A thousand likes! Dude this was so fun! I loved seeing the behind the scenes. And yes it is generally advised to activate one's brain. Thank you again for such thoughtful gifts! ❤ PS... I've literally never seen someone thumb a ratchet wrench like that 🤯
Never? I thought that was just normal practice. Sometimes it's more convenient than taking off and extension, sometimes you have a better grip on the socket than you'd have on the nut or bolt, sometimes the fastener is inaccessible... all kinds of reasons you might end up doing this. Especially if you don't have an impact or can't use one on the thing you're spinning.
You realise Brandon that we all are going to be looking for this on your next drop? You had better make sure that at least one shot in the video includes that corner of your shop!😉
Holy sh... I'm truly at a loss for words here. I'll reply to everyone once I've finished nursing my Christmas hangover, but I just wanted to say that I'm beyond flattered by this overwhelming support from everyone. It's a wonderful feeling, and it means the absolute world to me. Thank you all so much ❤ More videos to come! Merry Christmas!
Holy hell mate, i was done watching the video and looked at the subscriber and comment count expecting several thousand, its a crime that it wasnt like that, you go man.
Very glad that the Inheritance Machining in my algorithm pulled me here. Such a great video from such a small channel! I more or less randomly stumbled across IM, so don't watch many machining channels, but this one gets my sub. Very similar vibes.
Great content, with great presentation and 'story telling'. Came from Inheritance Machining's community post. New sub from me! I hope you get a ton of views and subs as you deserve it based on the quality of this vid. I also like the little homage to different channels, This Old Tony's 'hand cutting' stock, Blondiehacks with the sarky on-screen text when the camera view was slightly obscured etc..
Just a little tip, whenever you file or hand sand something in the lathe, make sure to cover up the ways (is that the right term in english? I'm talking about the tracks where your toolpost and tail stock are moving about). Otherwise the dust might get in-between and act like sandpaper, thus you get more ware and tare
Well done Erik, new subscriber here and a long time subscriber to IM. I look forward to seeing what else you create. I too have been inspired by Brandon, but I haven't yet finished that project, nor filmed any of it. Merry Christmas!
Never knew I needed more machining in my life until I stumbled across this. Also, for a moment there I thought TOT had a hidden channel, this was brilliant! 😆
I watched this thinking "O my god an English version of This Old Tony!" looks like others had the same thought. Wonder if "This Old Basil" it taken... Subscribed!!!!
Combine the engaging content, editing and machining and stir well. Then add to taste, 3D printing and laser cutting, mix well for 20 minutes and you have successfully baked a new subscriber.
Awesome video, you've got a new subscriber and fan! And any friend of Inheritance Machining is A+ in my book. By the way, do you realize that the name of your channel has a great acronym: E.R.I.K.
Okay... So I'll admit that the thumbnail had me excited to see a new @InheritanceMachining video. But after realizing what it was, my interest shifted and I'm beyond happy that I clicked. Great video and such a thoughtful and creative gift. You've gained a new sub here and I'm excited to see everything that I've missed out on, so far. Cheers and Merry Christmas!
TOT clone. I guess if you enjoy it, good for you. I find it hard to enjoy with the thought of TOT in the back of.my mind half the time. IMO,let us see your own original flavour. That would be a lot better, and true to yourself. My 2c.
A thousand likes! Dude this was so fun! I loved seeing the behind the scenes. And yes it is generally advised to activate one's brain. Thank you again for such thoughtful gifts! ❤
PS... I've literally never seen someone thumb a ratchet wrench like that 🤯
Clammy hands are grippy!
Never? I thought that was just normal practice.
Sometimes it's more convenient than taking off and extension, sometimes you have a better grip on the socket than you'd have on the nut or bolt, sometimes the fastener is inaccessible... all kinds of reasons you might end up doing this. Especially if you don't have an impact or can't use one on the thing you're spinning.
@@LifeInJamblesI too thought it as common practice.
You realise Brandon that we all are going to be looking for this on your next drop?
