Just got this exact setup on my 19 f150 with 2.5” leveling and now wish I would have went 35” tire with bds 4” lift. I love the setup regardless and enjoy the ride.
The reason why it gotten louder is because the tires started to cuff. Proper rotation every 3k miles could prevent that. You can see the cuffing on the front tires.
It’s your truck so you do what you want to it. I personally don’t like the front higher than the rear. I do have to disagree though, if you left the rear blocks on the truck it would be sitting almost perfectly leveled and would be better for towing that trailer. I have a ‘15 XL Fx4 and with 2.5” spacers like you and the rear tire well only sits 1/2” higher than the front when I took a tape measure to it. I like the stance of ur rig. I’m assuming you got those EcoBeast badge stickers off eBay like I did lol. Subtle yet awesome upgrade! Side note, my XL has the crash bars in front and back of the front tires that you cut off yours
Agreed. My 2017 sits perfectly level and the rear blocks are still intact. This guy has a slick truck, but lowkey wanted a squatted truck but didn’t want it to noticeable lol
For that panel some advice for you if you plan on keeping it painted is to scuff it up with some sandpaper and then spray it so the paint has something to stick to. Otherwise you are going to keep having issues with it long term of the paint flaking off like you have right now.
Yeah the shop I had paint it was supposed to do that. Looks like they got lazy unfortunately. I have a buddy where I’m at now who is a great painter and I’m sure will do a better job
Did you have a vid on the install of the platinum tailgate panel? Will be looking for your re-install vid of the panel. I have the FORD Raptor style on my tailgate and the 3M just wasn't enuf. Kept falling off.
Yeah I have a video I’ll be filming in about a month and a half. Basically you need to use the most expensive 3m automotive double sided tape and use clamps for 24 hours to clamp it to your truck. I recommend doing so with the tailgate off of the truck. Subscribe and you’ll see the video soon sorry I would do it now but I’m out in California for work for a few more weeks
Truck looks great, just got my 22s, with 33' tires. What did you use to cut the crash bar that was rubbing? That's some hard steel... That's my problem
Nah I left the bumper on and yeah it took me about an hour to chop them off it sucked. Angle grinder might work better but I didn’t have one so I used a saw saw
The tires in the front looked chewed up. That might be why they are getting louder the more miles you put on them. Running a wide off road tire like this, you have to stay up to date on rotating them.
Looks good buddy, I added a 2" Block in the back in mine with a 2.25" block in the front and it lifted the back just enough to sit it back up perfectly level and maybe a bit higher but not enough to notice and not sagging at all! plus i tow a rzr around all the time so I kind of wanted it a bit higher for when the trailer was on! And as for the rubbing on the inner fender well on back I added a little machine screw to pull in the inner fender tighter to truck because I found mine sat of the truck like 1/2" and now it hardily rubs! This is all on my 18 model too!
Hey I love that truck I have a f150 2016 it look the same as that I’m trying to do the 3inch spacers do I have to lift it? I’m new to this I’m trying to lift it only about 4 inch or maybe 3
Awesome set up! If I wanted to do a similar set up do you think I need a v8 ? My ford has the 2.7 eco boost, and I was told having bigger wheels, and tires could void my warranty because bigger wheels and tires add weight and stress on the truck/ super chargers. Please give me some help with this thanks
Nice truck man, I think this is the best looking year of the f150s. Did you get an alignment after the leveling kit? Kinda looks like the tires up front are wearing faster then they should be, almost looks like when a FWD car hasn’t rotated its tires. But this truck is beautiful, I wouldn’t change a thing.
