I'm running the emanage ultimate on my 2001 celica I boosted! Love your supra build been watching it since day one, you should make some videos on how to use some of the functions for the ultimate
Hey mate, wouldn't you be better off tapping the map sensor directly into the intake manifold? It would give a more accurate measure of the air pressure in the manifold, I think.
I love the vids, thanks for posting them. I have a question for you regarding the emanage ultimate. How do you like it compared to the apexi neo? Do you have timing control with the emanage? Can you raise the rev limiter? I too have an mkiii 1jz with a 60-1 turbo kit tuned with an apexi neo. I'm wanting to step up to bigger injectors but I'm hesitant because I've heard the timing gets crazy when you add bigger injectors with the apexi neo. Thanks! Jorgen
I am running an Trust E-manage Blue on Suzuki cappuccino. want to install an AEM AFR wideband Can I just used connect Cable From and hook the E-manage to the AEM to get the AFR reading? Do I still need to install the AEM sensor to the downpipe? thanks
hey man i know this is an older post, but i have an emanage ultimate, and a 32 bit win xp lap top to run the software, but when i plug the e-manage in, it doesn't download the drivers to connect to it. Do you have any advise for this? i've been trying to get it working in my RB for some time now. Thanks
Just trying to add a little constructive criticism. I'm sure there's a lot of people that don't really care about cussing all that much, but I don't really feel like it's necessary most of the time in your videos. Don't get me wrong, your vids are great and I have really enjoyed your drift missile build, but I feel like they could have a more polished/professional feel to them if you could tone down the language or even "beep" them out. I'm not suggesting changing PMM at all, but speaking as a professional business owner, clear and intelligent communication can go a long ways to getting big sponsorship and building relations. Anyhow, keep it up guys and best of luck to you!
Just saw this because I'm thinking of getting this for my 2zz spyder. Any thaughts on this? Is it any good? I plan to turbo the 2zz next so I'm hoping this would be suitable to use as I'm to poor to get a full ecu etc.
Poor Man Mods Hey man. Good morning. I have this same piggyback to wire into my gs300 with the 1jzgte vvti with single Borg Warner and r154. I am planning on using about 700cc injectors. I'm not looking for more than 500. Did you like this ecu? Not looking to spend anything more. Let me know. Thank you.
The emanage is better than an Apexi AFC but not as good as a full standalone. It is certainly enough to get you to 500hp but you will have more finer adjustably and a better idle with a standalone ecu
Poor Man Mods okay thank you very much for getting back to me I just wanted to make sure that it would get me to my horsepower goal. Well I guess I have some work to do I am currently at approximately 360 370 rear-wheel horsepower untuned so I have some work to do.
Hey I know this is a hella old video as I've been subscribed since before this but I just got an is300 with this ecu piggyback installed already and I'm praying that you can tell me which laptop do I need for it cause someone tried to tell me I need a old 64bit laptop with windows Vista or xp on it. Which I suspect to be true but I NEED TO KNOW WHAT DO I DOWNLOAD ONTO THE LAPTOP SO I CAN TUNE ETC... I'd appreciate it hella bro!
I finally got my Emanage Ultimate to work on my rx7 however my check engine light came on and my rpm tach stop working. I installed the stock ecu and everything went back to normal. Any idea why this is happening?
@@brokexchuch I did not connect my wideband to it because at the time I didn't think you could. I got rid of the e-manage because I kept going through stock ecu's they kept failing on me and plus the e-managed just really isn't that great of an engine management system and I was having a lot of drivability issues. So I went to a Haltech ECU and it made a world of difference and I highly recommend going to a stand-alone ECU over the emanage or any piggyback system
Poor Man Mods Hey man. Good morning. I have this same piggyback to wire into my gs300 with the 1jzgte vvti with single Borg Warner and r154. I am planning on using about 700cc injectors. I'm not looking for more than 500. Did you like this ecu? Not looking to spend anything more. Let me know. Thank you.
