Це відео не доступне.
Перепрошуємо.
How to Hang Very Heavy Things on Dot and Dab Plasterboard Walls - Works EVERY Time
Вставка
- Опубліковано 3 бер 2023
- Today i will be showing you how to fix heavy items to dot and dab plasterboard walls the easy way. Trying to hang a tv on the wall? or maybe your trying to hang some kitchen cabinets or radiators? This method works every time and never fails. We will be using the core fix fixings and i will be showing you how to use them. If you like the content leave a like and please subscribe for more content like this as I've got a lot more to come and there will be something that will help you out.
⚪ Buy The Items Seen In This Video Below
🌟 Corefix Fixings - amzn.to/3IYmbU9
🌟 Masonry Drill Bits - amzn.to/3KHG0Ao
🌟 Tracer Pencil - amzn.to/3WVwdJG
🛒 My Shop -www.amazon.co.uk/shop/thediyguy
► BECOME A MEMBER OF THE DIY CLUB Click! 👇🏼
/ thediyguy1
► Get FULL access to the Discord Group and other perks!
Follow me on Instagram 👉 the_diy_guy_youtube
Thanks for watching The DIY Guy. My mission is to bring you the best Tips, Tutorials and Tools to help you learn and save money.
Please be advised that this is only a guide which is intended for informational, educational and entertainment purposes and The DIY Guy cannot accept responsibility for any work undertaken. Be safe and have fun! The Amazon links above are affiliate links and as an Amazon Associate I earn from qualifying purchases. I may earn a small commission if you purchase via the recommended links, however this will not cost you any extra.
Do you think there’s a better way to hang heavy items on dot and dab walls? Let me know below! Cheers
I used these to hang a large radiator that had been pulled off a dob and dab wall, all the brick was blown, so redrilled the wholes and used these. Brilliant fixing, definitely a better way.
Showed my dad who's a decorator with +30years experience, he's now using them too.
I have core fix all over my place, if it needs more then a threaded rod with expoxy, some nuts to keep the distance.
But maybe the most secure way is to make your own dot under the plasterboard and use a normal fixing
Rigifix mate. 👌
some of that stuff that won the "this stuff sticks stuff to the walls" from that test you did a few weeks ago 😁
Corefix is my go to fixing for any dot and dab walls. Absolutely brilliant
This is brilliant, I had to hang a 60kilo radiator on the wall and used this same method rated up to 100KG. Can confirm when done properly these things ain't going anywhere. Worth noting, you will never get them out again, so make sure you put them in the right place 😀! Yes, I learned that the hard way so you don't have to!
I’ve used these fixings a few times and they are very effective
They are indeed
Me too. Used them to fix kitchen cabinets ( I used a rail along the top of the wall and used many of these fixings - then hung the cabinets off the rail )
Hello DIY guy I have purchased some corefix fixings today 04/11/23 for the first time I am going to use these on hanging a television into plasterboard wall I am not a DIY person but this product makes me think I can do this I have now subscribed to your channel this fixing means I can get into the wall behind the plasterboard good informative video
Initially, had no clue what a dot and dab wall was (casual DIY'er), but that cleared it up and top video. Stumbled upon your channel looking for radiator levelling vid's and now watch all your vids, nice one that man and anyone reading this needs to sub this guy, bloody helpful stuff.
Awesome! Thank you!
Used these a few times now, essential in my job as a handyman when fixing to fit and dab walls, especially in new-build properties.
Your absolutely right
I’ve got a 36kg 75” Sony to hang today. I’ll be heading out to get these fixings though first. Thank you so much pal! 🙏🏻
I'm a total amateur, but have used Corefix a couple of times and can attest to them being reliable, strong and easy to use fixings.
I usually use a bradawl to go through the plasterboard first; I think it makes for more accurate drilling and also allows me to confirm I'm hitting internal brickwork.
👍 Thanks for sharing
That's what I do and then widen the hole with a Philips screwdriver just to make sure it is safe to drill behind the plasterboard.
Used these couple years back to hang a heavy shoe cupboard which had no floor support ( wife's choice obviously). These fixing are brilliant !
Absolutely 👍
Corefix fixings are fantastic used them on a few TV mounts. When using them though I always wondered if the 10mm drill bit was slightly too large. .The negative for these is the screw itself having a countersunk head. Would be much better with a nut hex head
I had to put some cupboards up in my two daughter's bedroom when we re-decorated, I found these recommended on another DIY channel(sorry!), I have to say they are absolutely brilliant.
