Installing Arrow Titanium Exhaust on a 2020 Ducati Panigale V4 S
Вставка
- Опубліковано 8 вер 2024
- Today is Spencer's special day! He gets the ALL-NEW Arrow Titanium exhaust system installed on his 2020 Ducati Panigale V4 S. This thing sounds AMAZING!!!
Looking to add the Arrow system to your 2018-2020 Panigale V4? Check out Moto Wheels for all of your Ducati Parts needs: motowheels.com...
🛑 Don't forget to subscribe: ua-cam.com/users/c...
🔔 Ring the bell for notification!
👍 Please like our video - this helps us out a TON! Thank you! 🙏
👉 Check out our equipment, gear and other cool stuff in our videos: kit.co/CaliMotoTV
Cali Moto TV, the moto channel that has it all. As long as it’s got an engine and wheels, we’ll drive, we’ll ride it, we will tinker on it and we will be sure to share our experiences with you. Regardless if you’re a two or four wheel fan, diesel or gasoline enthusiast, we got you covered.
Hungry for more? Follow us on social media:
/ calimototv
/ calimototv
#ArrowExhaust #DucatiPanigaleV4S #FlameThrower
I think I'm going with arrow! That is the best sounding V-4 i have ever heard. Great job guys.
I found this video VERY!! Helpful.. and just installed my Arrow today.....for my 2020 V4S .. what I found was:
1. After I removed the “easy” side. Completely Instead of trying to bang the “hard” side... I sprayed WD-40 at the connection joint.. went back
To the right hand side of the bike and wiggle it back and forth... and it came right off.
2. I had one extra screw to remove for the chain guard it is also connected to the oem exhaust.. no where to remount it once you put on the arrow....
Just waiting on my brentunning device to arrive... Baffles OUT...✌🏾✊🏾 thanks so much for this video... u save me $1K ( thats what Ducati charge)
Hi Jacob, did you do this step as mentioned in the installation guide? "Loosen the 6 bolts securing rear collectors to the engine", admin.arrow.it/img/documents/3884818.PDF thanks
@@Hugo_WP no need to do this at all. I saw that step... follow the video and ur golden. But again no need to bang the hard side...use the WD-40... shake it back and forth.
@@Jacob_LV awesome! are you riding with or without dbkiluers? is it too loud?
@@Hugo_WP killers OUT!!!!
If u need any help we can setup a FaceTime ... I’m down to help.
Sounds amazing. Just bought myself the 2021 V4S. FYI love your channel
Same here
I have 2016 Daytona 675 with Arrow , it has georgeous sound.. And now i bought 2023 Ducati V4 and I have watched all exhaust videos, again the best is Arrow… I will definitely put titanium Arrows on V4…!👍👍👍
thanks for the video, I'm waiting on my street fighter to arrive. Definitely going that exhaust . Best thing I have ever heard
That system sounds great. I think I'll go with that instead of the Termi.
V4s sounds great after the Arrow install with or without the db. Well put together video Bill 👏
Adam 🇬🇧
@@CaliMotoTV my pleasure buddy 👍🏻
My DB came out as soon as the exhaust arrived 😆
My ducati dealer quoted my 5 hrs to fit the akra slip ons, think i will show them your video! Awesome job
@@CaliMotoTV 10 hours for full system 5 for slip ons
@@andrewprice1189 aight sounds reasonable m8 ducati charges some 150 per hour innit
@@heriport6654 Not when i did it myself in 40 mins!
@@andrewprice1189 40 minutes!?? To install the slip on wow thats wizard level considering the amount of hammering to remove the stock exhaust
Dude love the vids but still waiting for the streetfighter vs tuono drag race make it happen 🙏🏻
You’re a such nice friend. helping out to put that nice exhaust good job
Fitted mine the other day! Sounds great but the L/H silencer is loose and almost touches the rear wheel 😢
Nice. Sounds better than my 911 twin turbo ;)
😅😅😅
About to receive mine, super excited. Watching this video made me realize how not difficult it is granted you have a good tool set (ie: wooden dowel and mallet haha). Random question for exhaust bolts and fasteners during reassembly/install... did you use torque specs or just winged it and torqued to "feel"?