The cupping is bad on those tires. I run 33 x12.50r20 on a 2.5 in lift. A 2017 f150 for that matter. I rotate the tires every 3000 miles to help with that
Bro nice truck man! I don’t see why so many people on here hating! Yal need to show love or slide. He said everything yal talk about in the video. They trying to find all the things to say that is negative. Dope truck and good video bro! This helped me out a lot and I’m bout to get the same set up.💯💯
Bought an oem platinum grill off of eBay, took it to a local body shop and had them paint it gloss black with race red inserts. Race red is the best color I just bought a matching mustang in the same color! Subscribe for more
It will be fine, your upper control arms will hit the spring on big bumps. Most people who do a 3” level put aftermarket control arms. Subscribe for more Gat
Haha thanks, the evo is surely coming along I’ll do a video on it soon. Redline lighting did my headlights. Awesome work for sure check them out on Facebook
@@DoctorRickSanchez bro he's running 22x12 not a 20x12 u can't fit 35 and 22s on just a level I tried! However I am running 20x12 -44 offsett on 35s on a 2.25" level but I don't have the stock front bumper
@@ShaunOconnell lmfao i sure as hell dont go slapping platinum badges on xlts to make something it isnt, your clueless comment just made you that more ridiculous
Haha naw it’s my girlfriend’s brothers. We just put an axle in it, shit needs a clutch bad so probably gonna do that soon. Gotta pump the damn thing up to get it moving
Just got this exact setup on my 19 f150 with 2.5” leveling and now wish I would have went 35” tire with bds 4” lift. I love the setup regardless and enjoy the ride.
The reason why it gotten louder is because the tires started to cuff. Proper rotation every 3k miles could prevent that. You can see the cuffing on the front tires.
You’re 100% right
Cupping
yes, starting to cup
Hey nice truck, would you mind sharing the specs of the tires. Love your fitment and just want to make sure I order the right setup.
Thank you for information! I put 33x12.50R20 and had rub on hard u-turn... Ima cut crash bar. Thx a mil for insight!
👍
It’s your truck so you do what you want to it. I personally don’t like the front higher than the rear. I do have to disagree though, if you left the rear blocks on the truck it would be sitting almost perfectly leveled and would be better for towing that trailer. I have a ‘15 XL Fx4 and with 2.5” spacers like you and the rear tire well only sits 1/2” higher than the front when I took a tape measure to it. I like the stance of ur rig. I’m assuming you got those EcoBeast badge stickers off eBay like I did lol. Subtle yet awesome upgrade! Side note, my XL has the crash bars in front and back of the front tires that you cut off yours
Agreed. My 2017 sits perfectly level and the rear blocks are still intact. This guy has a slick truck, but lowkey wanted a squatted truck but didn’t want it to noticeable lol
For that panel some advice for you if you plan on keeping it painted is to scuff it up with some sandpaper and then spray it so the paint has something to stick to. Otherwise you are going to keep having issues with it long term of the paint flaking off like you have right now.
Yeah the shop I had paint it was supposed to do that. Looks like they got lazy unfortunately. I have a buddy where I’m at now who is a great painter and I’m sure will do a better job
Do you think 20x12s would rub with a 2inch level on 33x12.5?
Did you have a vid on the install of the platinum tailgate panel? Will be looking for your re-install vid of the panel. I have the FORD Raptor style on my tailgate and the 3M just wasn't enuf. Kept falling off.
Yeah I have a video I’ll be filming in about a month and a half. Basically you need to use the most expensive 3m automotive double sided tape and use clamps for 24 hours to clamp it to your truck. I recommend doing so with the tailgate off of the truck. Subscribe and you’ll see the video soon sorry I would do it now but I’m out in California for work for a few more weeks
Awesome.. thanks!!
Coming from a Chevy guy to a Ford. Just got my 2018 F150 Lariat. I'm loving the truck so far. Is that the stock front end, minus the lower valance?
Yes stock front end just some paint on some parts. Subscribe for more and enjoy your truck
@@ShaunOconnell Subscribed !
Truck looks great, just got my 22s, with 33' tires. What did you use to cut the crash bar that was rubbing? That's some hard steel... That's my problem
Just a sawzaw and a few metal blades
@@ShaunOconnell jesus, it's taking forever. Did you end up taking ur bumper off to do it?
Nah I left the bumper on and yeah it took me about an hour to chop them off it sucked. Angle grinder might work better but I didn’t have one so I used a saw saw
Zachary Wissman get you a portable bandsaw. And a 4” grinder, with a cutoff wheel
Thanks I will keep you posted...thank
You subscribe yet?
