what a happy little engine id LOVE to give that girl a good drive and hear the scream all the way to that hundred hourses! man these cars are the greatest, it doesnt matter to be fast, what matters is the memories you make with them
This type of swift was my first car, and my first ever love. I had a 2002 model, and now I own a 2012 Suzuki swift. But I can help but to think back about my 2002 model with great joy, even stock just a fun little reliable car that doesn't shy away from hard work. I had it all stock, and always wondered what you could do with it. So seeing this is great, I love swifts and if I ever have a ton of money to spare I will get another 2002 swift and make sure it doesn't disappear from the streets.
Pretty nice torque from 1.3L engine, I wonder how much gains there are from raising the compression ratio if possible. Being naturally aspirated and tuned 8 valve engine in such lightweight car is pretty fun
Hi! Thanks! I don’t think raising just the compression ratio gives you a lot of power. Because the same amount of air travels through your engine. Sure it gives you a little, if your engine is a bit worn..
@@domi.markushigher compression will allow bigger cams with more lift and duration and thus allow you to rev higher. All high revving powerful NA engines have high compression.
@@EstrogenGhoul yes I know, I made a high compression too because of 280/280 higher lift cams. But this question was related to rasing just the compression
Depends on engine, if theres like 8:1 stock ratio and u raise it a lot and tune u should gain noticable power with just that, ofc if stock compression is high then small change won't be a lot. Have seen someone do that from around 8 to 11 in old motorcycle and gained couple % of power (mesured on dyno) not remember exact hp numbers
These cars are absolutely amazing. They are pretty cheap to buy, run, and give you loads of fun! Soon they will be turning heads also, cause they will be quite rare in non rusted out states
Also pretty dangerous to run them with today's land whale SUVs. Just something to keep in mind, but there's little in the way of frontal or side protection. Some do have airbags, but other than that you have no modern safety features and the lightweight means your vehicle will be the one sustaining most of the damage. For a track car these would be fun still, but they are only slightly better than a kei car. Finding one without rust will also be a huge challenge. In our family we've had two of these with almost 600k miles traveled. Amazing little machines - 60hp doesn't go far fast, but it does do it reliably.
Thanks! Yes, I was curious, how much can achieved with an 8 valve configuration, but with a well balanced power and tourqe curve. As you can see, it is not an all out racing engine, so you can use it as a daily car easily. (But more ideas - with hopefully more power - are coming soon).
what a nice build. good craftsmanship too. everything looks put together with much care and know-how. thanks for sharing. really enjoyed the view of the engine bay. so clean.
Azta egy ilyen volt tinikorom álma :D Nagyon rendben van a gép, és külön tetszett, hogy nem bemondásra van a teljesítmény, hanem kiraktad a mérési eredményeket is! Amúgy én nagyon csípem a 8 szelepes motorok nyomatékgörbéit, a tiedét nézegettem, és lenyűgöz, marha jó lehet vele menni!
Nice build i like how the car looks inside and out especially the exterior looks decent one thing i was wondering why didn't you switch to a G13BB 16 VALVE head im sure you can get more power out of this setup with that head if you do some porting work on it none other then less car sounds great aswell keep it up man
Hi! Thank you! I stayed with the 8 valve config led by curiosity. Yes, the 16 valve would make much more power, because a lot more air flows through the head. For the next engine I’d like to build a 16 valve sohc, hopefully reach 130hp.
Aztarohadt, burtálisan szép lett és a hangja is nagyon jó lett. Lehetne a jövőben egy videó arról, hogy mit kapott eddig a kocsi és hogy még mi vár rá vagy mik a tervek vele ezek után (csak egy ötlet).
Koszi szepen! Jo otlet, gondolkozom rajta, bar nem tudom mennyire erdekelne az embereket, ha beszelnek, ahelyett, hogy a megvalositott otleteket mutatnam be.
I have a 95 sedan, same 1.3 8v G13A.. its a fun car to drive even stock, but i wanna build a setup like yours some day! Please make a detailed video on how you made that engine push 100+ horses. Love from Pakistan.
