You should do a mod where you replace the battery with an external power bank. The battery that comes with the gun is too easy to ruin. It would be neat to rewire the gun to have a 6 foot usb wire hanging out of the battery port and plugged into a separate power bank in your pocket. Easier to just buy a new battery, but not as cool.
The SRB 375 uses the same voltage (7.4V) battery, but instead uses the 3 pin charging connector to connect to the blaster. Not much space to use this large battery in the 375.
Thanks, yeah figured that out after using it. It's still annoying when using it at night, so I turned the LEDs into a tracer mod for glow gel balls ua-cam.com/video/c3-62DxvW4A/v-deo.html
@@engineerable I own the SRB1300 and the UnlocX also. I just wanted another SRB1300 for friends and family to use lol. I've been looking into the blasters they use in australia and china they seem to be better than the gel blasters we have in the states atm. Jinming is one of the popular brands if i recall
@@UrMothersLoverr SRB400 is basically a Wells G36c, sold in Australia/Asia which is a bit on the lower end of blasters. However both it and SRB 1200 use airsoft V3 gearbox, so they are easily upgradable. I don't like most of the mil sim stuff they have in Australia. Just doing this for fun and don't want anyone to confuse this with a real gun. I've bought some BF P90, and quality is the same or lower than the Splatrball. Jinming does make some models that are good quality stock. Most people end up upgrading to metal gears eventually, which you can do with your SRB1200 also.
@@UrMothersLoverr I haven't taken apart the UNLOCX yet, but from what I can tell it uses airsoft V2 gearbox which is much more popular than V3, and has many upgrades. Same gears, pistons as V2.
You need to replace gears, and plunger with quality metal gears. Check out my guide here www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
even better, check out this video of removing the lights and using them as tracer units for glow in the dark gel balls: ua-cam.com/video/c3-62DxvW4A/v-deo.html
Check near the bottom of my article for a link to the gel balls I use. They are hard: www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
Link is near the bottom of this Splatrball upgrade page www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
You have to DIY a tracer unit. I will be making a video about how to do that. I'm going to disconnect those annoying blue lights (blinds you at night) and use the LED driver circuit board to power the UV LEDs for the tracer unit. UPDATE! Video - ua-cam.com/video/c3-62DxvW4A/v-deo.html
@@engineerable omg thank you those lights are so dumb. but now thinking about it could you change the color of the blue to something else with a different color led?
They shoot very well and strong, their only problem is their trigger that sooner or later will stop shooting
You should do a mod where you replace the battery with an external power bank.
The battery that comes with the gun is too easy to ruin. It would be neat to rewire the gun to have a 6 foot usb wire hanging out of the battery port and plugged into a separate power bank in your pocket.
Easier to just buy a new battery, but not as cool.
So do the magazines work on both
Yes!!!!!!
Hi, do you think you can use the blaster without the top pieces? I want to do a mod, but I don't want to screw everything back on.
Yes, you can leave them off.
im pretty sure the led light is a uv light
@@TikoLol-nr7rk I tried it for lighting up the Glow gels, and it worked pretty good, but not quite as good as a UV LED
@@engineerable i was right tho
If I put this battery on to my Srb 375 do you think that the same problem will happen to it?
The SRB 375 uses the same voltage (7.4V) battery, but instead uses the 3 pin charging connector to connect to the blaster. Not much space to use this large battery in the 375.
The led turns off after a minute of no motion so you don’t really need do mod it
Thanks, yeah figured that out after using it. It's still annoying when using it at night, so I turned the LEDs into a tracer mod for glow gel balls ua-cam.com/video/c3-62DxvW4A/v-deo.html
Can you make a video on taking it apart like the other one
Working on it. Coming soon.
Watch the video of the teardown ua-cam.com/video/FKxPLUxrIpM/v-deo.html
Watch the tracer mod video. Pew pew. ua-cam.com/video/c3-62DxvW4A/v-deo.html
Where can I purchase the hardened gel balls?
Amazon or at some toy gun shop and other stuff like that
@@GelBoy2what he said, plus make sure the ammo is 7-8mm
Any thing works
The Splaterball orbeez are not really strong. You should use other gel orbeez
What are your favorites? These are mine www.engineerable.com/single-post/best-gel-ball-ammo-for-gel-blasters-7-5mm-or-7-8mm-diameter
It’s not on Amazon anymore what happened ?
