lot.
I have run into a problem. After pushing the pistons in to remove the brake pads and install the new ones, the pistons are not pushing the brake pads when I pull the brake anymore. It feels like the pressure is gone and the pistons don’t push anymore. Do you know what I need to do to get them pushing again?
Hello Neil check if you have brake fluid on the top resevoir because if you have a little fluid sometime you need more to fill up the caliper other thing you can do is open the caliper valve put a container underneed pull the brake 5 times and the 5th time hold the brake level in an at the same time close the valve at the caliper to give pressure to the brake system . I hope this can help you
Thanks for the help! I’ll have the TaoTao going in no time. You’re the man!
Mine has some kind of a stainless steel spacer between the pads, can I replace the front pads and don,t need that? Just curious, anti rattle maybe?
Hello Mark if you have a spacer keep the spacer and make sure the new brake pad look the same shape in your scooter . Thank you for watching my video
thank you :)
Hello my friend thank you for watching my video
Perfect❤❤❤
Thank you for watching my video
Hi Virberello sunny southafrica here again when my gy6 scooter rolls forward it squeaks but backwards nothing its coming from the front any idea the problem..thanks again
Hello my friend check this video ua-cam.com/video/3MPf-1hyrSo/v-deo.html i think is your bearings
@@VirberelloScooterTips thanks Boss... to regrease the bearing..i only have a side stand what to do sunny southafrica 150 zapp
i have a problem when i changed my pads the brake is weak as 30% this can the pads not matched with disk ?
Hello my friend many times when you we change the brake pad we send the brake fluid back to the reservoir so you will have to reset the pressure on your brake fluid line ok step one open the small valve at the caliper do not remove the valve just unscrewed few turns press or better pull the lever of your front brake 3 times and at the last pull do not release the lever at the same time at number 3 pull screw in the valve at the caliper and your brake should be good if this did not work do it another time until your brake lever is hard.
@@VirberelloScooterTips thanks ❤️❤️❤️
It works with me thanks ❤️❤️
Hi sir, on my vespa scooter the brake handle on the right side are very hard to squeeze is this normal or should they move with ease?
Hello my friend I have the feeling that you need to flush your brake fluid front brake should not be hard for sure your fluid is getting old and thicker . Thank you for watching my video
@@VirberelloScooterTips thankyou sir, I greatly appreciate you taking the time to respond to my comment, my Vespa will run and rev the back tire will spin when on the kickstand. As soon as I sit on it the scooter won't budge. I lifted the scooter and tried to spin the front tire it's very stiff and will turn but has alot of resistance. Should the front wheel spin freely when the brake isn't engaged?
Hello yes the tire should be spin freely with a very light resistance
Where can you pick up the brake pads at ?
Hello Timothy I always go on Amz amzn.to/2TOzYCC this one is with only one cylinder at the caliper and this amzn.to/2ysHMmg is with 2 cylinder at the caliber make sure you buy the right pads. Thank you for watching my video
@@VirberelloScooterTips thank you ! I'm learning as I'm watching your YT Videos. 👍👍
Ciao ✋✋scusa se te lo chiedo, tu ne capisci più di me dei freni dello scuter gy6, vorrei mettere un disco maggiorato dietro, sapresti dirmi quale potrei metterci di sposta pinza x un disco da 220 mm, grazie in anticipo ✋✋
Ciao Humberto e' una modifica che non ci sono ancora arrivato l'unica e' cercare in line per vedere se gia' vendano un kit di qualita' buona e seprattutto sicuro
Ciao su UA-cam non ci sono video x il mio caso, su aliexpres ci sono 2 kit che potrebbero andare bene ma non ne sono sicuro al 100 x 100, grazie ciao 🖐️🖐️🖐️🖐️
❤❤❤❤🎉🎉🎉🎉
Thank you for watching my video