You had better make sure that at least one shot in the video includes that corner of your shop!😉
Holy sh... I'm truly at a loss for words here. I'll reply to everyone once I've finished nursing my Christmas hangover, but I just wanted to say that I'm beyond flattered by this overwhelming support from everyone. It's a wonderful feeling, and it means the absolute world to me.
Thank you all so much ❤
More videos to come!
Merry Christmas!
What a strange episode of This old Tony.
His voice sounds ~~a bit~~ *a huuge lot* different in this one...
Lol, that was exactly my first thought!
He must have a cold or something
Ngl. Inheritance in the title brought me here. Your narration, editing and content kept me. Instant subscribe right here.
Merry Christmas!
The this old tony nods help as well.
Holy hell mate, i was done watching the video and looked at the subscriber and comment count expecting several thousand, its a crime that it wasnt like that, you go man.
Same here. Definitely a lot more people need to subscribe to this channel.
Editing is impeccable for a channel of this size. People get 100x this size and don't have such a clean edit
Channel Size has nothing to do with it unfortunately
In the mean time, theres a chick using her cell phone trying on thongs on youtube and received 8million views with 3million subs.
Do not encourage this type of video. Clearly he’s trying to piggy back from inheritance machining.
Finding another great machining youtube channel is a great Christmas gift indeed
When I saw you put the swarf in, I thought "yep, that's Brandon's milling machine"! 😂😂
I am really glad UA-cam randomly popped you up in my timeline. Top-tier content, my good sir!
This.😊
A small box sitting on the end mill labeled "box of shame", would have been (chefs kiss)!
This Old Tony’s English brother from another mother? 20:28
Don't forget starting at 10:07 through 10:34
Very glad that the Inheritance Machining in my algorithm pulled me here. Such a great video from such a small channel!
I more or less randomly stumbled across IM, so don't watch many machining channels, but this one gets my sub. Very similar vibes.
A more morbid combo between inheritance machining and this old tony
Great content, with great presentation and 'story telling'. Came from Inheritance Machining's community post. New sub from me! I hope you get a ton of views and subs as you deserve it based on the quality of this vid.
I also like the little homage to different channels, This Old Tony's 'hand cutting' stock, Blondiehacks with the sarky on-screen text when the camera view was slightly obscured etc..
This Old Tony? No….Ye Olde Erik? Yes….
Just a little tip, whenever you file or hand sand something in the lathe, make sure to cover up the ways (is that the right term in english? I'm talking about the tracks where your toolpost and tail stock are moving about). Otherwise the dust might get in-between and act like sandpaper, thus you get more ware and tare
Yes, the term is "ways" or " bed ways"
that would apply to hand sanding, not filing. There is no "dust" when filing.
Always glad to find a great quality channel. Can't wait to watch your subscription count skyrocket.
Here from Inheritance Machining. Awesome mix of high quality content, TOT style jokes and brilliant edits. You’ve won me over!
Well done Erik, new subscriber here and a long time subscriber to IM. I look forward to seeing what else you create. I too have been inspired by Brandon, but I haven't yet finished that project, nor filmed any of it. Merry Christmas!
What an Awesome Christmas Special! Another great video!
Merry Christmas ERiK!
Do I spy some influence from This Old Tony's editing style, or is this just a case of convergent humor?
I'm surprised you don't have more subscribers I'm definitely going to keep up to date watching any new videos that you make
That turned out fantastic!!!
A little late, but I wish you and your family a very Merry Christmas!! Hope you had a wonderful one!
Never knew I needed more machining in my life until I stumbled across this. Also, for a moment there I thought TOT had a hidden channel, this was brilliant! 😆
The algorithm led me here, probably because you put Inheritance Machining in the title. Either way, now I have another machining channel to watch!
How absolutely kewl is that ! Well done, very well done !
I am number 561, and very happy to have discovered your channel! Merry Christmas! 😀
Gosh, that was so good. Instant sub 👍
Thank you Inheritance for bringing the channel to our attention.
Bro! The 'This Old Tony's style of editing! Fantastic! @thisoldtony
Its so nice to see someone taking joy from something so personal
Wow just wow! The editing and quality is amazing! New sub for sure! Keep it up
That is too cool, definitely worth a subscription.