Used this to help remove the stock exhaust on my SFV4. Very helpful. Getting the rear portion all the way out first makes this a very easy and simple task. I also didn't even remove rearsets.
Awesome video man! Makes me want to add a new bike to the collection
The Arrow Exhaust for the V4 is the best sounding system for it I’m sorry but I never liked the sound of Apok
Do you know if u do this yourself if u void warranty? Looking 2 do it myself and save a whole $1k lol
Great video. Lovely bike . Exhaust sounds awesome
How’s it going just purchased a 21 v4s what version is the arrow exhaust is it a 71146pk or the 71145pk
@@CaliMotoTV sir your awesome I appreciate the fast response just subscribed 🙏🤙🏽
Great explanation, guess what, I'll be helping put one of these on using your video.
Nice!
That was some video there friend 👍 I always wondered why other videos never showed how they take the base section of. Just one question, how do u install the new map for the titanium end cans u put on?
great video guys, I would like to ask if with this exhaust, need a program also...? Because in the end you let the engine work until getting warm, but I didn't understand this part.
Have you been able to compare the upmap to a custom tune?
@@CaliMotoTV I think these things are gonna make really big numbers once tuners figure them out. You really put your money where your mouth is. Impressive
Is there room for your heel in a racing boot and does this exhaust eliminate the OEM torque limiting in gears 1-3?
This is subjective but I prefer Arrow exhaust over Akro any day. It just sounds so much aggressive
Nice 🎉thanks , does the up map clear out the servo delete? Did you put something in the plug or leave it be? Thank you sir🎉🎉
Would you recommend an Arrow exhaust for a 959 Panigale ? Just curious if it would sound as good as that one. I know that’s a V4 but I want mine to sound loud too.
Question, the exhaust you have on the street fighter is the stainless steel arrow exhaust and the panigale v4 arrow exhaust is the full titanium?
Does anyone ever do riding videos of the exhaust? It’s all just free revving
Awesome! Thanks folks.
Is all that hammering doing any damage to the stock exhaust? Im wondering if that’s the most efficient and safe way to remove it?
@@CaliMotoTV I’m not a professional mechanic but I’d imagine lubricating it first might help, or perhaps using a butane torch to heat up the areas that need to break loose, or using a come a long to pull it loose. Heck idk, pounding on a beautiful bike like that can’t be good, just saying. I saw what looked like nuts, screws or washers coming off, think of what else could be effected with all that jarring.
Sir Akra vs Arrow which is louder and more meaner love from Indi
Great video - well done. How does the sound compare to the full Akrapovic?
Nice Vid! Can you say when the dyno run will come out with the full tuned bmw s1000r 2022?
Still working on it. Date tbd
Great video.. you made it so simple.. thanks
Thank you for this Video!!!
Great Job Man. From Italy 👍🖐
Nice video with good info but I would have used a 4lb dead blow hammer and not have needed to pound as hard still using the wooden piece.
Choosing between a 2018 Panigale V4 that has the full system Akra exhaust, or a 2020 Panigale V4 with this titanium Arrow slip on exhaust. Can anyone comment on which sounds better? I personally don't like the looks of the Arrow exhaust (looks messy and looks like it's missing fairings to cover it up) but if it sounds better I might lean that way
Hello I have a question: With your Arrow on Panigale v4 is it necessary to disassemble the right side silencer to disassemble the rear wheel or not necessary to disassemble the silencer right side to disassemble the rear wheel ??
thanks and greetings
Not necessary.
Nice job 👍🏼
I have question what do you do with the servo can you out like one of those plugs or what do you have to do am new on those penagalis and I don’t want any cods
Either servo buddy or tune
I'm new to all of this, can i get away with just a servo buddy,or do i need upmap?does the upmap do what a servo buddy does? Thanks Bill, sorry i don't know this stuff like you guys do.
You should run a map or flash the bike.
With the upmap you don't need a servo buddy correct? You can just leave that connector bare?
