Jazzy Elite HD double motor replacement Part 2

Поділитися
Вставка
  • Опубліковано 30 січ 2025

КОМЕНТАРІ • 10

  • @DellaClever
    @DellaClever Рік тому

    Thank you so much!! ❤ This video showed me exactly what I need to know to do a emergency repair on my own chair.

  • @doylerabjohn3435
    @doylerabjohn3435 3 роки тому

    My wife had one given to us. She needs it..... The seat needs replaced. You gave me a lot of good advice. Thanks

  • @randallappleby1563
    @randallappleby1563 11 місяців тому

    Was wondering how I can determine if I need new motors or just brushes?

  • @Everything-dr1wb
    @Everything-dr1wb 2 роки тому

    You are good 😊👍thank you for sharing

  • @chey7827
    @chey7827 2 роки тому

    Thank you so very much!

  • @contreeman
    @contreeman 6 років тому

    thanks brother your a life saver GOD BLESS

  • @W4BIN
    @W4BIN 10 місяців тому

    The slot in the shaft and in the hub of the wheel are "key ways" the thing that fits in them is called a key. (a square key) Ron W4BIN

  • @habazbooz69
    @habazbooz69 4 роки тому +2

    you should just connect the new motors to the chair at first before all this hard work to be sure 100% the old one is the problem.

    • @jetenginethrust863
      @jetenginethrust863 3 роки тому +2

      IMHO he should have checked the old motors after they're disconnected from the power module by applying 24V DC. If they don't spin with 24V DC power applied check for bad motor brushes, bad commutator, bad bearings or bad gears. Easy fixes except for the gears, or just buy a pair of good used motors & gearbox's on Ebay for approx $150.00 to help save the customer money. I'm pretty sure the customer would rather pay a few hundred bucks VS paying for new motor gearbox's at the retail price as of OCT 30th, 2021 for $545.80 each X two + taxes and his labor rate per hour. My apologies to him if he did and the customer wanted new motor gearbox's anyway.

  • @rogertyler3237
    @rogertyler3237 5 років тому

    I have a remedy for that just hold the motor upside down so the the pin with the hole will stay hanging down then put the freewheel lever on