The tires in the front looked chewed up. That might be why they are getting louder the more miles you put on them. Running a wide off road tire like this, you have to stay up to date on rotating them.
Jon Cappercorn you’re exactly right, I didn’t rotate the tires enough
Jon Cappercorn subscribe for more!
Looks good buddy, I added a 2" Block in the back in mine with a 2.25" block in the front and it lifted the back just enough to sit it back up perfectly level and maybe a bit higher but not enough to notice and not sagging at all! plus i tow a rzr around all the time so I kind of wanted it a bit higher for when the trailer was on! And as for the rubbing on the inner fender well on back I added a little machine screw to pull in the inner fender tighter to truck because I found mine sat of the truck like 1/2" and now it hardily rubs! This is all on my 18 model too!
Thanks man some great advice for everyone
I’m sure you ride looks good man
Hey I love that truck I have a f150 2016 it look the same as that I’m trying to do the 3inch spacers do I have to lift it? I’m new to this I’m trying to lift it only about 4 inch or maybe 3
Depends what size tires you go with. Subscribe for more
Please do a cross tire rotation cause those front tires a cupped pretty badly and if you rotate your tires more often they will last a lot longer
I’m going to rotate them ASAP
How many rock chips have you gotten sense getting these 12 wides on there?
Hardly any
Dude I love your truck. I’m glad you got a new crib. Wish you the best of luck my man. Hope my shit looks as nice as your one day except with Blue 😍
Haha thanks man
Ha, nice F150 and Evo. Got a silver IX myself along with my F150.
Love the truck man. Where did you find your ford badges at ? Been looking for those exact ones for awhile !
They’re custom made from “outlaw LEDs”
@@ShaunOconnell I’ll check them out, thanks !
Does your truck rub because of the offset i want 33s on mine but want them to b offset a little less than yours ?? Would u still have rubbing issues
The offset and the wheel width is why, run a 10” wide and you’ll be fine. Subscribe for more
Where did you get your black and red grille from?
Oem platinum grill that was custom painted. Buy one on eBay and paint it. Subscribe for more
Looks like you could use an alignment there's alot of heel toe wear on your passenger front
Definitely need an alignment. Subscribe for more
Awesome set up! If I wanted to do a similar set up do you think I need a v8 ? My ford has the 2.7 eco boost, and I was told having bigger wheels, and tires could void my warranty because bigger wheels and tires add weight and stress on the truck/ super chargers. Please give me some help with this thanks
HighCarbChris79 you’ll be fine the 2.7 ecoboost is no slouch. Subscribe for more
Dude that truck is sick as hell!!!
Thanks Zach it has come a long way
Nice truck man, I think this is the best looking year of the f150s. Did you get an alignment after the leveling kit? Kinda looks like the tires up front are wearing faster then they should be, almost looks like when a FWD car hasn’t rotated its tires. But this truck is beautiful, I wouldn’t change a thing.
Thanks man I agree and yes I did an alignment I don’t know what’s up with the chopped tires I’m going to rotate them and then get another alignment
The cupping is bad on those tires. I run 33 x12.50r20 on a 2.5 in lift. A 2017 f150 for that matter. I rotate the tires every 3000 miles to help with that
Yeah I’m rotating them ASAP thanks Rival subscribe for more
You think 20x12 -40 offset with same tire size would rub like yours do?
They would rub slightly less than mine do, with 33s. Subscribe for more
whats the biggest and widest tires i can go without a leveling kit on a f150 2019 4x4? i want it to poke out like yours though
Just put the leveling kit it makes a huge difference
@@ShaunOconnell u got any rubbing issues?
Slight rub
@@ShaunOconnell sorry last question, if i go level, whats a good setup that’ll poke out aggressive but wont rub
20x9 with some 33s
Going for this look on my 2020 lariat. Nice truck man 🔥
Thanks man subscribe for more!
@@ShaunOconnell subscribed
What do you keep your psi at?
Bro nice truck man! I don’t see why so many people on here hating! Yal need to show love or slide. He said everything yal talk about in the video. They trying to find all the things to say that is negative. Dope truck and good video bro! This helped me out a lot and I’m bout to get the same set up.💯💯
Thanks bro good luck with the new setup, subscribe for more!
