I have a 2011 Chevy Suburban 1500 LT. The code is P2723 pressure control solenoid Valve 5 stuck off I was told I would have to replace my whole transmission module. Was thinking maybe it could be more simple. Hope you can help me
Dear sir, could you please advise. I have stock 6L80 on my 2011 chevy camaro SS. I found UPDATED Valve Body Spacer Plate w/ 8 Check Balls 10-Up. Can I use it on my stock car?
Hi I have the 6l90 in my truck. My question is , the plastic pass through connector......does it have to be removed before the valve body will drop out.....or will it come out as is
Hi I just replace my valve body I follow all the steps put it back but now my transmission is not shifting the light of the dash dont change to any rear neautral or drive do I need to do a reprogram? Please help me
Hello sir, and thank you very much for this clear video. I followed your directions but now my 6l80 is very sluggish and it seems to be stuck in 3rd gear. Any info on that issue? Thank you.
At 3:36, that lever... I broke that tryin to get my trans pan out on my 2014 sierra 5.3 4x4. I think it's pulled down. So what's gonna happen if I just replaced the filter and bolt everything back up and let it ride? Because it seems like you still need those torq bits to be unbolted for the valve body to drop
@@brandonnguyen1486 sounds good to me then I was going to buy a valve body to fix the clip but seems like no need for it. Thanks for ur help after watching so many videos and being in so many forums seems like me and you are the only people to ever somehow break the clip.
So, I got the thing apart and replaced my pressure switches but I cannot seem to press the connector back over the wiring harness without forcing it? Help...
FROM THE BOTTOM OF THE TRUCK IT LOOKS PRETTY NEWISH, , IF THATS THE CASE , ITS A REAL SHAME WE HAVE TO CHANGE OUT A VALVE BODY, INSTEAD OF COMPUTERS BEING A BENEFIT TO US ITS ONLY BENEFIT TO THE DEALER AND THE SHOPS, DAM SHAME $$$$$ .
thank you very much for clear directions and clean camera footage. This information was what i was looking for...
x2 TY sir!
this brings me back to transmission apprentice days. good ol' times I want to go back to.
Bolt extractor set works just as good. If you don’t want to get the snap on specialty tool
I have a 2011 Chevy Suburban 1500 LT. The code is P2723 pressure control solenoid Valve 5 stuck off I was told I would have to replace my whole transmission module. Was thinking maybe it could be more simple. Hope you can help me
Hey there. I have the same issue on my 2015 Tahoe LT and was told the same. What did you end up doing if I may ask?
Do you know symptoms of a bad pressure switch.. and would you have a cel light on
Is there a way to replace just a single solenoid that’s bad?
Dear sir, could you please advise. I have stock 6L80 on my 2011 chevy camaro SS. I found UPDATED Valve Body Spacer Plate w/ 8 Check Balls 10-Up. Can I use it on my stock car?
Yes.
Where did you buy this from and how much? If so can you please send me the link pressure solenoid 5 is bad in my trans and need to buy the part
How do you replace shift solenoid for code p2714?
I have a problem shifting third to second roughly will that help replace valve body chevy express 3500 2018 6.0l
Thank you for the excellent video. Is it really that easy ??
I will be tackling this project next weekend.
It's pretty easy. I hope all went well with yours.
Hi I have the 6l90 in my truck. My question is , the plastic pass through connector......does it have to be removed before the valve body will drop out.....or will it come out as is
It will come out as is, you just have to wiggle it.
Hi I just replace my valve body I follow all the steps put it back but now my transmission is not shifting the light of the dash dont change to any rear neautral or drive do I need to do a reprogram? Please help me
yes
Have you found a solution?
Same issue did you figure it out?
80 and 90 are the same? 🤔
Do you need to reset after replacing it.
Hello sir, and thank you very much for this clear video. I followed your directions but now my 6l80 is very sluggish and it seems to be stuck in 3rd gear. Any info on that issue? Thank you.
Doubt he is answering at this point ...lol
At 3:36, that lever... I broke that tryin to get my trans pan out on my 2014 sierra 5.3 4x4. I think it's pulled down. So what's gonna happen if I just replaced the filter and bolt everything back up and let it ride? Because it seems like you still need those torq bits to be unbolted for the valve body to drop
I did the same thing just recently what did you end up doing? Any issues after?
@@omargarcia2648 let it ride. No issues
@@brandonnguyen1486 sounds good to me then I was going to buy a valve body to fix the clip but seems like no need for it. Thanks for ur help after watching so many videos and being in so many forums seems like me and you are the only people to ever somehow break the clip.
What am I supposed to do when the tcm clip is stuck open???
Lmao
So where is the shift solenoid located at for this transmission ?
So Getaway cars rebuilds them? I can seem to find them online, do you have a link
getawaycarz.com/
So, I got the thing apart and replaced my pressure switches but I cannot seem to press the connector back over the wiring harness without forcing it? Help...
See Chris response above ....your SOOL
WHERE DO YOU SEND IT FOR REBUILD?
Great video I appreciate you .
Hey is this for chevy camaro 2010
What are the torque specs of the 6 bolts on the valve body?
18ft lbs
When should you change this?
Your VB only when it needs it
Great video.
can you remove techum without removing valvebody
?
No sir, you cannot.
What is the part numbers for the all shift solenoids and TCC solenoid and where to get them?
The solenoids cannot be changed, they are part of the THECM.
@@asylummotorsports5997 oh that’s a bummer I’m pretty sure my solenoids are bad
@@asylummotorsports5997 does this include the pressure control sensor solenoid?
@@asylummotorsports5997 is the pressure control solenoid in this valve body?
The thecm is connect to the valve body correct ?
What’s the torque foot per pound
Ur gonna sleep outside the house because of that camera man joke
FROM THE BOTTOM OF THE TRUCK IT LOOKS PRETTY NEWISH, , IF THATS THE CASE , ITS A REAL SHAME WE HAVE TO CHANGE OUT A VALVE BODY, INSTEAD OF COMPUTERS BEING A BENEFIT TO US ITS ONLY BENEFIT TO THE DEALER AND THE SHOPS, DAM SHAME $$$$$ .