👍
Came across this Vid and I had not heard of these fixings before. I have some on order already. Cheers
Anytime 👍
Yes used these on a pain in balls curtain pole, it’s never coming down now,
Really Good
Absolutely 👍
Pricey, but simply the best! 👍
Couldn't agree more!
Great video, thanks! Went and got some of these for a 20kg mirror and they do feel absolutely solid.
Great to hear!
I've got to put my daughters large tv on a brick chimney breast, so this video came at a very opportune moment, nice one.
Anytime 👍
We use those at Clarks Home Improvements. They are very impressive, and leave us feeling confident that our kitchen cabinets will not fall off the wall
Great to hear!
That's great, glad to hear our fixings are doing a good job for you! If you happen to have photos of a recent Corefix job you've done, please share them with us!
Nice one mate. The fixings that came with the bracket are absolute gash!
Cheers for that. Pretty handy when it comes to DIY but every house ive lived in has had solid brick walls, now im in a newbuild with plasterboard walls so this helped massively. Cheers
Nice touch putting a flat washer on a countersink screw.
I never miss one of this guys videos, he’s my reliable go to if I need to know anything DIY, Why 🤔 because he’s brilliant 👌can’t be beaten on info ! Thank you & keep up the great work !
Wow, thanks!
Can you please do a video on measuring lengths when doing mitres for say kitchen cornice, I don’t have any problems finding the angles it’s the lengths & you always explain everything in simple terms, it appears nobody has made a video on UA-cam about this subject ! Thanks
They are very good for kitchen wall cabinets too.
Yes they are!
Used these for kitchen wall units. Great bits of kit.
Yes they are!
brilliant D.i.y guy!! your still the best....
Thanks a lot
Brilliant video, very concise and easy to follow, I'm ordering the Corefix system as we speak, thanks for uploading.
Glad it was helpful!
Used these for several radiator replacements and a TV mount. They are very good. My only tip - is to hammer the metal rod in place prior to installing in the wall. I've had a couple where the wall plug face snaps off whilst hammering the rod in.
Begs the question "why doesn't the core just come Pre fitted in the plug?" 🤔
Sounds like the hole isn’t 10mill.
Would this fixing crack a wall tile which has been installed on a dot and dab wall ? I have a heavy tower unit to fit, do you think the hole in the tile should be 11mm and then 10mm throttle plasterboard and wall, I just think that if you hammer the metal tube in it may crack the tile
Couldn't agree with you more. We hung an extremely heavy mirror using these fixings, and nothing else (at least so I think) would have worked as well. Fantastic presentation, and particularly so if you've never used these fixings.
Thanks a lot 👍
Very helpful, thank you. And nice tats...very Yakuza 😎.
Cheers dude I'm struggling with these dot dab walls.
Great video !! thanks
You are welcome!
Great video. Added benefit the screws (with washer) are smaller than the supplied bolts, allowing for a bit of levelling room on the bracket. If using SDS, I'd start with a smaller bit first as a pilot, if a novice. As I said, great video again, always bang on mate 👍
Thanks a lot 👍
Well done 👏🏼 👍🏼
Thank for the demo and info.
Great just what I need for my house.
Great to hear!
Love these. Use them all over my place. Only issue has been where the plasterboard is poorly supported by minimal dabs - these fixings will pull the plasterboard into the block work given the chance, especially if there are unsupported joins
👍
I would have avoided the prohibited zone near the socket on principle.
Yes, I know you checked, but it's about following best practice and especially as someone watch it this might not understand why
I understand your point. In my case I knew where the cable was because I installed that socket and cable originally.
Brilliant easy to follow video Thank you
Glad it was helpful!
Thanks for the vid, I've never seen plugs with metal inserts like this. Definitely worth trying in the shown scenario, where you've got plasterboard and concrete blocks behind it with a little gap in between.
Also, here is a thought: many a time the screw is a bit longer than the plastic plug, so it would be advisable to mark the depth of drilling on your drillbit according to the length of the screw, not the plug. And when you don't remove the dust from the drilled hole, it might be difficult to insert the plug. That's another reason to drill a bit deeper - then you dont have to worry about the dust, as it will get pushed into the end of the hole.
Great video, we live in a 60’s house, can you use these if it’s thermalight block behind the plasterboard?
THANK YOU FOR YOUR REPLY.🤗
You’re welcome 😊
Love your videos
Thanks 🙏
Thank you🫡
Hi. Great stuff! 👍
Hey, thanks!
