How to install oil catch can in your car : Τοποθέτηση δοχείο αναθυμιασεων.
Вставка
- Опубліковано 5 вер 2024
- Δείτε και εδώ / see these too.
• How to install new rea...
• How to Change Rear bra...
• Video
• Video
Τοποθέτηση δοχείου αναθυμιασεων.
The installation was done in Citroën vts 1.6 cc 16ν NFU engine.
Η εγκατάσταση έγινε σε Citroën saxo vts 1.6 cc 16ν NFU κινητήρας.
I want your support my friends, subscribe to my channel thank you very much.
Κάντε εγγραφή στο καναλι μου αφήστε το σχόλιο σας κάντε like ,Ευχαριστώ .
Johnnyscarbon@yahoo.com
#catchcan #howtomake
#citroen #catchcan
#johnnyscarbon
#nfu
#nfx
#tu5jp4
#tu5jp4s
#tu5j4
#howto
#howtoinstall
#howinstall
please like the video and subscribe so you help me make new videos thanks
Wrong installation
I'm gonna do mine similar to this way. I only have one tube going from the crankcase to the turbo inlet pipe and a thin line that connects to the airbox.
Catchcan and filter set up like yours with the PVC tube connected. And a small filter on the small air line. Very simple engine, mine.
This will not work because there is no vacuum connected to OUT side, which is supposed to connect via a hose to the air intake. This unit is not designed to be connected to a breather filter as we saw this person do. This unit is meant to replace the hose link between the PCV and the air intake. The IN side of the canister goes to the PVC plug (to vent crankcase fumes), and the OUT side goes to air intake which provides vacuum that sucks or pulls the crankcase fumes out of the engine, through the canister, and into the engine via the air intake. What this person did was do away this the vacuum the engine needs for the PCV to do its job, which will quickly leads to buildup of sludge in the engine.
And so he does his job very well. Collects all engine debris in the container
Crank case vent, Positive crank Vent, hence positive pressure….
I thought the filter goes on top, this seems odd cause that's the outlet where the second horse connects to the intake manifold. The inlet hose connects to the PVC Valve and the outlet hose is supposed to connect to the intake manifold. You installed your oil catch can incorrectly.
Welcome
And the upper point and where I have placed the filter is an output.
I show it clearly in the video.
@@johnnyscarbon The outlet is not for the filter, it's for the intake manifold but whateva do you.
I agree, most likely will cause a vacuum leak.
You are supposed to connect the PCV outlet to the oil catch can inlet and then the other hose from the outlet of the catch can to the intake manifold.
what you have done will get no oil in the catch can since the "Y" type connector you have directly sends oil to the intake with extra Vacuum leak.
Now I know. I just bought one. Thanks and very neat job !
Thank you very much
Johnny το σωληνάκι δίπλα από εισαγωγή στην πεταλούδα, που το έχεις ταπωμένο με βίδα, μπορείς να το συνδέσεις με το άλλο μικρό στο Τ που και εκεί έχεις βάλει βίδα. Θα βοηθήσει με τις αναθυμιάσεις.
Γειά σου Johnny όχι δεν θα βοηθήσει στην εκτόνωση .
Αλλιώς τα στέλνεις στην εισαγωγή το αποτέλεσμα είναι να τα κάνει χάλια .
Perfect tuning
Good job 😊😊😊
Do you guys just plug the stock lines that go into the block?
i dont understand why in out you put the filtre but not at top of it 🤔
🤔🤔🤔
You may put the filter at the top of recipent, and "in" and "out" are for pcv and admisión manifold
for this particular engine it does the job very well.
R u sure u installed it correctly ? In from pcv, out to intake.
hello, for the good of your engine, the residues should be stored in the container and not in the intake.
Yes it was hooked up wrong. Filter on top, in and out valves on the sides
You rigth
And so he does his job very well. Collects all engine debris in the container.
What is the benefit of it?
this container collects engine residues
Is it preventing the crackling of the Advans engine? Appeared by the poor fuel
Να ενα χρήσιμο βίντεο για να κάνουμε τέλεια δουλειά
Where can i found an oil catch can for my bmw 118i in South Africa thanks
Welcome to my channel
in a store with upgrade items. or on a website. 😊😉
👍👍έτσι δυνατά
κάνε λαικ στο βίντεο και εγγραφή έτσι με βοηθάτε να κάνω νέα βίντεο ευχαριστώ
Γιάννη , μια χαρά είναι η εγκατάστασή σου, κάνε κανα βίντεο με το Saxo ειδικά αν είναι το VTS! Μην ακούς τους κακοπροαίρετους. Αν θες περισσότερους συνδρομητές, δες τα βίντεο του Chrisfix και του Rainman's Ray Repairs , και θα πάρεις πολλές ιδέες. Αυτό το αμαξάκι είναι αστέρι ειδικά αν ξέρεις να το χειρίζεσαι , προφανώς για να το χεις μέχρι σήμερα :D
Ευχαριστώ πολύ φιλαράκι 😁
Nice work
I think something wrong for instalion
Welcome
tell me so we can find out
R u serious 😮
Ep bro
Γιάννη Με συγχωρείς αλλά λάθος τοποθέτηση κάνεις
Γειά σου πες μου τι λάθος υπάρχει
¿?
Wrong installation
🤔🤔🤔🤔
your stubbed
Thank you
Bad install
I respect your position
Why it is bad exactly?
@@Mprikiman
The catch can need vacuum to work correctly. In the video has canceled vacum. PCV System needs always vacuum to work fine... here no vacuum.
...
Sorry fo my bad english