Làtom megkapta a gti szívósort,injketor hidat,hengenkénti injektort,gondolom nagynyomású ac is került bele meg nyilvàn a program.Motorba is bele kellett nyúlni?(1000res vàltó,könnyített lendkerék,dugattyúk stb...) ? Szép hangja van!
Szia! Koszi szepen! Reszletesen leirtam mindent a video leirasaban, ha erdekel 🙂 hengerfej, fotengely, dugattyuk mind masok. Sajnos ez egy Baleno szivosora, a pumpa mar jo ideje 3.5 baron megy, es a gyarija
Szia! Nagyon szép lett az autó! Azt szeretném megkérdezni, hogy milyen méretű, típusú felnik vannak rajt? Én is most próbalok összerakni romokból egy swiftet az utókornak... Jó egészseget az autóhoz! Gyönyórűséges!
@ no, it is a straight swap, just need to swap your camshafts, but. I just realized, if you have a carburated engine, it has a fuel pump attached to the engine head and it has a lobe on the camshaft to move the pump. So it is a no go because of the fuel pump (and I think the carburated distributor is different too compared to the injection version)
A justy would be slower for sure due to a lot more drivetrain loss. With 108 hp you don't have any problem with traction, so fwd is "better" for this case.
@@domi.markus Az is szép! Persze nem kell száguldozni csak az autópályán mégis muszáj menni mert különben elvisz az áramlat 🤔😅 Sok balesetmentes km-t és vigyázz rá!!! 🤗
@@domi.markus köszi az infót ! :) Épitek egy 1.3 8v 97-es suzuki swiftet .. elég vegyes mármint mindig azt csinálok rajta ami így hírtelen jön :D Egy dolgot próbálok megoldani már a kezdetek óta de nem jövök rá hogy kellene / lehetne .. kulcsal durrog ahogy az összes .. mindig egyet ami nagyon hangos de en valami folyamatos durrogást szeretnék el érni mint egy rajt progi vagy hasonló .. Csak vezérlővel lehet megoldani ? Valami buta - egyszerű megoldás nincs erre ilyen HomeMade ? :)
@@AttilaRichardSlett ha jol tudom, csak vezerlovel lehet elerni, nekem maximum meg ugy durrogott kicsiket regen, meg a vezerlo nelkul, hogy a gazzal jatszottam motorfeknel. De egy masik vezerlo tudja durrogtatni, levagja motorfeknel az elogyujtast amennyire lehet, kesobb gyujt, ezert durrog.
probably the coolest, most fun 108hp ive seen
Ejj b+, ez nagyon szépen szól :) Végre valaki nem csak a kínai gt27 eket aggatja. Turbóst mindenki tud építeni, még a hülyék is :D
Főleg H kínai 28😂
Hát én igaz nem nézem sose semmibe a swifteket de ez gyhaa ez nagyon fasza lett 😮
Proof that you can make anything fun and cool if you know what you're doing.
I like how massive that throttle body is for such a small car! Super cool
Now this I like! It's so different, and still very high quality nice build. And it sounds amazing! 😊
what a happy little engine id LOVE to give that girl a good drive and hear the scream all the way to that hundred hourses! man these cars are the greatest, it doesnt matter to be fast, what matters is the memories you make with them
I was expecting this from a GTI, but out of a wheezy 8V? Well done!
This type of swift was my first car, and my first ever love. I had a 2002 model, and now I own a 2012 Suzuki swift. But I can help but to think back about my 2002 model with great joy, even stock just a fun little reliable car that doesn't shy away from hard work. I had it all stock, and always wondered what you could do with it. So seeing this is great, I love swifts and if I ever have a ton of money to spare I will get another 2002 swift and make sure it doesn't disappear from the streets.
Jól megy! De ismerős helyszín, ez a 85-ön van Kóny mellett. 😀
Pretty nice torque from 1.3L engine, I wonder how much gains there are from raising the compression ratio if possible. Being naturally aspirated and tuned 8 valve engine in such lightweight car is pretty fun
Hi! Thanks! I don’t think raising just the compression ratio gives you a lot of power. Because the same amount of air travels through your engine. Sure it gives you a little, if your engine is a bit worn..
@@domi.markushigher compression will allow bigger cams with more lift and duration and thus allow you to rev higher. All high revving powerful NA engines have high compression.