Can u still pull into the garage.
I have a 2WD and was wondering if installed the same leveling kit would I be at the same height as you?
Yes you would. Subscribe for more
2wd are 2” lower than 4wd
I have a 2” leveling kit running 22x12s on 33. Think the 2.5” will make that big of a difference for me to need to change?
Nah it won’t make a huge difference
Subscribe for more
how much can you turn? i got same setup Lol
Full lock, it only rubs in reverse
35% on the shield? This truck looks absolutely perfect!
50% on the entire windshield thanks man!!
Can you tell me how y’all your truck is?
I’m trying to see if it will fit in my garage with your set up
Nice truck... What do you do for a living??
Thanks man and I’m an active duty Marine. Subscribe for more!
Do you think your tire size set up would look nice with a six inch lift?
On a 6” lift I would go with 35x12.50x22 for the tire. The 33 will look small. Subscribe for more
@@ShaunOconnell i agree but my truck doesn't like the 35s way too big and heavy.
This truck look amazing.
Thanks subscribe for more
Do you if your wheel and tire set up changed your ride height? If so, how much. Want to do it, but concerned about fitting in my garage.
Yes they do
Dope truck. Would all this apply to my 2016 Lariat Screw 2wd?
Yes it would subscribe for more
Which brand is the wheel and tire ? Nice truck
Fuel triton 22x12 subscribe for more 33” nitro trail grapplers
Did you do any trimming to the crash bars?
Yes I did
Hi there...are you using stock lug nuts on these wheels or aftermarket?
Raj Ram you have to use aftermarket lug nuts with aftermarket wheels. Subscribe for more Raj
Bro where can I find those seats?? That's badass!
Google roadwire leather interior or join 13th gen f150 group there are vendors in there. Subscribe for more bro
@@ShaunOconnell you're the man!
You rotating your tires man? They are looking pretty choppy up front...
I’m about to rotate them now haha
A M shut the fuck up
Do the 2014 have the crash bars?
No they do not. Subscribe for more
Love the small trim extras
Thanks man subscribe for more
Awesome setup! Like the truck…. Thanks for the video….
Duuude... I have RR '16 and this the direction I would like to go. Looks great! Where did you get the grille?
Bought an oem platinum grill off of eBay, took it to a local body shop and had them paint it gloss black with race red inserts. Race red is the best color I just bought a matching mustang in the same color! Subscribe for more
I would throw some spacers on there too and take the tow mirrors off and it would be perfect
Good ideas, subscribe for more
What Trailer hitch ball do you have?
2” ball
Gen-y Hitch
Shaun O’Connell thank you
Plan on putting a 3inch level on my 2017 tomorrow. Do you really think going with a 3 inch will put that much strain on the front end?
It will be fine, your upper control arms will hit the spring on big bumps. Most people who do a 3” level put aftermarket control arms. Subscribe for more Gat
Check out custom offsets... It going with a 3 inch they always say upgrade your suspension so you don't have pre mature ware!
Sup man I have a 2016 I wanna put 22s with 33s on it what all do I need to do ?
Im from North Carolina. Congrats on your house!! Blessings 🙏
Thanks brother, what part of NC?
You should show us what you got done to the motor
Will do. Sctx4 injen intake and afe 4” exhaust
ooooof man , what percent tint ??? 😍
5% and 50% on the front windshield. Subscribe for more
Love everything about the truck man! My goals is to own this exact look
Appreciate it man it has come a long way
Gunny, I got the same year and same Race Red, thanks for the inspiration. Semper Fi.
Semper Fi brother subscribe for more
@@ShaunOconnell , do you even have to ask for the sub!? lol
Damn that evo and gto 😍
Great video brother! I get so tired of people asking me if I rub with 35s lol
Haha right!!! Subscribe for more
Does your truck fit in the garage? Trying to find the right height for my truck
I’ve never tried to fit it in my garage because I park my mustang and my atvs in there. It would be very close
Perfect explanation
Any loss in performance?
None at all. Subscribe for more
Who did you use to paint your your headlights??