I am having problems with my greddy e management ultimate. I have set my jumpers in the right specification and also I got the plug and play harness... and then I have my software set up to my car. my car still doesn't want to start ....do you have any recommendations
No doubt! Much appreciated. Hope to see you rippin some fat skids in your's soon lol. Im setting mine up to drift too. Found some bro's in NZ who just started making a new angle kit for a70's. 50 degrees of lock with steering stops cut and rack spacers. I'm hoping to install this week. I'm gonna try to take some before and afters too for comparison.
what I'm having trouble with this finding the wiring diagram for 2006 Acura TL anybody help me out with this I don't know where to wire it to from the ECU / what wire
+Poor Man Mods will it gains at least 15 horsepower by tuning properly with my 2jzgte.. such as air intake, down pipe, exhaust, fmic, and boost? and gt28 twin hybrids turbo upgrade? thanks..
+Poor Man Mods hey Freddy I'm about to get the greedy emanage for my 1.5jz set up how is yours running so far? And what the max power level can u tune them?
hey just wanted to see if u could give me some feedback on my jumper pin setup i also have a non vvvti 1jz this is what i set them too but not sure if correct jp1: open -----------------------------------------------------jp11: open jp2: open -----------------------------------------------------jp12: open jp3: open ----------------------------------------------------jp13: open jp4: open ----------------------------------------------------jp14: open jp5: open -----------------------------------------------------jp15: 1-2 jp6: open ----------------------------------------------------jp16: open jp7: 1-2 -----------------------------------------------------jp17: 1-2 jp8: 2-3 -----------------------------------------------------jp18: open jp9: open ------------------------------------------------------jp19: 1-2 jp10: 1-2 ------------------------------------------------------jp20: 1-2
New PMM video to watch on a Friday?? Best. Weekend. Ever.
Hahaha hell yeah!
That music though! Feels like i'm playing a Sega Genesis game. Love it!
Hahaha thanks!
I'm running the emanage ultimate on my 2001 celica I boosted! Love your supra build been watching it since day one, you should make some videos on how to use some of the functions for the ultimate
+Dylan G thank you very much, and i may get to that video some day
Ayee thats what im trying to do atm. Whered you install the emanage and are you running an afr sensor or using maf as a load?
Hey mate, wouldn't you be better off tapping the map sensor directly into the intake manifold? It would give a more accurate measure of the air pressure in the manifold, I think.
I don't know if it would really matter, the oem map sensor is connected to vacuum hose also
hey guys love the show I am doing a 1jz swap into my supra and I was wondering if/when you would show us you tuning the car? thanks
hey, i noticed the york college sweatshirt and pa tags, where you guys from? im from Gettysburg and its cool to see semi local guys building cars lol
We are from York, I unfortunately just graduated from York College. Thanks for supporting us!
Sir, did have a video for installing emanage blue to Toyota Corolla AE101
first channel i actually learn from ...
We are glad to help, thank you for the support
That looks easier to install than a S-AFC and a way better setup for tuning. Will it adjust timing too?
It's way easier and bettet, and yes it adjusts timing too
I love the vids, thanks for posting them.
I have a question for you regarding the emanage ultimate. How do you like it compared to the apexi neo?
Do you have timing control with the emanage?
Can you raise the rev limiter?
I too have an mkiii 1jz with a 60-1 turbo kit tuned with an apexi neo. I'm wanting to step up to bigger injectors but I'm hesitant because I've heard the timing gets crazy when you add bigger injectors with the apexi neo.
Thanks!
Jorgen
You only need the white wire for the wideband, but what connection of the 3 Pins in the option port does it connect to?
Man i love that intro!!!!!
Thanks!
I am running an Trust E-manage Blue on Suzuki cappuccino.
want to install an AEM AFR wideband
Can I just used connect Cable From and hook the E-manage to the AEM to get the AFR reading?
Do I still need to install the AEM sensor to the downpipe?
thanks
hey man i know this is an older post, but i have an emanage ultimate, and a 32 bit win xp lap top to run the software, but when i plug the e-manage in, it doesn't download the drivers to connect to it. Do you have any advise for this? i've been trying to get it working in my RB for some time now. Thanks
hey man just wondering where i can buy the plug in play harness that suits the lexus is200/1g-fe? pls help
Just trying to add a little constructive criticism. I'm sure there's a lot of people that don't really care about cussing all that much, but I don't really feel like it's necessary most of the time in your videos. Don't get me wrong, your vids are great and I have really enjoyed your drift missile build, but I feel like they could have a more polished/professional feel to them if you could tone down the language or even "beep" them out. I'm not suggesting changing PMM at all, but speaking as a professional business owner, clear and intelligent communication can go a long ways to getting big sponsorship and building relations. Anyhow, keep it up guys and best of luck to you!
