Wrap Around FRONT Bumper: Ski Doo Expedition Accessories E4
Вставка
- Опубліковано 7 січ 2023
- Let's install the Wrap Around Front Bumper, Adventure Plate, and Front Hitch Receiver kits on a 2023 Ski Doo Expedition SWT.
Episode 4 in the accessory installation series picks up where we left off with the Full Body Skid Plate installation. We cover the preparation required for mounting the bumper and show how the three kits fit together to protect the front of the machine.
Videos in this series:
135 Liter Cargo Box
HD rear bumper with hitch
Full Body skid plate
Adventure plate
Wrap arounds front bumper
Heavy duty front receiver
Extra wide ski skins
Instructions for these installations can be found at:
www.instructions.BRP.com
Series Playlist is at:
• 2023 Ski Doo Expeditio... - Навчання та стиль
If you are interested in some Doug's Messy Garage merch, check out my store at: dougs-messy-garage.myspreadshop.com/
Nice tutorial
Thanks for watching and for taking the time to comment.
What an informative series. Thanks very much! The engineering that goes into these machines never ceases to amaze.
Thank you for your kind comment.
That’s impressive so many accessories this will be a interesting video going to watch it to the end to see the transformation 👍
Thanks Jeff. Machine turned out great. I am trying to convince the owner to add a few more accessories so I can make some more videos.
@@DougsMessyGarage I haven’t seen very many accessory videos yes lots of up grade videos like mufflers and other engine up grades but not much in terms of add on’s for snowmobiles
Really well done video thanks. I’ll be watching more.
Thanks for watching
Solid work!!
Thanks. Should be useful to bring the installation of the three kits together into one How-To.
Good job!
Thanks!
Used a 90 deg drill attachment for the rivets on the boards. Worked slicker than snake snot.
Actually had to completely loosen the expansion chamber (600R ETEC) on the exhaust to drill out those 1/4" holes for the bumper gaurd supports.
What a contortionist trick to get the springs back on. The set at the muffler were ok, but wowsers, the manifold to the expansion chamber was brutal.
Ouch, yeah the two-stroke expansion chamber would certainly make back drilling this hole quite a bit more challenging.
@@DougsMessyGarage I completely forgot, had to take the bolts out of the radiator and shift it upwards in order to spin the expansion chamber to get the drill in place. Just in case you ever run into an install on a 2 stroke. Cheers man.
@@jimeverden2244 Great point, thanks for sharing.
Those rivets are a pain. I found it easiest to take my small dremel with cut disc and cut them off flush from the bottom. It was 10 times cleaner and faster than drilling them. Great videos! Thanks
Thanks for sharing
Some of the auxiliary lights would be cool.
That's not a bad idea. I will see if I can convince the owner of the machine to spring for them.
@@DougsMessyGarage even a review of accessories that he has now and the machine overall would be cool too. What accessories are worth it and which are not.
Very informative and helpful. Ill be doing the same tomorrow, so thanks! Is this bumper strong enough to grab onto when pulling the machine when stuck in the snow (by hand only)?
With the bumper attaching solidly to the base front bumper, the cast aluminum front suspension cradle and the front of the running boards, it is very stout. We haven't needed to use it to pull the machine out of deep snow yet but I have no reservations about doing so.
Interesting
Thanks for watching
Any chance you're going to do a video on the tunnel protector?
Unfortunately, the owner of the sled did the tunnel protector on his own and I didn't get to record it. The Gen 4 tunnel protector is pretty simple to do though. I believe it fits into hangers at the front and has two bolts to hold it up in place at the back. Much simpler than the XU chassis was to install.
Is it the same kind of installation with the kit for a 16’’ Expedition Sport 2019 ?
I'm not sure if the '19 Sport was a Rev-XU or a Gen IV. If it's a Gen IV then it should be very similar. If it is a Rev XU, it will be different. I know my 2019 SWT is a Rev-XU but the Sport went to the Gen IV a year or two before the LE and SWT did so you could have either.
@@DougsMessyGarage it’s a gen 4 ‘’wide’’. But with 16’’ of track.
@@richardcontant4659 Then this process should be pretty close.
@@DougsMessyGarage thank you so much !have a great summer, and let winter come !! Haha