Omg another arrow exhaust installation
Really nice how to video, thanks for sharing this 👍👍👍😜👌
Hi Bill, great video 👍 did you unplug the lambda sensors after the up map install as I’ve just got an email from up map saying it will give greater gains on performance
Hey Bill, sorry to bring the vid back from the dead. I'm on the market for the 71154pk for the 2021 Panigale V4 base. Not sure how else we can reach, so here is my question. Do the db killers manage to hold the noise emissions to 107 dbs? I love the exhaust but cops are strict here, plus I don't want to annoy my neighbours more. Can't find any decent discussion regarding this online. Thanks for the awesome videos mate
Not sure sorry. Probably not.
@@CaliMotoTV fair enough, thanks for always helping us out with pretty much any enquiry. Safe rides mate 👍
Holy crap man. You may have just talked me out of a SC Project titanium
@@CaliMotoTV looks good and sounds good. Research time for sure.
Hi Bill, do the Catalytic converters come off during this install? The Ducati dealer near me told me that they have stopped doing exhaust work because you got to pull the cats off. Thanks in advance.
Definitely gonna reach out when I need to install an exhaust for a V4! Hah I'm local too which is great 😁
Hello, I’m from Brasil, and I’d like a help for up map, I by a Arrow exhaust and up map but it’s used, it’s possíble transfer the up map for my Panigale V4? Reset the up map? It’s possible?
Hi Calimoto👋🏻 Sweaty worse🥵 Happy smile finally😅🤩👍
That sounds incredible
Is it possible to put stock back on? Being that was so hard to come off? In case you want to go back to Stock
@Cali Moto TV We're these the stock lower fairings? Or did you get the ones that are for clearance with the akra exhaust?
I installed the full Termignoni, sound, I think is just one above the rest, my opinion, I also did the UpMap which I had the same problem as you had on the streetfighter. I see you leave the dongle connected, does it not run your battery flat?
sounds brutal
Hi Bill, I’m just about to buy the arrow exhaust for my SFV4 and I am between the 71146pk that you have and the 71154pk of this video (adding the UPMAP).
Is there any difference about performance between these 2 exhausts ? What would you suggest?
The best content about Streetfighter V4 and bikes you can find in the internet. Congrats man... keep going!!!
@@CaliMotoTV and what about the air filter ? Are you using the original, aren’t yoou?
so the panigale v4 and streetfighter v4 has the same exact exhaust?
Please tell me what did you do to replace the servomotor? you had to use a valve emulator
I just subscribed to your channel. Keep up the great work.
@@CaliMotoTV say hi to Dave for me, that guy is the best suspension tuner out there.but ya man, there are not allot of good Ducati channels out there, I'm glad i found yours brother. Can't wait to see what is coming next.
How many horsepowers does the bike earns after installing the new exhausts?
So did you not need a servo eliminator? Doing mine right now.
Last question, did you have to change the lower fairings?
Not for the arrow. It's oem fit.
@@CaliMotoTV ok cool, one less expense.
@@ashten92 what do you do for living?
Is the same for 2023?@@CaliMotoTV
Pain in the ass aint even the word id use, took me a hour in a half to get my exhaust off of my V4S. Started with a mallet ended with a sledgehammer and crow bar.
😂😂 the joys
@@CaliMotoTV lol you got that right, that thing wasnt going anywhere.
The exhaust sounds amazing. I have a question regarding the lower fairings. Would the Ducati lower fairings for the Akra exhaust look better with this Arrow exhaust? Or would they not fit and just leave the ones that come with the bike. Im asking for a buddy of mine who just bought the V4 SP and is waiting for delivery. When I showed him the Arrow as an option over the Akra he asked about the lower fairings. Ducati does make the black lower fairings for the V4 SP if you get the Akra exhaust. They havent put them on their website yet
Bill, please reach out as I would like to hire you to help install the same exhaust system on my 2020 Panigale V4
@@CaliMotoTV I heard you mention COTA in the video. I am in San Antonio, Texas. Are you available to install this system on a 2020 V4S?
Hey Cali Moto, did you guys notice any affect on engine heat?
No
In the package also included the connector ???
Just bought a 2021 Panigale V4 from A&S in Roseville, where are you located?
I was just there yesterday checking to see if our new bike came in.
This is more loud than the akra exhaust
Good job 👏
So there are two version Stainless/Titanium 71146PK and Full Titanium 71154PK… is there any real difference between them besides 4 lbs and $600 price increase for Full?