@@EstrogenGhoul yes I know, I made a high compression too because of 280/280 higher lift cams. But this question was related to rasing just the compression
Depends on engine, if theres like 8:1 stock ratio and u raise it a lot and tune u should gain noticable power with just that, ofc if stock compression is high then small change won't be a lot.
Have seen someone do that from around 8 to 11 in old motorcycle and gained couple % of power (mesured on dyno) not remember exact hp numbers
What turbo did you use ?
K.rva jó lett, hatalmas pacsi!😀👍
Wow, I never thought I would like a suzuki swift this much. What an awesome build!
Szeretem! Szívó,szép a görbe,le is van mérve és nem be érezve ahogy másoknàl és végre nem egy billegős tucat pd füsttel🙏!
These cars are absolutely amazing. They are pretty cheap to buy, run, and give you loads of fun! Soon they will be turning heads also, cause they will be quite rare in non rusted out states
Also pretty dangerous to run them with today's land whale SUVs. Just something to keep in mind, but there's little in the way of frontal or side protection. Some do have airbags, but other than that you have no modern safety features and the lightweight means your vehicle will be the one sustaining most of the damage. For a track car these would be fun still, but they are only slightly better than a kei car. Finding one without rust will also be a huge challenge. In our family we've had two of these with almost 600k miles traveled. Amazing little machines - 60hp doesn't go far fast, but it does do it reliably.
It is amazing, I figured it was going to be turbocharged, but all motor is nuts!
I am curious why you stuck with the 8 valve head, for the challenge?
Thanks! Yes, I was curious, how much can achieved with an 8 valve configuration, but with a well balanced power and tourqe curve. As you can see, it is not an all out racing engine, so you can use it as a daily car easily. (But more ideas - with hopefully more power - are coming soon).
@@domi.markus Awesome!
This was my dad's first car he buyed we have lots of memmories of it. Was such a fun car to be in
Such a nice build! The dyno graphs are insane !! Gti power with more torque, and peak tq from 2500 to 6000 is wild !! Great job !!
Thank you very much! I aimed for a balanced curve! Hope it will get better soon. Cheers
I know that car, but this has to be the coolest version of it that I've seen. :)
Nice ride!
Igazán szép, letisztult építés. Nagyon tetszik hogy a 8V motorból hoztad ki ezt a teljesítményt.
Szép munka!
Koszi szepen!
Nightride sticker! Greetings from Poland man
thats a seriously cool car so clean too
you got my like for NIGHTRIDE sticker, love from Poland! Hungarian brother!
🙏🏻 Polak, Wegier, dwa bratanki
Love the car Looks awesome en sounds great
Ennek a Szuzinak küldök egy puszit ❤ Komolyan bejön, rohadt jó lett!
Nagyon komoly igazi sleeper! Gratulálok!
Cleanest build I've seen in a while. Sick!
Sounds pretty nice for a 1.3 8v intake and exhaust
Nagyon király kis "szappanos doboz", sok sok balesetmentes kilómétert vele :)
Méghogy a szívómotort nem lehet tuningolni....
Igaz, hogy gazdasági csőd, na de akkor is!
Nagyon jó lett! Gratulálok!
it remainds me my justy before the swap, kinda nostalgic
what a nice build. good craftsmanship too. everything looks put together with much care and know-how. thanks for sharing. really enjoyed the view of the engine bay. so clean.
Ah teso iszonyat jó lett!:D az egyik álomom ott van a kezedben egy jó Kis szolidan tuningolt swift!:D ah tökéletes!:)
This, I love.
Really nice video! I love it!! RESPEKT!!!
Simple and beautiful
That thing is lovely.
Azta egy ilyen volt tinikorom álma :D Nagyon rendben van a gép, és külön tetszett, hogy nem bemondásra van a teljesítmény, hanem kiraktad a mérési eredményeket is! Amúgy én nagyon csípem a 8 szelepes motorok nyomatékgörbéit, a tiedét nézegettem, és lenyűgöz, marha jó lehet vele menni!
Nagyon koszi! Orulok, hogy tetszett! :)
Congratz man,what a lovely pocket rocket car eventhou without g13b 16v inside ,👍💪🏼
This is clean tunner well done ❤
Very nice project.