I appreciate the input, I'm on the fence of deciding to be more professional or be more real/raw
Just saw this because I'm thinking of getting this for my 2zz spyder. Any thaughts on this? Is it any good?
I plan to turbo the 2zz next so I'm hoping this would be suitable to use as I'm to poor to get a full ecu etc.
Its oo but a standalone is better
Hey man i hav rb25det maf sensor.. if i install ultimate can i delete the maf sensor?
Poor Man Mods Hey man. Good morning. I have this same piggyback to wire into my gs300 with the 1jzgte vvti with single Borg Warner and r154. I am planning on using about 700cc injectors. I'm not looking for more than 500. Did you like this ecu? Not looking to spend anything more. Let me know. Thank you.
The emanage is better than an Apexi AFC but not as good as a full standalone. It is certainly enough to get you to 500hp but you will have more finer adjustably and a better idle with a standalone ecu
Poor Man Mods okay thank you very much for getting back to me I just wanted to make sure that it would get me to my horsepower goal. Well I guess I have some work to do I am currently at approximately 360 370 rear-wheel horsepower untuned so I have some work to do.
Does it have a plug and play for the Starlet 4efte Etc Ecu
hey PMM I cant find the plug n play harness for the 1jzgte where did you pick yours up at
+Z Man www.nengun.com/greddy/e-manage-option-parts
you guys are awesome thank you!
no, thank you!
Trying to locate the harness for the ultimate to adapt to my 1jz vvti
I had a greddy e-manage blue system in my tercel with a 4efte swap
Niceee
I'm looking to use the emanage ultimate in my starlet... Any info mate?
your intro is awesome!!
Can you go into what turbo you have. like t 3 or 4 . what company. how you like it etc
+Anton Totino did you watch the entire drift missile series? i should have said it at least once in there, its a T3T4
Hey I know this is a hella old video as I've been subscribed since before this but I just got an is300 with this ecu piggyback installed already and I'm praying that you can tell me which laptop do I need for it cause someone tried to tell me I need a old 64bit laptop with windows Vista or xp on it. Which I suspect to be true but I NEED TO KNOW WHAT DO I DOWNLOAD ONTO THE LAPTOP SO I CAN TUNE ETC... I'd appreciate it hella bro!
You need 64 bit XP
Should I turbo or supercharged my 1977 chevy nova?
Turbo!
I finally got my Emanage Ultimate to work on my rx7 however my check engine light came on and my rpm tach stop working. I installed the stock ecu and everything went back to normal. Any idea why this is happening?
What do u think of the Cobb stage 1 tune it's an access port I have hooked up to mazdaspeed 3
I've heard those are good
hey guys im doing the same set up in a z20 soarer , just wondering what site you brought ur harness from
We got everything from www.nengun.com/
What did you guys do with the extra wires on wideband to the Greddy Emanage option 2 port?
We did not connect the wideband to the greddy emanage, we also didnt keep the emanage very long.
@@PoorManModsahh okay, do you remember the reason?
@@brokexchuch I did not connect my wideband to it because at the time I didn't think you could. I got rid of the e-manage because I kept going through stock ecu's they kept failing on me and plus the e-managed just really isn't that great of an engine management system and I was having a lot of drivability issues. So I went to a Haltech ECU and it made a world of difference and I highly recommend going to a stand-alone ECU over the emanage or any piggyback system
hey i just got a greddy emanage ultimate but i dont get the jumpers how do i do it to fit my application
Haha, the end.. I know the feeling you wanna show it off but they just don't care
+Luca Car Mods yup :(
Poor Man Mods Hey man. Good morning. I have this same piggyback to wire into my gs300 with the 1jzgte vvti with single Borg Warner and r154. I am planning on using about 700cc injectors. I'm not looking for more than 500. Did you like this ecu? Not looking to spend anything more. Let me know. Thank you.
I am having problems with my greddy e management ultimate. I have set my jumpers in the right specification and also I got the plug and play harness... and then I have my software set up to my car. my car still doesn't want to start ....do you have any recommendations
remove the emanage and just have your stock ECU plugged in and see if it starts
Might need to do this.
dooo it
keep up the good work
Thank you!
