Tub Shower Valve Mistakes and How You Can AVOID Them

Поділитися
Вставка
  • Опубліковано 15 чер 2024
  • This video shares tub shower valve mistakes and how you can avoid them. For more tips and tricks visit homerepairtutor.com
    #howto #diy #bathroomremodel
    Tub Shower Valve Mistakes and How You Can Avoid Them
    0:00 Tub shower valve mistakes
    0:21 How to choose tub shower valve
    1:56 Shower valve depth
    3:55 Tub Shower height
    4:47 Tub shower valve plumbing
    5:43 PEX A for shower valves
    6:18 How to install drop ear for shower head
    7:08 How to secure copper tub spout
    These supplies were used in our video:
    -Delta R10000-PFT-MF (PEX A)
    Some product links may be Amazon affiliate links. As an Amazon Associate, we earn from qualifying purchases at no additional cost to you.
    Want our newest DIY videos? Subscribe to our channel and hit the notification bell to see every upload. We upload new videos every Saturday.
    Disclaimer:
    Videos produced by Home Repair Tutor are provided for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. Home Repair Tutor does not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing DIY projects on their homes they are doing it at their own risk and Home Repair Tutor cannot be held liable if they cause any damage to their homes. Home Repair Tutor cannot claim liability with all applicable laws, rules, codes and regulations for a project.
  • Навчання та стиль

КОМЕНТАРІ • 16

  • @frankj5947
    @frankj5947 4 місяці тому

    Excellent reminders. Great videos!

  • @et4615
    @et4615 4 місяці тому +4

    I'm a decent carpenter/painter but I've been left to finish some remodeling on my own which includes the shower unfortunately. My other half died suddenly two years ago now and I have everything to finish this job right here and I just needed this kick in the rear. He must have known 😅,,thanks for showing up in my feed at the right time.

    • @HomeRepairTutor
      @HomeRepairTutor  4 місяці тому

      Thank you, hopefully this helps simplify the process and reduce any problems for you

    • @et4615
      @et4615 4 місяці тому

      @@HomeRepairTutor Thank you. I'll let you know how it goes. 🙂

  • @jenjabba6210
    @jenjabba6210 4 місяці тому +4

    Seriously excellent video!

    • @HomeRepairTutor
      @HomeRepairTutor  4 місяці тому

      Thank you 🙏🏼 I really appreciate your kindness

  • @JosiahK555
    @JosiahK555 4 місяці тому +2

    I did mine all copper, the rest of the house is copper, i had the tools and only had to buy a couple pieces for my remodel. one thing i do Not like is having the handle too low, the instructions on the fixture say to keep it about a foot from the spout. but i was tired of bending over to turn the water off and on, my valve is probably about 18 inches above the spout. i like the way it looks better and it's easier to use, I also used the higher grade copper specifically for the tub spout connection to the valve since it's likely to receive more abuse.

  • @loramcclamrock5549
    @loramcclamrock5549 4 місяці тому +3

    Thanks so much! What a huge help.

  • @neurodivajewelz
    @neurodivajewelz 3 місяці тому +1

    Awesome vid!

  • @paulwright2335
    @paulwright2335 4 місяці тому +6

    Just installed a shower with an extension arm. It’s a good thing I checked.the drop ear needs to be flush with the tile to install the shower arm for the rain Shower. otherwise the trim piece and arm wouldn’t of worked

    • @HomeRepairTutor
      @HomeRepairTutor  4 місяці тому +1

      Good example of a potential problem down the road! Great job seeing that ahead of time 🔥

  • @robertomarshall4219
    @robertomarshall4219 Місяць тому

    Assembling delta shower valve

  • @spreadcreekjr1731
    @spreadcreekjr1731 2 місяці тому +1

    This was good atuff

  • @jk-ml5fb
    @jk-ml5fb Місяць тому

    Contractors set the valve too deep, now everything is done, including tiles, is there a way to fix it from the back?