I swear I have every tool made to man from Hilti to makita- and that red Chicago electric corded saw zal with the yellow trigger can’t be killed. It’s the best tool harbor freight ever sold.
This is the type of video which I have been waiting for..... You solved many of the problems that I have stuck with. Thank you very very much for your effective ideas
If you is interested in container home plans the best success that i've ever had was by using the Magic Container Plans (just google it) without a doubt the most incredible course that I've followed.
Eron- sure we have all the tools and plasma cutters work fine (and there are lot of great youtbe how-to use plasma cutters videos available)and reusing the cut-outs are a good idea.
As a retired welder I have worked on a lot of containers the less wood you use the better in the long haul, container houses are not that cheap to build, and a lot of counties won't approve, one thing I will pass a long in buying your container watch for auctions have 5 containers on my place for storage the last 2 I bought at Auction 8x40 high wall heavy duty one trip $1500 each so watch for Auctions
You detailed the top and bottom of the window frame, how did you do the sides? Wood up against the raw metal edge? A groove in the frame, or a similar two part sandwich. like the top and bottom?
Yes we do. ua-cam.com/video/ShLFNxTjCo4/v-deo.html and check out this web page for complete information. www.insofast.com/resources/shipping-containers-exterior-window-flashing.html
Sure the wood buck will work for most openings. However a large opening cut into a shipping container changes the overall strength of the structure you may have to add reinforcing to the container. If you are unsure check with a structural engineer.
Brilliant idea of jigsawing the container corrigations. Does the glue/mastik used in the joins help stop condensation on those uninsulated sections, or does the external timber frame act as insulation. Great videos. Is insofast available in Australia.
Flashing is handled here on youtube ua-cam.com/video/ShLFNxTjCo4/v-deo.html and on our website this is a good page: www.insofast.com/resources/shipping-containers-exterior-window-flashing.html
They are available at home stores like Menards and Home Depot fastening-solutions.itwbuildex.com/item/wood-to-metal-self-drilling-screws/-wtm-with-wings-wood-to-metal-self-drilling-screws/1096000-2 fastening-solutions.itwbuildex.com/Asset/buildex_catalog_2019-15-16.pdf
That was done on a table saw. We followed the angles set forth by this diagram. www.insofast.com/wp-content/uploads/Container-Side-Wall-Corrugations.jpg all containers vary slightly so I would suggest test cuts and adjust your saw's angle until you avhieve the fit you desire. Also see this video: ua-cam.com/video/XsBvFi34rik/v-deo.html
Do you not need to first add a steel frame into the cut out section to restore structural integrity to the wall? Then, you can add a wood window box inside the steel frame to support the window. Correct? That's how I've seen it done but everyone has a different method.
Not always. There are a lot of structural considerations when modifying a sea can or a shipping container. Like the size of a cut opening. If you are unsure, we recommend that you consult with a professional structural engineer. InSoFast is a veneer insulation systems and is not designed to carry roof or upper floor loads.
to cut holes in shipping conts.... the steels only 1.5 thick.... just use a skillsaw with a diablo metal cutting blade.... what takes 20 minutes with the grinder takes 20 seconds wit the diablo blade... you get cleaner lines and cuts too.... i know this cause ive done it
@@insofast-continuous-insulation ohhh yeah totally,,, sometimes where the skilly doesn't reach,, grab a grinder, and/or a saber saw... but yup everyones got their own preferred method
hi , i want to find out about those body covers you used to cover the container , may i know the real name and how can i get them shipped to Africa ,thanks
Sorry, at this time we do not ship internationally to individuals. Our suggestion is for you to contact your local container supplier/broker, and ask them to import InSoFast.
@@insofast-continuous-insulation alright , but i'am a contractor and I learn every single day and wanted to introduce it to my customers , im right in Africa Ghana
The board follows the container's contours. I think this is what you are actually asking, www.insofast.com/shipping-containers/shipping-container-r-value-vs-space-comparison-insofast
Start with a quality jig saw with a sharp blade, let the blade do the cutting. Don't let your impatience apply to much pressure forcing the cut. Finally add to that a lot of practice.
There are a lot of good options for windows. We only show one. This video and webpage may be of some interest. www.insofast.com/resources/shipping-containers-exterior-window-flashing.html
Great Job You Guys. Thanks for the Idea. Can you tell me what type of insulation you've installed in the latter bit of the video. :-) And yes i think that all the lady carpenters would like to have " An automatic Corker" :-)
No we did not we used regular "S-P-F" represents spruce-pine-fir. You can or you can use western cedar or "P-T" pressure treated lumber. I prefer not to use "PT"
You will have to find a local supplier they are Grey Spex, ITW Buildex (1094056) here is a link to a national supplier www.fastenal.com/products/details/1132087
I must be missing something, why do people insulate internally robbing themselves of precious space when they could insulate externally and do a thin clad on the inside?
@@insofast-continuous-insulation the all voltage with a PT51 torch as the consumables are inexpensive. I have been using these industrially for decades, one on every welding station. IGBT MiG welder 110/220 with 100% CO2 for the sewing machine and the cut 50 plasma cutter for the scissors
translate.google.com/ Tenemos problemas para responder a sus preguntas, pruebe el traductor de Google. y envíenos un correo electrónico a info@insofast.com
Rebecca, go with a Bio-Digester! Those can be above ground, plus gives you fertilized tea for other plant’s usage! If you didn’t want to use a company’s Bio-Digester, then make your own using a long downhill run of PVC pipes from your commode, running into a dual, short(6-8” high) flat structures/tanks/vessels that‘ll hold liquids and solids, and add more piping to the opposite end, for overfill runoff! It’s kinda like an above-ground septic tank system! If placed in an area that is cordoned off from any usage, you can cover it up with some soil and plant low ground cover plants for aesthetics! Just don’t ever walk on top of it, or place anything on top that could puncture it!
