Resin bound aggregate drive way removal and replacement. chipped up
Вставка
- Опубліковано 23 лип 2022
- Resin driveway removal (took 5 hours) and replacement. (took 4hrs) This was a lay that was 4 years old but due repetition of car front steering tyres scrubbing through 18mm directly under
where they parked I had to replace all 13m2 as it wouldnt look right patch repairing.
I believe the aggregate and resin mix was bad as I used a 50kg tub mixer and didnt half the resin properly. Then that tub mixer broke down aswell. not helpful!
The aggregate wasnt the correct sizing being all 1-3mm
so on this lay we used a 100kg mixer exact mix reccomended and it went very well.
Prep was, chip up, sweep, hoover, primer, lay
I wouldnt use 50kg tub mixers again.
only mix the full 100kg stone, resin and sand each time exactly to timings.
Music: Fumblerooski
Musician: LAB HITS-Felix Manzi
URL: lyra.sourceaudio.com/