I really like the lathe moments with the music..definetly a nice touch brother
Oh look! Another visual gag machinist channel! Subbed! 😄👍
The best Christmas present ever - thanks for another upload!
Merry Christmas. Looking forward to following this channel.
Alwase love to see new machining channels
I love all the warm lighting in your shots. I think i found my next new maching channel. Subscribed.
audio video editing A+++++++++, where are your subscribers???? cheers for the video, excellent work!
As another commenter said, you're literally British Brandon. And I love it, big ups
Was thinking British This Old Tony...
Randomly popped up in my feed ... (well maybe someone posted a link)
And now I'm subscribed!
Thanks for sharing 🇨🇦
Brits Old Tony?
Great work, keep it up!
I loved this video. Came here from inheritance machining. The editing is amazing. New subscriber gained from me!
That was awesome merry Christmas and a happy new year
Spectacular. And the chips by the mill, I tittered.
Happy Christmas dude, just found your channel and subbed 🎉 have a great one 👍
So awesome! Happy new year 😃
Well done! What a gorgeous Christmas gift!
you got my sub! great work !!! cant wait for more
Instant sub.... And your voice is so nice!
I watched this thinking "O my god an English version of This Old Tony!" looks like others had the same thought. Wonder if "This Old Basil" it taken... Subscribed!!!!
That is really nice. I am sure it will be appreciated.
Combine the engaging content, editing and machining and stir well. Then add to taste, 3D printing and laser cutting, mix well for 20 minutes and you have successfully baked a new subscriber.
Just stumbled across your channel. Very “The Old Tony”
Mimicry is the purest form of flattery 👌 welcome This Young Tony. We hope you have a better upload schedule than the OG these days
Another "Maker's Secret Santa" ring in the making?
Thank you for subtitles.
I see some TOT influence there, I dig it!
Amazing content. Thank you.
2:35 Ah, the elusive "Sanding Hammer". I've been looking for one, but unable to find them.
New subscriber. Fantastic video.
My first video of this channel and I must say it is - IF Inheritance Machining was British
There are a lot of This Old Tony vibes though.
Any friend of Brandon's is a friend of mine, and you know that chamfers separate us from the animals. Merry Christmas.
when collab
Awesome video, I can help with CAD if needs be 😊👍
Great video. New subscriber from Wales
852 present and loving it!
Awesome video, you've got a new subscriber and fan! And any friend of Inheritance Machining is A+ in my book. By the way, do you realize that the name of your channel has a great acronym: E.R.I.K.
Merry Christmas
If you don't mind me asking, what is the lathe model that you have?
Mmmm, boiled aluminum, just like mum used to make!
4:40 guitar jumpscare
Beautiful
The small milling machine..... Is up. If I remember correctly the same one Joe pi did
Never mind. I guess I should have watched the rest of the video first. Joe pie makes several miniature machines. They're fantastic
Happy late Christmas 🎄
Cool project!
You have This Old Tony vibes
I finally know what IM's name is!
Subscribed!
great video!
This was great!
Very cool!
Liked and subscribed.
Okay... So I'll admit that the thumbnail had me excited to see a new @InheritanceMachining video. But after realizing what it was, my interest shifted and I'm beyond happy that I clicked. Great video and such a thoughtful and creative gift. You've gained a new sub here and I'm excited to see everything that I've missed out on, so far. Cheers and Merry Christmas!
TOT clone. I guess if you enjoy it, good for you. I find it hard to enjoy with the thought of TOT in the back of.my mind half the time. IMO,let us see your own original flavour. That would be a lot better, and true to yourself. My 2c.
WELL DONE. You just proved that you don’t need a massive shop and expensive equipment to make something so beautiful. Well done indeed
Cool.
Some tot vibes.
Hydrogen and Oxygen bubbles!
Am I the only one who thinks that the engine sound is from a VW Diesel engine?? 😂
It's Look Mum Not This Old Tony
The video format is very clearly inspired by This Old Tony. But the jokes need a lot more work.