They're good for fixing small things to walls (small in size, not necessarily a light load), as you say they stop the board getting crushed. But I would have thought that a bracket like that would spread the load so much that a regular plug inserted into the actual wall, either pushed through behind the board or long enough to reach through (like the corefix) would be fine.
What would you recommend for a hanging a TV on dab plasterboard and cavity block?
Would these work for a folding weight rig to go through the cavity into the brick? Was debating on cutting out the bracket size in the plaster and sticking ply to the brick to fill void and screw through it all to secure
I also use Fischer 80mm Heavy duty Bolts with rawlplug. Great for kitchen cabinets due to being 8mm thick.
Just got a box of these, going to try them on an upstairs TV later this evening. Great video, thanks. 👍
You will do fine with these 😁
Great video. Complete noob here. I want to ask how do you know if your wall is a dot and dab plasterboard wall? What type of walls are there and how can you identify them? I am trying to hang my tv, but it doesn't seems to have any bricks or solid concrete at the back.
Hi there, often you can tell a dot and dab wall by knocking on it, if some spots sound hollow and some solid then it might be a dot & dab wall (the spots that sound solid would be where the "dots" of adhesive are attaching the plasterboard to the masonry). If the wall you're trying to hang your TV on doesn't have any masonry behind the plasterboard, it might be just a stud wall ie plasterboard fixed to a framework of timber studs. In that case the best option would be to find out where the studs are and fix your TV bracket to them with wood screws. If you can, you can always drill a small test hole in the same wall somewhere out of the way to get a better idea of what's behind the plasterboard, just check for cables or pipes first!
Excellent, thanks. 👍
You are welcome!
Dot and dab wall, never heard it called that. Good vid
Thanks
Very helpful video. Please do a quick video on using your brand of cable/stud finder. The one I have isn't reliable, or I am not using it properly.
I’ll see what I can do
great video , thanks
Glad you enjoyed it
what a great video
Glad you enjoyed it
Another cracking video! 😊
Glad you enjoyed it
Hi, how would you hang heavy radiator on dot and dab wall with hollow concrete blocks? What anchors or plugs would you use as these won't work.Thanks
Bullfix fixings are pretty good for dot and dab as well, they can go into pretty small cavities.
Good tip
Look like good fixings, any ideas for lathe and plaster fixings ??
good video !
will it also work if I have timber framed house with plasterboards? There's a cavity between timber frame and outside brick wall.
I live in a timber framed house so no actual solid walls just stud work where I have to use the metal self drill fixings I can only guess that hanging such items on walls like this is a “no-go”
I’m in a timber framed house too sid. Personally I’d cut a piece of the pasteboard out and screw in some batons between the studs where you want to fix the brackets to. You can then just use wood screws to fix the bracket to the wall, but it would mean some patching up
Timber frame house here too, I use Geefix when I need to fix anything heavy.
Tbolt drywall fasteners. I've been using these as my go to. They take some beating!
Thanks a lot lads for the replies they are all a great help
Find the studs in the wall and use strong enough fixings on those studs
I hung me a 1200x800 vertical radiator weighing in at about 45kgs empty so I reckon 65kg with water in it. I used the normal brackets which take 2 fixings each so used 8 of these. I was very very nervous about putting it on the wall as it weighs so much but with Corefix fixings it feels like I could hang my 13st lump on it as well... Tad pricey but they do a great job.
Absolutely, thanks for sharing
great video
Thanks!
You no your stuff mate another good video 👍
Thanks 👍
Thanks for this! Could you do a TV hanging guide but also showing how to hide cables in the wall. Need a UK guide as all the others are US. Thank you
Noted! Thanks
i got these fixings, my mate wanted 8 of them lol even though 4 holds 100kg, maybe extra security for a 77inch tv
👍
I want to use these to hang my new kitchen wall units. My plasterboard is 12mm battern is 30mm then 100mm blockwork , is 100mm corefixing long enough do you think 58mm into the bock is plenty i think? Great video.
Great demo I use these but are you watching that telly stood up? Sore neck time
This is great tutorial. What the hell is a dot and dab wall though?
"How to Hang Very Heavy Things on Plasterboard Walls" - dont, unless you have some solid walls behind! got it!
Thoughts on heavy duty Gripit? I can't figure out if the weight is per gripit. I have a 65" TV, not crazy heavy. Might give them a shot
Would this be suitable for TV mounting on a Kingspan insulated wall, with air gap, then Stone wall (old farm house)?