Oem race red paint. Subscribe for more
Retro customz is the best to go with
Thanks for this video I needed this
Haha thanks bro!!
What headlights are those
Adriansbox yuh oem led that have been opened and painted to match subscribe for more!
Very nice. Very informative. I subbed!
Thanks!!
Where did you get your tow mirrors
From syppo but I reccomend oem
What would I have to do different in a 2wd
Nothing, it would be the same setup to my knowledge
I just bought 20x10s but now i wish i had gotten 12s
Nice truck 💯💯💯💯
What size does it have? I want to po it on my 2011 f150...please reply
22x12 on 33s
Do you think I have to use a level kit of 2 inches in front? ..I hope you can guide me so, mine is a 2011 f150..all black
I wouldn’t you should do a 2.5” kit
I can send you my number so that I can send you a pic of my truck to see what you recomend...I'm kind of scare I will mess up...
Can you send me the complete size for the tire?
Looks great
Thanks man, love y’all trucks
Just Beautiful 🇺🇸
Whats the wheel offset?
-22, subscribe for more!
do you have a level kit?
Yup 2.5” up front
Nice!!!
Thanks please subscribe for more
Headlights?
Customized oem led headlights subscribe for more, outlaw LEDs can make you a set
Dat Evo doe!! Who did your headlights??
Haha thanks, the evo is surely coming along I’ll do a video on it soon. Redline lighting did my headlights. Awesome work for sure check them out on Facebook
Shaun O’Connell thanks brotha! Nice toys! Miss my Evo’s!! Truck looks sick!
Came for the truck, stayed for the evo....
Subscribe for more brother!
Cutting the crash bars void the warrenty
You’re wrong and you don’t even know how to spell warranty
Thanks for the information!!!!!!!!
Thanks please subscribe for more!
Wow nice truck I just subbed
Thanks man
Can you fit 33s with a level?
Anything will fit with the sawzaw brother
@@ShaunOconnell 😂😂👊🏼
Ha it looks goofy without the block ..with my 2.5 level I got the 2” block for the rear. Evidently you don’t tow ..
Uhh watch my other videos. I tow a 20’ trailer almost every week
Nice ass truck, not even a ford guy but still lol
Thanks Fernando!!
so whats your wheel/tire/suspension setup?
Check other videos have a suspension overview video with all that info
Wow nice fucken truck!!!
Just sub'd 👍
Christian Young thanks man!!
Should've went 35s them baby rubbers
35s won’t fit on 12 wide wheels on a level jajay
@@ShaunOconnell My buddy has a 13 F1 with 2.5 level 20x12 35x12.50 with -44 offset but ok dude lol.
What’s his Instagram...
@@DoctorRickSanchez bro he's running 22x12 not a 20x12 u can't fit 35 and 22s on just a level I tried! However I am running 20x12 -44 offsett on 35s on a 2.25" level but I don't have the stock front bumper
🙌🏼👍🏼
Okay?
Farmer Life okay what?
I think it looks dumb when the back lower than the front.
Agree, if you watch my other videos I brought the back end up to level the truck out
You couldn't buy a dog house where I live for 160k 😭
Haha time to move bro! Subscribe for more
damnnnn just leaking our address to the world😅
Lmfao they can send us some care packages of stuff
@@ShaunOconnell yes
She nice
Subscribe for more
sorry but, putting a platinum tag on an xlt is pretty low baller bro lol its fine as it is! dont make it something its not. just my .02
Sorry that you’re poor
@@ShaunOconnell lmfao i sure as hell dont go slapping platinum badges on xlts to make something it isnt, your clueless comment just made you that more ridiculous
It’s called being unique. Sorry your truck is stock and boring and you’re poor
@@ShaunOconnell lol nope thats called FAKE. What else you got?? i can go all you want bro, you havent a clue what i own.
You poor boy
We’re
Subscribe for more
You get a GTO? Lol
Haha naw it’s my girlfriend’s brothers. We just put an axle in it, shit needs a clutch bad so probably gonna do that soon. Gotta pump the damn thing up to get it moving
Oh true make a clutch Install video on it when he gets the clutch in lol
Those fromts are cupping bad
You’re right, subscribe for more