ang ganda boss. I will do that someday. I hope you won't mind if I connect with you and ask for your inputs as well. Congratulations. Btw, what sort of wood did you use here?
Boss tanong sana lang ako sa tulad ko bago palang mag try ng epoxy resin, may slub ako 4" kapal nia at may haba 2.7 mtrs, at may lapad n 5" Ang actual na bubuhusan ko ng resin, boss paano kaya tama pamamaraan, sana mabigyan mo ako ng tama pamamaraan, more power sau iyong chanel godbless po
Your not suppose to seal your edges because when you do your actual pour, the resin cannot absorb into the wood. Your ending up with plastic to plastic bond which will result into resin and wood separation at a later time. Dapat hinde mo seal ang edges mo para ang resin ay sumipsip at kumapit ng husto sa kahoy. Hinde yan tatagal at bibiyak din yan lalo na pag nagumpisa nang mag shrink/warp ang kahoy mo.
Thank for the tip john👍 i was thinking about that too, but the sealing of the edges and the actual pour is just one hour apart.. did it to lessen the bubbles coming out from the wood after i pour..
@@tablaprimerastudio6752 I have seen too many done the way you did it but only to separate at a later time. Believe me don't seal your edges with your future projects. Allow your resin to be absorb and create a mechanical bond with the wood. The process of bubbles appearing is the air being displace by the resin absorbing into the wood. You can always tap your slab to help dislodge the bubbles to float to the surface then burn it of with a torch.
Well done - we really apprecate you posting the supplies used and the steps taken, so interesting.
Galing 😮
amazing.. solid Tabla Primera follower
New subscriber here from pangasinan philippines..
Sarap sana mg diy ng ganyan kaso kulang ako boss sa power tools :(
Wow! Ang galing! Worth watching! Thanks!
maraming salamat sir!👍
Sir anu pangalan ng ilalagay niu po.. Na licqued sir
gusto ko gumawa ng ganto, pero nkakastress hahaha
Stress to the Nth level pre! Pero once you finish it.. worth every second na nilaan mo⚒👍🙌
Sir panalo talaga mga gawa mo. Solid.😍😍😍😍😍😍😍
Maraming salamat sir🙏🙌⚒
Ganda idol
pwede din pala ang laminating epoxy for river table, thought it was for topcoats only....😁
yup! multiple pours sir.
Wow! Lupet brader, ang ganda!
Salamat brader! 👍⚒🍻 haypayb! 🙌
just WoW. nindota oi.
definitely will try to make this project soon. madali lang po ba hanapin/bilhin ang pangkulay/metal pigments?
Ang lupet talaga! Keep it up!
Maraming salamat joyce👍😊⚒
Just Beautiful
ang ganda boss. I will do that someday. I hope you won't mind if I connect with you and ask for your inputs as well. Congratulations. Btw, what sort of wood did you use here?
Ganda ganyan gusto kung gawin pero saan makakabili nyan epoxy?
banges neto!
Thank you! Haypayb brad! 🙌
Hi Sir, congrsts! nice build! Saan po makakabili ng ganyan na epoxy and coloring?
Boss tanong sana lang ako sa tulad ko bago palang mag try ng epoxy resin, may slub ako 4" kapal nia at may haba 2.7 mtrs, at may lapad n 5" Ang actual na bubuhusan ko ng resin, boss paano kaya tama pamamaraan, sana mabigyan mo ako ng tama pamamaraan, more power sau iyong chanel godbless po
saan po nabibili yung pangkulay sir yong mga powder na inihalo nyu po
Hello, san po kaya pwedeng magpagawa ng ganyang klase ng dining table na 8 seater po sana?
Ano po ba ang panghugas ng mga container at brash pagkatapos gamitin?
Nice! Ganda po. Ask lang po saan pwede maka order ng pioneer laminating po?
you can get it at tools for wood sir.
If ever pwede pong magpagawa sa inyo at padeliver na rin?
Damn....its a sin not to like this video!
WHERE ARE YOU LOCATED??
San po nakakabili ng lamenated epoxy
Sir gud morning pwede po ba ma ipadala ninyo sa akin ang mga tama listahan Ng paghalo gusto ko rin po gumawa para sa bahay ko thanks po
Galing talaga boss, pulido. May I ask what coloring to use for solid color? black for example boss?
Salamat sir👍⚒ jet black toner sir pag solid colors.
@@tablaprimerastudio6752 Noted, keep sharing your builds. Very nice
Salamat sir! If may time sir please share and subscribe sa channel😊🙏❤
pwedi rin po sigoro gumawa ng polan gawan sa ganyan
hm po pgwa ng ganyan kung me wood slab n kmi...
May tanong lang po ako sir :
Hindi ba matangal kung hindi pa patay ang kahoy?
👍
Saan po makakabili ng ganyang mixtures Sir?
Karamihan gumagamit ng sanding sealer mahinang pundasyon yan. Bat d nalang purong poly, mas matibay pa.
Sealer all day for woods before poly.
puede po ba mag pagawa pero not table. door po
gaanu katagal ang healing period sir?
Good day po, ask lng po, mga magkano po yung ganyang table? Salamat po...
Pwede po ba paturo anu e memix sa epoxy
Magkano gastos mo boss?
Magkano po Ang 1 gallon Ng pioneer epoxy
panu Yung footing boas
Magkano mabenta yn sir? Salamat sa sagot
Sir anu po advisable thickness pour for pioneer epoxy resin? Kaya ba ang 1.5 inch?
for pioneer epoxy i would stick to less than 1 1/4" mas malalim pa ba sumobra na init mabiyak sir.
How much po magastos sa ganyan?
Naks show of tools.. 👌👏
Paano niyo po na ensure na leveled yung top kahit na hindi nakaa raise yung FSN? :)
good day sir! i ran both sides sa cnc machine on both faces making sure the pieces is already leveled sir.
@@tablaprimerastudio6752 thank you po for replying! Nag hahanap po kasi ako ng tutorial on how to use yung OFA for flattening. Thank you
Sir pwede po ba kayo gumawa nyan saken?
Hi sir! Yes please send us a measage over at tablaprimera facebook page or dm us at instagram. Thank you!
Location Ng shop nyo po
we are located in pasig sir
Pwede po makahingi ng list ng mga tools ginamit niyo for this project?
Your not suppose to seal your edges because when you do your actual pour, the resin cannot absorb into the wood. Your ending up with plastic to plastic bond which will result into resin and wood separation at a later time. Dapat hinde mo seal ang edges mo para ang resin ay sumipsip at kumapit ng husto sa kahoy. Hinde yan tatagal at bibiyak din yan lalo na pag nagumpisa nang mag shrink/warp ang kahoy mo.
Thank for the tip john👍 i was thinking about that too, but the sealing of the edges and the actual pour is just one hour apart.. did it to lessen the bubbles coming out from the wood after i pour..
@@tablaprimerastudio6752 I have seen too many done the way you did it but only to separate at a later time. Believe me don't seal your edges with your future projects. Allow your resin to be absorb and create a mechanical bond with the wood. The process of bubbles appearing is the air being displace by the resin absorbing into the wood. You can always tap your slab to help dislodge the bubbles to float to the surface then burn it of with a torch.
I'll keep that in mind sir on the next build. Thanks for the tip👍
Magkano po magpawaga ng dinning table akin na kahoy?puede po makuha cp no nyo
Boss pwede po pahingi ng cp number nyo? Or fb?
saan po nabibili yung pangkulay sir yong mga powder na inihalo nyu po
Naks show of tools... 👏👌
saan po nabibili yung pangkulay sir yong mga powder na inihalo nyu po