Thank you 😊
You're welcome 😊
Love this tip matey. Been following you from the super early days - congrats on how far the channel has come. Go smash it!!! 💪🏾💪🏾💪🏾
Thanks a ton! Will do 🤙
Any tips for going through insulation backed plasterboard dit &dab dry lining? The plasterboard (with the insulation on it), plus the dot and dab all adds up to about 100mm!
I use expanding board fixings in that situation or the grip it ones.that gap between board and wall is your friend whereas with dot and. Dab the void is neither here or there. But in all situations avoid-the screw in type they are crap and leave you in a world of pain when they fail
@@garyjohnson5069 Agree about the screw-in type 100%, although the small plastic Fischer ones seem to be OK for pipe clips and the like.
@@garyjohnson5069 you can also use the expanding board fixings on a dot and dab wall, I need a 10mm hole for the ones I use and just drill into the block work behind the dot and dab and that'll give you the clearance that you need for the fixing to go into.
If by chance you hit a dab the fixings will still work, using the setting tool to install the fixing it will expand inside the dab acting like a Rawl plug, you'll never get it back out once in 👍
Rigifix 💪🏻
What device would you recommend for testing if wiring or pipes are behind a wall?
Hello..
I have a dot and dab insulated plasterboard wall..
The insulated plasterboard itself is 50mm in total (12.5mm plasterboard + 37.5 insulation per new standard)
Would this screw type work , I imagine No as the steel sleeve is only 45mm long.
Any better fixing arrangement recommended??
Regards
Would this work for walls that are entirely plasterboard, like in a new build/most new houses ???
This will only work on dot and dab walls
How much weight can these take? thinking of using to fix a pull up bar for my teenagers and avoid them damaging the door frames with those over door types.
Use concrete screws (110mm) with a pre drilled hole of 5mm
Hi there, just found your Chanel- love it. What is the device you used to find out what was in the wall? TIA
how do i know if i have dot and dab?
Would they work with insulated boards ?
what in your opinion are the best fixings for a studded wall? Thanks.
I’ve a video on the channel comparing them 😀
Looking to install a Swing to a plasterboard ( crazy I know) using a bar (supports up to 120kg weight) across so the fittings will be to the left and side of the wall. Basically it's the bar that we are looking to screw to the wall (a plasterboard) on both sides. Do u reckon these Corefix fittings will help?
Better still, have you got any idea the maximum weight it can support?
Btw your page is a saviour, i am going to perfect my skills watching it . Thank you so much
Hi would these be suitable to use for a 65” sky glass tv?
Hi, good video. What make is the cable/metal detector you use? Thanks
Hi, thanks. It’s Bosch
Does this work for the sealing as well? I need to hang 25kg on the sealing
What can l use for a old fireplace wall that keeps crumbling when l try to get lighting bolts into hole.
I advised my son to use CoreFix when hanging his TV to d&d. However he wouldn’t pat that little bit extra so we used normal plugs. Not saying it was right,but his TV is still attached to the wall after 5 years.
👍👍👍 Thank you
Welcome 👍
How can you tell if you have dot and dab wall? Where I want to hang something if I drill through the plasterboard I then hit something hard. Is that therefore dot and dab?
Very nice, Electricity trace inside wall company name and price, thanks
Thanks for the video mate. Really helpful
Glad it helped
What about reinforced concrete walls, what sort of drill do I need to drill that?
SDS is best 👍
Tv wall mounting including bracet £60 London /Essex and Kent
Another great video and learning a lot from your channel. Would these work on insulated plasterboard on a brick wall?
Yes, absolutely. Thanks for following
It depends on how big the space between the plasterboard and the masonry is - for Corefix the max. recommended distance from the masonry to the outer surface of the plasterboard is 45mm, with a gap too big the steel core won't be able to bridge it. So if the plasterboard is 12mm thick for example, it'll leave you a max. 33mm gap.
What is the cable detector you used?😊
It’s a Bosch 👍
Thanks for the tutorial☑️ lucky really as I was going to use Sticks like Handcock 💩
👍
What size washers did you use
Hi Cameron great video 👍🏾👍🏾
I have a question if that’s okay. I’m looking to purchase a detector would you recommend the one you have??
Hi Garran. Thanks. Yes it’s a good detector. I’ve had it 6 years and it’s never let me down but it is a little juicey on batteries
Thanks Cameron. And thank you for the reply much appreciated!
Loving the Channel I’m looking forward to the renovation content. 👍🏾👍🏾