Nagyon büntet eszméletlenül duruzsol. Pacsi.
Marha jol nez ki, es nagyon durva elmeny lehet vele jarni, grat hozza, szep munka🤌🏽💪🏽❤️
Szép autó srácok, minden elismerésem!😄
Please make some more videos this is a awesome build!!!
I will, when I have enough content for it :) thanks btw
Gyerekkori álmom egy ilyen 😍
Nice build i like how the car looks inside and out especially the exterior looks decent one thing i was wondering why didn't you switch to a G13BB 16 VALVE head im sure you can get more power out of this setup with that head if you do some porting work on it none other then less car sounds great aswell keep it up man
Hi! Thank you! I stayed with the 8 valve config led by curiosity. Yes, the 16 valve would make much more power, because a lot more air flows through the head. For the next engine I’d like to build a 16 valve sohc, hopefully reach 130hp.
@@domi.markus nice looking forward to a 16 VALVE build future videos keep it up would love to see what kinda power it can make good luck 🤞
Szép/nagyon jó hangú gép💪🔥
what a beast
Aztarohadt, burtálisan szép lett és a hangja is nagyon jó lett. Lehetne a jövőben egy videó arról, hogy mit kapott eddig a kocsi és hogy még mi vár rá vagy mik a tervek vele ezek után (csak egy ötlet).
Koszi szepen! Jo otlet, gondolkozom rajta, bar nem tudom mennyire erdekelne az embereket, ha beszelnek, ahelyett, hogy a megvalositott otleteket mutatnam be.
that sounds amazing
Esa Suzuki esta linda Dios te la bendiga
One cool little car that and soaunds awesome 👌
wow thats super nice
Very nice sleeper
Awesome car!!! So cool. I love it.
Even better then before !! For me best looking Swift , clean lines , everithing is made with lot of taste , the color is ideal .
Nagyon Brutális Gratulálok
Hogy harap, nagyon fajin!
Pure fun!! Love builds like this, and the sound is just awesome!
That is some nice car man, I have a swift aswell, wanting to up the power some day, great vid!
Gyerekek ez hogy szól már :D kurva jó!
Nice build. 👏
This is so cool ❤
Jézus, bitang egy gép😍😍
Nice
nice build
I have a 95 sedan, same 1.3 8v G13A.. its a fun car to drive even stock, but i wanna build a setup like yours some day! Please make a detailed video on how you made that engine push 100+ horses. Love from Pakistan.
@@muhammadtaqveemahsanpasha4045 thanks! I’m planning to do an update video, it is 111hp now.
@@domi.markus looking forward to it!
de vagány! nincs tul tolva nekem ez nagyon bejön :D
sick car man
Yes yes yes 😮👍👍👍👍 saludos chile
Fasza kis gép lett! :D
Làtom megkapta a gti szívósort,injketor hidat,hengenkénti injektort,gondolom nagynyomású ac is került bele meg nyilvàn a program.Motorba is bele kellett nyúlni?(1000res vàltó,könnyített lendkerék,dugattyúk stb...) ? Szép hangja van!
Szia! Koszi szepen! Reszletesen leirtam mindent a video leirasaban, ha erdekel 🙂 hengerfej, fotengely, dugattyuk mind masok. Sajnos ez egy Baleno szivosora, a pumpa mar jo ideje 3.5 baron megy, es a gyarija
@@domi.markus jaa, azt nem is néztem sorry :) De akkor elolvasom.Én nem sokà egy 1.3 16v t szeretnék majd kicsit elmérgesíteni 🤣
Lovely car 👍
how can't u fall in love in this car in 1sec?
Kibaszott jó gép!
Itt is le a kalappal, fasza lett!
Szia! Nagyon szép lett az autó! Azt szeretném megkérdezni, hogy milyen méretű, típusú felnik vannak rajt? Én is most próbalok összerakni romokból egy swiftet az utókornak...
Jó egészseget az autóhoz! Gyönyórűséges!
Szia! Köszönöm szépen! 14-es GTi lemezek, elől 25, hátul 40mm lett beléjük toldva, és gunmetal színre lefújva. Gumik 185/55.
