Incredible video. thank you very much. I'd like to make question. I have this phone with 3cx. When I do blind transfer sometimes the receiver is busy or didn't answer, do you know if there is a way to return the call to the original caller in case it happens. I was looking for but I didn't find it.
@@ramonpariente 3CX does have this feature and it's called "Callback" or "Transfer Back on Busy". This feature can be configured in the admin console at Settings > General > Transfer Back on Busy. Hope this helps!
You would need either a PBX or a Hosted Line. You'll also need an IP Phone. The phone well also need to be connected to the internet via a router or switch.
If you mean you want an analog phone to go over the internet, you can use an ATA device connected to a PBX, but if you don't have one you can use another service for VoIP such as magicJACK.
@@School_BusDriver Hello! Please check out my provisioning tutorial with this phone and 3CX as that is a good starting point on figuring how provisioning works.
hey, i'm wondering if you can help me setup my yealink t31p onto 3cx like just a call between us or screensharing on discord or something to set it up? (it's cloud hosted)
@@ishanaggarwal93 I recommend 3CX as it is simple to use and provision. I have a video on provisioning this phone with 3CX as well. If you provision to the cloud with their supported method, it will work anywhere with internet.
@@Martin-NT thanks for update. I guess 3cx needs sip number. But in tanzania, there only mobile or land line number. No sip provider. Can we use our existing mobile numbers in tanzania to connect to 3cx if its somehow possible?
Hello Martin, I have problem with my sip phone, my user name and password can work with software sip phone, (tested with android, kos and windows) but when I put my user and pass to my sip phone always register failed, my ip phone yealink t31 and yealink t20, why this Problem can Happen to me.?
If it keeps saying Register Failure, even though that it's the correct credentials, it might be because of a multitude of reasons such as audio codec's, Yealink RPS lock, etc. When provisioning, try checking the 3CX Management Console Logs as it will help you determine the issue with the phone. If you'd like further assistance, feel free to contact me via my email address visible on my about section. Thank you!
@@nra3009 BLF line keys are a function where it can monitor another extension, such as showing the busy status. Similar to a speed dial but kind of dynamic in a way.
If you want to request a tutorial for FreePBX, feel free to ask me! Anything in particular you want to know about? Maybe I'll do a very brief introduction to FreePBX and the basics of it. Sorry for the late response.
Incredible video. thank you very much. I'd like to make question. I have this phone with 3cx. When I do blind transfer sometimes the receiver is busy or didn't answer, do you know if there is a way to return the call to the original caller in case it happens. I was looking for but I didn't find it.
@@ramonpariente 3CX does have this feature and it's called "Callback" or "Transfer Back on Busy". This feature can be configured in the admin console at Settings > General > Transfer Back on Busy. Hope this helps!
Amazing video! Truly underrated!
Hi Martin
How can I lock the SIP T31p phone using the personal code?
@@monty4455 Do you mean a voicemail PIN? That is done through your PBX.
Hi, if this possible set one voip and call to who owns standard phone and with pc port?
You would need either a PBX or a Hosted Line. You'll also need an IP Phone. The phone well also need to be connected to the internet via a router or switch.
If you mean you want an analog phone to go over the internet, you can use an ATA device connected to a PBX, but if you don't have one you can use another service for VoIP such as magicJACK.
@@Martin-NT I mean connect IP Phone just like normal and setup with 3CX or MAGIC JACK if this possible to call phone number not office just sim number
Yes, you can set the IP phone up with 3CX and hook up a sip trunk for outbound calls or use hosted lines from VoipMS or ring central.
@@Martin-NT Okey thanks for helping)
Hi! i hope you are doing fine but i have a question. Can you show me how you set it up. I wanna know how you created your phone number up there
@@School_BusDriver Hello! Please check out my provisioning tutorial with this phone and 3CX as that is a good starting point on figuring how provisioning works.
@@Martin-NT ok thank you
hey, i'm wondering if you can help me setup my yealink t31p onto 3cx like just a call between us or screensharing on discord or something to set it up? (it's cloud hosted)
Sure, my email is in my about page so email me there.
Can i receive and make calls while travelling abroad on same number?
That will depends on your PBX and your configuration type. But yes, you can take this desk phone with you while travelling abroad.
@@Martin-NTpls suggest which pbx will be suitable and how to achieve this.
@@ishanaggarwal93 I recommend 3CX as it is simple to use and provision. I have a video on provisioning this phone with 3CX as well. If you provision to the cloud with their supported method, it will work anywhere with internet.
@@Martin-NT thanks for update. I guess 3cx needs sip number. But in tanzania, there only mobile or land line number. No sip provider. Can we use our existing mobile numbers in tanzania to connect to 3cx if its somehow possible?
@@ishanaggarwal93 I'm not sure, you may need to go with another service from another country
Hi it is asking for a password when I've set up the phone
Is 3CX Compatible With A Yealink T40G?
Yes, 3CX is compatible with the T40G. You can follow the provisioning guide here: www.3cx.com/sip-phones/yealink-t4-series/
Thank you so much!
@@wolfzarrowalarms No problem, if you require further assistance please feel free to contact me via my business email.
Hello Martin, I have problem with my sip phone, my user name and password can work with software sip phone, (tested with android, kos and windows) but when I put my user and pass to my sip phone always register failed, my ip phone yealink t31 and yealink t20, why this Problem can Happen to me.?
If it keeps saying Register Failure, even though that it's the correct credentials, it might be because of a multitude of reasons such as audio codec's, Yealink RPS lock, etc. When provisioning, try checking the 3CX Management Console Logs as it will help you determine the issue with the phone. If you'd like further assistance, feel free to contact me via my email address visible on my about section. Thank you!
Hi, how can I pick a call of other ip Yealink phone?
By that, do you mean that you want to be able to retrieve a call that is ringing on another phone? You will be able to do that using BLF line keys.
@@Martin-NThi..what is BLF line keys?
@@nra3009 BLF line keys are a function where it can monitor another extension, such as showing the busy status. Similar to a speed dial but kind of dynamic in a way.
hi
👋
tutorials for Freepbx?
If you want to request a tutorial for FreePBX, feel free to ask me! Anything in particular you want to know about? Maybe I'll do a very brief introduction to FreePBX and the basics of it. Sorry for the late response.
@@Martin-NT
Maybe just a general overview on how it works or something 😄 I personally find it confusing and I can't find so many good tutorials