😂 was there when I posted video. Must have gone out of stock.
it somehow recently exploded in popularity in the past month or two. Probably from tiktok
can't even find these in store anymore or online at msrp
They are popular right now and sold out. Look at UNLOCX, it is nice too and in stock. myunlocx.com/products/unlocx-gel-ball-blaster
@@engineerable I own the SRB1300 and the UnlocX also. I just wanted another SRB1300 for friends and family to use lol. I've been looking into the blasters they use in australia and china they seem to be better than the gel blasters we have in the states atm. Jinming is one of the popular brands if i recall
@@UrMothersLoverr SRB400 is basically a Wells G36c, sold in Australia/Asia which is a bit on the lower end of blasters. However both it and SRB 1200 use airsoft V3 gearbox, so they are easily upgradable. I don't like most of the mil sim stuff they have in Australia. Just doing this for fun and don't want anyone to confuse this with a real gun. I've bought some BF P90, and quality is the same or lower than the Splatrball. Jinming does make some models that are good quality stock. Most people end up upgrading to metal gears eventually, which you can do with your SRB1200 also.
@@UrMothersLoverr I haven't taken apart the UNLOCX yet, but from what I can tell it uses airsoft V2 gearbox which is much more popular than V3, and has many upgrades. Same gears, pistons as V2.
@@UrMothersLoverr Why do you prefer the SRB1200 over the UNLOCX?
I put a 11.1v battery in mines and it stalled out yeah what should I do?
You need to replace gears, and plunger with quality metal gears. Check out my guide here www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
Fr?
I can’t plug battery in right
are u going to make a video of taking off the light
even better, check out this video of removing the lights and using them as tracer units for glow in the dark gel balls: ua-cam.com/video/c3-62DxvW4A/v-deo.html
@@engineerable thanks
Can you put a link to what gel balls you use please
Check near the bottom of my article for a link to the gel balls I use. They are hard: www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
@@engineerable Thank you 👍🏽
How can I tell if my battery is charging
There is a red light that appears then it disappeares
Can you put a link for the war interest gel balls please?
Link is near the bottom of this Splatrball upgrade page www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
Where can u buy the filler funnel for the drum because I have a 800 round drum and it’s hard to fill
Would be easy to make your own. Use the plastic from the window of some product packaging.
Or use a regular funnel that fits
@@engineerable but I’m just a kid tho so I don’t know how
@@tazmondallen5274 Watch some videos, if you can use scissors and tape, you can do it
@@engineerable can u do more videos of painting the srb 400 but can you put the drum on them?
Dose the light kill the battery
No, it has a motion sensor and turns off after a minute of being still.
So how much was the srb1200 I really want to get one
Check the link in description for the most recent price
How can u make it work with 11.1v battery
Use an 11.1V battery till you strip the gears or burn out the motor, then upgrade the parts ua-cam.com/video/3o4r5-Xr93U/v-deo.html
How many rounds comes with the war interset 3.0 harden gel balls, there cheap but doesn't say how many comrs
Can u take it apart
Yep, that video will be up soon. Stay tuned!
no longer on amazon
😂 was there when I posted video. Must have gone out of stock.
Yea I order mine like a week ago just got it in time
take it apart i know its hard because you have to rip off the white plastics
The white plastic is glued on, so yes, it will need to be carefully ripped off. Screws will need to be added to put them back on.
does the light stay on
The light has a ~1minute timer that is motion activated. It stays on while you are handling the blaster.
@@engineerable thanks😁
Did you get it at Walmart
Walmart. com or Amazon amzn.to/3ibpEAl
I had a 11v battery and it fried my SRB400😂
is there a tracer unit for this?
and if not can you wire one in?
You have to DIY a tracer unit. I will be making a video about how to do that. I'm going to disconnect those annoying blue lights (blinds you at night) and use the LED driver circuit board to power the UV LEDs for the tracer unit. UPDATE! Video - ua-cam.com/video/c3-62DxvW4A/v-deo.html
@@engineerable omg thank you those lights are so dumb. but now thinking about it could you change the color of the blue to something else with a different color led?
@@chilllsss6284 I don't think it will change color, because the plastic is blue. I'll may add a switch too.
If you didn't see it yet, here's the tracer mod video for this blaster ua-cam.com/video/c3-62DxvW4A/v-deo.html
First
Vs
Vs what?
LOL WATCH AT 5:34
UR . MOM