Glad ya finally got it 👍. I built a stand on the front of my conversion to hold a hurculiner box with and inlet and outlet for 4 in ducts to attach to the front wall of trailer. Inside the box is a 49.99 (winter sale) 8000 btu cheap 12 volt compressor window unit with the inlet and return air separated and vents on the outside for the outside condenser parts. Been 6 years now and still surprisingly works too good lol Really easy to work on and even easier to replace if ever needed 👍 Just another crazy but genius conversion idea for everyone 😁👍
Mine is / was doing this also . I put the sensor into the coil & the cycling duration shortened but the unit still froze up . I cleaned both coils & noticed the blower fan was loaded with debris . I cleaned the fins & the air flow more than doubled . I hope that this works
I just got a replacement thermistor from furrion because I thought my freeze sensor was faulty. I knew there would be a resistance associated with temperature but I had no spec or baseline. I compared the new one to the old one and values were the same. So it was probably working as it should. However the new design from furrion is a spike compared to the cylinder style I had. So like yours once it was inserted in between the fins it’s cycling like it should. I only had the problem after I installed the room temp sensor relocation kit. Since it could run nonstop to cool the whole unit it started freezing up. Thanks for the video!
Glad ya finally got it 👍. I built a stand on the front of my conversion to hold a hurculiner box with and inlet and outlet for 4 in ducts to attach to the front wall of trailer. Inside the box is a 49.99 (winter sale) 8000 btu cheap 12 volt compressor window unit with the inlet and return air separated and vents on the outside for the outside condenser parts. Been 6 years now and still surprisingly works too good lol Really easy to work on and even easier to replace if ever needed 👍 Just another crazy but genius conversion idea for everyone 😁👍
I really like this idea. I have 2 boxes on the front of my V. You can see them in my other videos
Mine is / was doing this also . I put the sensor into the coil & the cycling duration shortened but the unit still froze up . I cleaned both coils & noticed the blower fan was loaded with debris . I cleaned the fins & the air flow more than doubled . I hope that this works
I just got a replacement thermistor from furrion because I thought my freeze sensor was faulty. I knew there would be a resistance associated with temperature but I had no spec or baseline. I compared the new one to the old one and values were the same. So it was probably working as it should. However the new design from furrion is a spike compared to the cylinder style I had. So like yours once it was inserted in between the fins it’s cycling like it should. I only had the problem after I installed the room temp sensor relocation kit. Since it could run nonstop to cool the whole unit it started freezing up. Thanks for the video!
I’m so glad you finally figure it out. Awesome!
Thanks, it worked 😊
Are you running the single zone furrion thermostat or just a generic thermostat?
Furion thermostat
The Furrion one
Humm, mine is 1" from the bottom. As i sit here sweating with warm air blowing in my 2023 furion.
Does it keep freezing up?
@@MisfitRZR twice in 3 trips. I have high humidity here in Florida.