Okay and how do you tune
awsome build! how do you like the emanage ultimate, I'm thinking about getting one for my is300 build
+rett smith thank you, i love the EMU
Did you have to extend your wiring harness originally when you did the swap? I know the 1j never made it to the US so all the harnesses are for RHD
Yeah I had to extend about 20 wires 18 inches to make it into the glove box area
Poor Man Mods ok thanks. Bought a 1J for my Supra so I'll probably be rewatching this series again and taking notes hahah
right on! if you have any more questions let me know
No doubt! Much appreciated. Hope to see you rippin some fat skids in your's soon lol. Im setting mine up to drift too. Found some bro's in NZ who just started making a new angle kit for a70's. 50 degrees of lock with steering stops cut and rack spacers. I'm hoping to install this week. I'm gonna try to take some before and afters too for comparison.
mines always broken it will probably never skid :(
Found a greddy emanage ultimate from a Honda S2000 AP1 for cheap. Will it still work with my Rx7 if I get a different harness?
Yup!
What wideband did you use with the greddy emanage ultimate?
what I'm having trouble with this finding the wiring diagram for 2006 Acura TL anybody help me out with this I don't know where to wire it to from the ECU / what wire
Car is to clean to be labeled a missile dude lol
+DonaldJacksonDrift hahahaha
Is the harmess a t-13 or a t-16
I used a t16 because mine is a soarer 1jzgte
where'd you get the pnp harness from?
you get it from the Freddy website
+Enrique Diaz Freddy*
+Enrique Diaz GREDDY*
lmao
do we need to have a wideband connected?
You absolutely should have one but it doesnt need to be connected to the emanage
@@PoorManMods thx for the info m8
Hey man would a Plug and play harness meant for a Ultimate emanage would it work for the blue if I just connect the plugs I need?
Kind of a dumb question but just wanna make sure before I spend the money on it lol
does this unit gain any powers? thanks.
+lou berador if you tune it properly yes
+Poor Man Mods thanks man. and you have a happy new year!
thank you, you too!
+Poor Man Mods will it gains at least 15 horsepower by tuning properly with my 2jzgte.. such as air intake, down pipe, exhaust, fmic, and boost? and gt28 twin hybrids turbo upgrade? thanks..
you got hose....all kinds of hose. now how are you gonna hide that mess inside?
I got hose in different area codes
Can someone gelöst me, my ca18det doesnt start…
Where did you buy your Emanage?
+Moises Pagan i dont remember
+Poor Man Mods Damn lol. I am looking for one for my supra; thanks for the response though!!!
did he come look at it
No :(
re-uploaded right? I cudda sworn I already saw this.
+Jermaine Simpson yeah i took down the other one and fixed the audio
okk. *wipes forehead* thought I was back from the future again.
hahahah
+Poor Man Mods hey Freddy I'm about to get the greedy emanage for my 1.5jz set up how is yours running so far? And what the max power level can u tune them?
its running great so far, i have no idea what the max power is
Is it still running this ECU guys ?
yup
this was re-uploaded due to audio issues correct?
+rccarz5 yeah i took down the other one and fixed the audio
😀😀😀😀
hey just wanted to see if u could give me some feedback on my jumper pin setup i also have a non vvvti 1jz this is what i set them too but not sure if correct
jp1: open -----------------------------------------------------jp11: open
jp2: open -----------------------------------------------------jp12: open
jp3: open ----------------------------------------------------jp13: open
jp4: open ----------------------------------------------------jp14: open
jp5: open -----------------------------------------------------jp15: 1-2
jp6: open ----------------------------------------------------jp16: open
jp7: 1-2 -----------------------------------------------------jp17: 1-2
jp8: 2-3 -----------------------------------------------------jp18: open
jp9: open ------------------------------------------------------jp19: 1-2
jp10: 1-2 ------------------------------------------------------jp20: 1-2
+Cesar Solares message us on facebook, ill try to send you a picture of our jumper setup
Have I seen this before
+Dylan Prasad i took down the other one and fixed the audio
re-upload?
+Josh Ansin yeah i took down the other one and fixed the audio
Poor Man Mods it's all good man, still stopped by to drop a like!
thank you!!!
Damn that's fucking easy
+88supra719 hell yeah
first
Auto-tune it... LOL
This channel is good but the bright green engine cover and turbo on a red car looks like vomit! Color blind perhaps lol
HAha thanks i might be changing it soon
You only need the white wire for the aem wideband, but what connection of the 3 Pins in the option port does it connect to?