One is titanium one is not. That's the main difference.
Ducati fitting is always a pain in ass
Y’all unplugged the 02 sensor?
Do you have arrow full system on streetfighter?
So do the slipons add any hp to the bike, or is it mostly esthetics? I'm torn between a slipon and a full system for my Panigale V4S. If the hp gains aren't that different, then I'll just go with a slipon an air filter and an ecu flash.
Good to know. I'll check that vid out. I'll probably just go with the slipon then. Thanks for the info!
Hello, I have a 21’ v4 with same exhaust/tune that I am about to install. Did you keep the O2 sensors plugged in? Or did you unplug them all together? Which ran better? Thanks!
Unplugged.
Does that Arrow exhaust come with up-map? If not how mutch was it? Thanks Bill. 😊
No, it doesn't. Not sure where you're located so not sure on the pricing. Google is your friend on that one, there's plenty of retailers selling the t800 to tune the bike.
I just purchased a 21 v4s stealth and I wanted to hear which exhaust u would recommend for my sf the full titanium arrow or the stainless steel? Thanks in advance.
@@CaliMotoTV thanks for your help sir.
Bill, or anyone else that has this exhaust. Have y’all heard of ground clearance issues with this system on the track?
@@CaliMotoTV so you tracked the SF? Or was that due to spirited driving?
Have the 2019 v4 with arrow and shit sounds like a motogp bike
Louder than SC project?
Never heard of a bike that tunes itself. Not saying that these don't, but irs still a good idea to get it dyno tuned asap. If it's running lean at all it puts the exhaust valves at risk of getting a hole burnt in them and its missing out on performance whether lean or rich.
At any rate, no auto tuning software or hardware can compare to a skilled tuning on a dyno, and only way to know that it's fuel to air ratio is proper all through the revs is to have it on a dyno hooked up to equipment that reads the barometric pressure and chemical content of the exhaust, is how I believe the fuel air ratio is measured in real, constant time
Are the Catalytic Converters in the original mufflers?
@@CaliMotoTV Thanks!
were and how do i get this upmap
Does the Akrapovic belly panel fit on top of the exhaust?
@@CaliMotoTV thanks buddy, great content, Keep it up!
Hey did you have to install gaskets between the slip on and the manifolds?
@@CaliMotoTV hmm I ordered OEM gaskets to install with my aftermarket slip on as the stock ones come tag welded to the stock mufflers. A friend who did the a slip on install on his 20 V4 installed a slip on and experienced a major leak near the rear o2 sensor, so installing the gaskets helped a bunch and he said it was night and day difference. It helped so much the bike ran well even without a tune. Just wanted to share this info for reference. Nice job guys! Cheers!
@@CaliMotoTV cool even better if it didn’t happen to you, just wanted to share my experience that’s all :)
Arrow exhaust or nothing. Got arrow on 939 motard and mt-10. Best thing since sliced bread 😁
I was literally just on the fence about getting the Akra. Dealer is being weird about the warranty. But BRUHHHHHH. Arrow sounds better than the AKRA even with the baffles in. Might just have to say fuck it. Way to make this decision even harder for me lol
@@CaliMotoTV facts. it’s done. titanium slip on loading 😈
Do you need a servo buddy for this exhaust using a up map t800 ?
@@CaliMotoTV thx. I got the up map t800. Just waiting on the Arrow to come in. Some time next week.
Sorry to bother you. The only real tunes I’ve seen for Ducati is either UpMap or Brent Tune. Is there another option? What made you decide on the UpMap over the Brent Tune ?
what up map did you use
What do u do for a living
Bruh I just cant wait to buy mines its gonna be loud no exhaust
😂😂😂
Sick!
I want one so bad dude
Car or bike, I f**king hate header and exhaust jobs on cars on bikes. I have large hands and always walkaway with sore knuckles and fingers.
crazy…really….
Ducati dealers are charging 9 hours work for the full aklopovick system 5 for the slip on..you just did it in less than 2...good video....good job..but still think the aklapovic sound better..like more professional..don't knw if you understand.
Hi bro. Just to know if I need to up map after the installation of version 2 exhaust and before the cold start. ??? Or I need to start the bike then up map?