Great work! As the owner of a rusty , water cooled converted '73, this will help me when the time comes. As far as that radiator goes, use the biggest fucking radiator you can fit it there! You'll be glad you did when your climbing a hill on a hot day in the summer, far from home!
OK hooked, binge watched all 63 episodes in 2 days and you have given me the inspiration to tackle Ugly Betty (my 69 bus). Great work and it's amazing to see how you have grown in confidence with everything you do.
You’re welding skills are top notch The bus looks great Since my tintop doesn’t have the popup I have a kids cot I’d like to send you it’s in great condition kinda a bus warming gift
A rotisserie is a must for comfort doing the work, I have a 64 Crew Cab on one now and being able to rotate at will with one hand is a must, I can raise the rotisserie to rotate 360 degrees but i don't find it as comfortable as a little lower and rotate side to side. Of course, I am old and worn out myself.
Hi I stopped when I saw you cutting your new windshield seal , I had just put in my new glass with a new seal, i had a leak, i just pulled the glass out in reverse order minus the rope, came right out. Now back to the vlog! it must be awesome working on a rotesery! I cant beleive how you flip it and drag it all by your self! Nice repair on the frame rail, cant wait to see how that Subi goes in! Im still amazed how you did the harness, genius !!
Great work, i like you vids, just got me a 75 buss with 90.000 km on it. Luckily the frame and undercarriage is not so bad, but ofcourse lower parts of a lot of the bus is in need of work ... So thank you for informative videos.. and happy camping. Hakan in Sweden
I have a 63 split window and did pretty much everything you have done on your bus, probably even more ! lol. one suggestion for your bus I would recommend spending a few hundred dollars to sand blast the entire under bus, it will be like new and make your job so much easier, after all the work you have done why not finish it with a presitine finish? way easier now than later
Looking good 🎉 that same cross member is dented in on my bus as well but I am just leaving it for now. It’s not too bad. High centered on a boulder. My heater boxes were dented and ripped open but I patched those. The po must have been off roading🎉
Every time I see your rotisserie I want to make one for myself. Too bad I installed a roof rack on my 73 today, and had to modify it to not have rails or else it would not fit in the garage. This means I also discovered I do not currently have the space to use a rotisserie 😥
👌Hey buddy, you've come a long way, great to see this bay taking shape, lovely to see you not using weld through primers, thus having no issues with your welding quality, primers and rust preventers can be applied later, well done buddy..
Hi great videos, I know it's been done before with water cooled converted bay window buses, but have you considered front mounting the radiator in a 4x4 spare wheel carrier, in a wheel shaped frame and grill panel. much better cooling, and not out of place on most vw combi's and buses.
The Spiderwoman, Spiderman interlude is fire ! Thanks for your work ! I'm also restoring my old rusty Westy Bay, but my welding technique is sub optimal... but I try
It's coming along great!! As a suggestion before you remove it from rotisserie, after you paint the underside, get some eastwood internal frame coating (it has rust converting components) and coat inside those frame rails. Then, get body cavity wax, and coat the inside again over the eastwood product. It will just be additional rust prevention for the future. There are a bunch of YT channels that have restored vehicles and used both. Your welding has really improved. Can't wait to see it running and driving with the subi engine.
Great video. Again. Excellent choice and use of power tools. And comments: not too much babbling but always useful info on the proceedings. Enjoyed watching this one. Keep making them. ❤
Hello! Greetings from Brazil. There is no need to cut the rubber on the windshield. From inside the vehicle you can release the windshield and push the rubber. And repurposing it, unless it's really old, which doesn't seem to be the case.
Where did you get your full sliding door lower channel? I’ve been looking everywhere and feel like I can’t find all of the pieces. I need the complete channel.
I think i bought the wrong angle grinder. You can hold yours with one hand.. mine is too big for one hand and its really powerful as well, the kickback.. wow haha.
That bit with the windscreen was a heart stopper 😅👍🏻🏴
It’s worrying how now much I missed these vids at the weekend 😊
All I can say is WOW!! your work is inspiring. All the best from Port Lincoln South Australia
Subaru motor will transform your van , I put a 2.5 sohc engine and reversed 5 Spd in my t3 , made it so much fun !!
I'm love the vids, as an chair taker of a bay myself I enjoy watching this with a beer in hand, an not out there fixing stuff
Great video. Truly... you are now a fearless metal working monster!!!!
Great work! As the owner of a rusty , water cooled converted '73, this will help me when the time comes. As far as that radiator goes, use the biggest fucking radiator you can fit it there! You'll be glad you did when your climbing a hill on a hot day in the summer, far from home!
OK hooked, binge watched all 63 episodes in 2 days and you have given me the inspiration to tackle Ugly Betty (my 69 bus). Great work and it's amazing to see how you have grown in confidence with everything you do.
I appreciate the way in which you try to replicate the original factory appearance of your repairs.
You’re welding skills are top notch
The bus looks great
Since my tintop doesn’t have the popup I have a kids cot I’d like to send you it’s in great condition kinda a bus warming gift
A rotisserie is a must for comfort doing the work, I have a 64 Crew Cab on one now and being able to rotate at will with one hand is a must, I can raise the rotisserie to rotate 360 degrees but i don't find it as comfortable as a little lower and rotate side to side. Of course, I am old and worn out myself.
Thanks for all your videos and 'How tos' they have really given me the confidence to take on my T2 kombi.
