Chur my bro, yeah when I bought the turbo and shit I didn’t realise, having it the way same as yours would of made zero room for rad haha, so had to make do lol
@@TomMcnatty you'd think there was no room but it does just squeeze in there, on the p10 the front engine mounts the problem but the p11 crossmember and front eng mount solves the problem mint. I had to clock the turbo a bit to clear the rad but then another bit hit the block so I ground it down, it did take a few goes to get the sweet spot and it's tight as a nuns snatch on there but she's all g👌.
@@normanfagon3895 I definately know that boost performance does. I’m not too sure about the other shops though. You’d have to go on the website and have a look. :)
Yeah mean bro you ever get it done ? They are sooooo rapid with a t28 or gtx2867 or g25 . DO NOT get anything laggy , i put my life on it that you’ll love a responsive setup over a laggy one. Just a little heads up man coz it’s a HUGEEEEEEE difference in car
@@internalcombustion8744 I'm building 1 atm gonna attempt to run it on just a det ecu an injectors t25 wee fronty walbro pump I'll prob throw a fuel reg in too 5-7psi I just want some zutututu haha
@@iloverice6600 will go okay but highly reccomend gojng for a t28bb or a t28 from a gtir they the biggest ones. Also make sure you get a aftermarket Ecu and a good tune (most important part) , MAXX street Ecu is 100% best bang for buck . Where you located in nz ? Also don’t bother without A tune bro just scrap the idea if you weren’t planning on tunnjng it
@@internalcombustion8744 I'm in chch bro I know a tune is the go but I dont got the coin to do that yet but have all the turbo gear already an bulk spare de motors so ima do it and find out the hard way 😅 but yeah once some coin allows I'll get 1 tuned eventually I just wanna clear this stack of spare sr motors lol either that or sell them all an buy a w10 det
![[ASMR] Neglected Nissan Primera Detail and Quick Flip - Restoration Series 01](http://i.ytimg.com/vi/fKVGODgll5Q/mqdefault.jpg)
Awesome build I want to do the same build with my.1996 p11.Where are you in NZ
Sure your finished by now but thats a rwd manifold on your fwd engine. if you change that out your life would be much easier
That’s Dope My Bro 💯🇳🇿🤙
Cheers my bro 💯🤙🏼
Nice man I just bought a sr20det wagon to build myself
Awesome my bro, good luck with your build 🤙🏼💯
Churbro, I have a p10 I did a Det swap from a got aviner, my turbo was facing the other way like the intake points towards the battery box.
Chur my bro, yeah when I bought the turbo and shit I didn’t realise, having it the way same as yours would of made zero room for rad haha, so had to make do lol
@@TomMcnatty you'd think there was no room but it does just squeeze in there, on the p10 the front engine mounts the problem but the p11 crossmember and front eng mount solves the problem mint. I had to clock the turbo a bit to clear the rad but then another bit hit the block so I ground it down, it did take a few goes to get the sweet spot and it's tight as a nuns snatch on there but she's all g👌.
Hey which country are you in ?
Were do uh get your parts?
Hey I’m im from New Zealand! We have a couple online performance shop here in NZ. Otherwise get my stuff from overseas. Usually America!
Cheers Man 💯
@@TomMcnatty they ship to Jamaica?
@@normanfagon3895 I definately know that boost performance does. I’m not too sure about the other shops though. You’d have to go on the website and have a look. :)
Mean bro I'm going to be doing the same build brother but a ve+t
Cool awesome bro. What have you done so far
@@TomMcnatty not alot yet man just got the motor need to get a loom and ecu sorted then can start to put the motor in the hole
Nissan p11
Continue bro i need your help because im doing the same build in trinidad 🇹🇹
Awesome bro!! Keep it up 💯
Yeah mean bro you ever get it done ? They are sooooo rapid with a t28 or gtx2867 or g25 . DO NOT get anything laggy , i put my life on it that you’ll love a responsive setup over a laggy one. Just a little heads up man coz it’s a HUGEEEEEEE difference in car
If you already are running a t28/gtx2860/g25 then allgood
Wats a t25 go like on a de+t?
@@internalcombustion8744 I'm building 1 atm gonna attempt to run it on just a det ecu an injectors t25 wee fronty walbro pump I'll prob throw a fuel reg in too 5-7psi I just want some zutututu haha
@@iloverice6600 will go okay but highly reccomend gojng for a t28bb or a t28 from a gtir they the biggest ones. Also make sure you get a aftermarket Ecu and a good tune (most important part) , MAXX street Ecu is 100% best bang for buck . Where you located in nz ? Also don’t bother without A tune bro just scrap the idea if you weren’t planning on tunnjng it
@@internalcombustion8744 I'm in chch bro I know a tune is the go but I dont got the coin to do that yet but have all the turbo gear already an bulk spare de motors so ima do it and find out the hard way 😅 but yeah once some coin allows I'll get 1 tuned eventually I just wanna clear this stack of spare sr motors lol either that or sell them all an buy a w10 det