Köszönöm szépen!
one of my first cars, kept me spinning during rain for ages 🤣 easily hit 8500 rpm
So Cooollll AF
Cool car !!! you should had a resonator to the exhaust line!!!
this is why N/A is the best
Eso ta nuevo y lindo ❤😍
Nagyon pacek! 🫠
Program van rajta vagy talán maxxecu? Lehet tudni egy konfigot ? 😀😀
Szia! Koszonom szepen! Mindent leirtam a video leirasaban ✌️
Ezzel pikk pakk kint van a pizza a címen és meg telefonálni se kell ha megérkezel.😅
Paraszt nagyon ;)
Nice car... ❤ from indonesia
💙 Suzy Blue
Pfhuuu de kakas😍
crazy build, suspension setup?
o kurwa, ale zajebista fura! xD
absolutely awesome. Recently got myself a same carby G13BA. what would u recommend as some good first mods to start pushing more power out of it?
Probably a bigger carb, or vitara engine head with bigger camshafts would be a good starting point, with a good exhaust.
@domi.markus what would putting the viatra head include? Does it need machining to make them fit?
@ no, it is a straight swap, just need to swap your camshafts, but. I just realized, if you have a carburated engine, it has a fuel pump attached to the engine head and it has a lobe on the camshaft to move the pump. So it is a no go because of the fuel pump (and I think the carburated distributor is different too compared to the injection version)
Négy év után ismét itt a gépállat
Szia, megkérdezhetném hogy honnan van a koptató a kocsidról? Egyébként gyönyörű szép az autód és brutál hangja van!😎
Szia! Köszönöm szépen! Renault Espaceről van
amazing
I wonder how it would compare to Justy with its 4x4
A justy would be slower for sure due to a lot more drivetrain loss. With 108 hp you don't have any problem with traction, so fwd is "better" for this case.
Where can I find the front bumper and sill attachment? Do you have the dimensions? Bumper and sill lip
Increíble
Szia. Megkérdezhetném hogy higy van össze rakva az auto hogy a kis 1.3bol 108lovat ki tudtál hozni?
Szia! Mindent reszletesen leirtam a video leirasaban, ott eltudod a modositasokat olvasni 😄
@@domi.markus köszi szépen.
Akarok egy ilyet én is építeni 😍😍
Sose rajongtam ezekért a Swiftekért, de ez nagyon állatúl néz ki és a hangja is szép :D
Mi a max sebesség vagy nem voltál még NOLIMIT autópályán vele?
Köszönöm szépen! Rövidebb, 1.0-es váltó van alatta, így csupán 190-195 a max, amivel mentem vele eddig.
@@domi.markus Az is szép! Persze nem kell száguldozni csak az autópályán mégis muszáj menni mert különben elvisz az áramlat 🤔😅 Sok balesetmentes km-t és vigyázz rá!!! 🤗
Helloka . Imádom a gépet !! Gratulálok !! Érdekelne hohy milyen vezérlővel megy ha nem titok ? ! 😊
Szia! Köszönöm szépen! Megasquirt MS2 V3 van benne, minden részlet a leírásban :)
@@domi.markus köszi az infót ! :) Épitek egy 1.3 8v 97-es suzuki swiftet .. elég vegyes mármint mindig azt csinálok rajta ami így hírtelen jön :D Egy dolgot próbálok megoldani már a kezdetek óta de nem jövök rá hogy kellene / lehetne .. kulcsal durrog ahogy az összes .. mindig egyet ami nagyon hangos de en valami folyamatos durrogást szeretnék el érni mint egy rajt progi vagy hasonló .. Csak vezérlővel lehet megoldani ? Valami buta - egyszerű megoldás nincs erre ilyen HomeMade ? :)
@@AttilaRichardSlett ha jol tudom, csak vezerlovel lehet elerni, nekem maximum meg ugy durrogott kicsiket regen, meg a vezerlo nelkul, hogy a gazzal jatszottam motorfeknel. De egy masik vezerlo tudja durrogtatni, levagja motorfeknel az elogyujtast amennyire lehet, kesobb gyujt, ezert durrog.