Hi I stopped when I saw you cutting your new windshield seal , I had just put in my new glass with a new seal, i had a leak, i just pulled the glass out in reverse order minus the rope, came right out. Now back to the vlog! it must be awesome working on a rotesery! I cant beleive how you flip it and drag it all by your self! Nice repair on the frame rail, cant wait to see how that Subi goes in! Im still amazed how you did the harness, genius !!
Good job!
Love your work I never bothered to grind down but show car isn’t my thing just have to admire your work it’s geat
Great video! love seeing you do the work first! keep up the good work!
Great work, i like you vids, just got me a 75 buss with 90.000 km on it. Luckily the frame and undercarriage is not so bad, but ofcourse lower parts of a lot of the bus is in need of work ...
So thank you for informative videos.. and happy camping.
Hakan in Sweden
Muito bom ver mais um exemplar desse clássico Volkswagen, querido em muitos países sendo restaurado. Saudações do Brasil!
This is awesome. I'm very impressed and motivated Paul from Zambia.
great job Kris, great video, love n peace from Scotland
great progress mate, get a air chisel they work insane to remove the spot welds ;)
Been looking out for a new video! Awesome work as usual, and entertaining too. 🤙
Awesome
Repair work. 15:35
Amazing skills. Love how you work everything out. You have become an real pro!
I have a 63 split window and did pretty much everything you have done on your bus, probably even more ! lol. one suggestion for your bus I would recommend spending a few hundred dollars to sand blast the entire under bus, it will be like new and make your job so much easier, after all the work you have done why not finish it with a presitine finish? way easier now than later
Very nice,your getting closer and closer in your quest to build the perfect bus.just keep putting out great videos.great video 👍👍👍😎😎😎
Looking good 🎉 that same cross member is dented in on my bus as well but I am just leaving it for now. It’s not too bad. High centered on a boulder. My heater boxes were dented and ripped open but I patched those. The po must have been off roading🎉
Every time I see your rotisserie I want to make one for myself. Too bad I installed a roof rack on my 73 today, and had to modify it to not have rails or else it would not fit in the garage. This means I also discovered I do not currently have the space to use a rotisserie 😥
👌Hey buddy, you've come a long way, great to see this bay taking shape, lovely to see you not using weld through primers, thus having no issues with your welding quality, primers and rust preventers can be applied later, well done buddy..
Hi great videos, I know it's been done before with water cooled converted bay window buses, but have you considered front mounting the radiator in a 4x4 spare wheel carrier, in a wheel shaped frame and grill panel. much better cooling, and not out of place on most vw combi's and buses.
The Spiderwoman, Spiderman interlude is fire ! Thanks for your work !
I'm also restoring my old rusty Westy Bay, but my welding technique is sub optimal... but I try
Keep practicing!
Solid work! Your welds are looking mint now!
THANK YOU FOR SHARING, REALLY GOOD CONTENT...
Another great video. Also, Sorry I missed you guys yesterday 👍
Very good job !!!
spidy costume is a great twist!
It's coming along great!! As a suggestion before you remove it from rotisserie, after you paint the underside, get some eastwood internal frame coating (it has rust converting components) and coat inside those frame rails. Then, get body cavity wax, and coat the inside again over the eastwood product. It will just be additional rust prevention for the future. There are a bunch of YT channels that have restored vehicles and used both. Your welding has really improved. Can't wait to see it running and driving with the subi engine.
Great video. Again. Excellent choice and use of power tools. And comments: not too much babbling but always useful info on the proceedings. Enjoyed watching this one. Keep making them. ❤
Wow you've taken a major jump up in camera quality! Looks gr8 m8! Bus is looking real nice too. Keep on keepn on man!
looking great!!!
Hello! Greetings from Brazil. There is no need to cut the rubber on the windshield. From inside the vehicle you can release the windshield and push the rubber. And repurposing it, unless it's really old, which doesn't seem to be the case.
Great job as always and the editing is getting more professional all the time 👍
I really enjoy your videos
More great work! Wish I could watch the livestreams more often but the timezone changes just don’t line up
Love the episode! Great work and nice editing :)
Try some of the Eastwoods internal frame coating….worked great on my Ghia
Great work mate.
Dope!!!!!!
素晴らしいですね！
Trabalho de qualidade muito bom parabéns
Are you done posting videos, I would have liked to have seen it finished.
New episode coming out on Wednesday. Tangy will be finished this year!
Haven't heard from you guys in over a month should I keep subscription?
New Episode going up Wednesday starting the new years strong :)
@@Vangabonders glad to hear I do enjoy your channel
Not the Spiderman multiverse I was expecting.
Where did you get your full sliding door lower channel? I’ve been looking everywhere and feel like I can’t find all of the pieces. I need the complete channel.
I think i bought the wrong angle grinder. You can hold yours with one hand.. mine is too big for one hand and its really powerful as well, the kickback.. wow haha.
Leave a connent
why sometimes you are using paint stripper but in some of cases not?
🤗👍👌❣️💯
When your name is pronounced 90% correctly : )
You don't have to cut the windscreen rubber to remove the glass!!
That's not a rotisserie, a rotisserie rotates around a central axis, you have a rollover jig, that (as the name suggests!!) rolls over......😁
aw, hell, i've caught up to the present. welp.
New episodes coming out this new year!
First, :D good work
0:18 WTF???
Why...in ...the..name of God did you ruin the windshield sealing?...why!
Again - almost drop the windshield - wow you've got to be more annoying with jokes - "If the glass broke, it would have been quite the spectacle."
Unsubscribed as no video
Feels bad man