We don't recommend using pressure treated lumber for container window bucks. PTL is toxic and by building codes is only allowed to be used in damp environments like a concrete basement.
Cool but white pine will last about 15 mins before it rots. Shouldn't you be using something that will last as long as the container? Some sort of composite wood? Looks like a good technique but the longevity of the white wood worries me.
Sure all those tools would be nice and there are resources on the web that will show you how to use them. We are generally trying to show you a method of framing and insulating the interior of a shipping container.
We are not a fan of treated lumber it is toxic and corrosive. With good detailing you don't need pressure treated lumber. ua-cam.com/users/shortseEI7FzjSLu0
Keep on trying to make a home out of something not meant to be a home, the condensation from these things is astronomical its just a matter of time before you see streams coming out of your walls.DONT DENY IT IVE SEEN THIS FOR MYSELF
Flashing is handled here. ua-cam.com/video/ShLFNxTjCo4/v-deo.html There is a building code health concern with "PT" (pressure treated) lumber is toxic; it should never be used in an interior living space. The code exceptions are basements or other damp concrete to wood connection. Exterior decks are fine.
although they did a good job, this is wrong. I would never do it this way. Sandwiching the steel with lumber is wrong. There is no need for that. With that style you create a window ledge on the outside of the container with wood exposed to the elements. water and debris will collect on ledge. No angle on lower frame ledge so water and snow can run off. Having to constantly paint and protect outside frame is not necessary Just make a wood frame but only on the inside of the opening.
Your statement and opinion is from a single point of view and time. Like watching the first quarter of football game and predicting who is going to win. You may want to reserve your judgement, later in the process we insulate the exterior of the container and properly flash of the window opening. ua-cam.com/video/ShLFNxTjCo4/v-deo.html
This is by FAR the best video I've seen on installing a window frame for a shipping container - I love it!
Thank you Chuck.
The best tips I've seen so far on how to cut a window! Keep posting. Thank you.
Glad it was helpful!
That was very detailed, love it.
I swear I have every tool made to man from Hilti to makita- and that red Chicago electric corded saw zal with the yellow trigger can’t be killed. It’s the best tool harbor freight ever sold.
Thanks for the tool review.
Love the way you did those window frames 👍 best method I’ve ever seen. Fantastic tutorial. That insulation is amazing, wish we had it in New Zealand.
Thanks
By far the best container window frame installation I've seen thus far. I will definitely do this for my project. Awesome work. Thank you 👌
Absolutely you are welcome thank you for the compliment.
This is the type of video which I have been waiting for.....
You solved many of the problems that I have stuck with.
Thank you very very much for your effective ideas
If you is interested in container home plans the best success that i've ever had was by using the Magic Container Plans (just google it) without a doubt the most incredible course that I've followed.
You are welcome
Best video I’ve seen to frame a window
Thank you
Have you tried a plasma cutter to cut the opening? Keep the cutouts and make shutters.
Eron- sure we have all the tools and plasma cutters work fine (and there are lot of great youtbe how-to use plasma cutters videos available)and reusing the cut-outs are a good idea.
Amazing video 🎉 Thank you so much I do have a question the wood used for framing is it treated wood or untreated?
The wood in this video was untreated, however you can go either way.
Thank you so much! Great tutorial. Best I have seen on UA-cam.
Thank you
Wow, very cool indeed!! I want to do this on our new (new too us at least) 45' container. Thank you for the idea!! We really need a window!!
Glad it was helpful!
This video saved my project sir.... Thanks 👍
Great to hear glad we could help.
Great idea sir. What type of blade did you use in the jigsaw? It looks like a pretty square cut that you were able to achieve on the curves.
Thank you
As a retired welder I have worked on a lot of containers the less wood you use the better in the long haul, container houses are not that cheap to build, and a lot of counties won't approve, one thing I will pass a long in buying your container watch for auctions have 5 containers on my place for storage the last 2 I bought at Auction 8x40 high wall heavy duty one trip $1500 each so watch for Auctions
What type of auctions....? The problem with those is would you have to transport your container you bought?
Good idea.
sir u did it so simply i am planning to build my home with shipping containers do provide ur valuable advice i have no experience
Great good luck.
Hi. Who came up with the idea to make the window framing out of wood to fit the corrugations? Love it! That's cheap and smart!
Wow thank you Jeff I missed your comment.
I’ve been looking for a vid like this; we own 2 containers.
Metal circular saw is the best tool for the main cuts.
Excellent info and demonstrations for when I build my shipping home!
Thank-you please tell everyone you know;)
your video is the most helpful one on this subject! thank you!
Thank you.
I agree! Can’t wait to do this myself!
Man I really like how you traced the ridges with the wood. That was good thinking. Thx 4 tha vid buddy
Thank you for the feed back.
You detailed the top and bottom of the window frame, how did you do the sides? Wood up against the raw metal edge? A groove in the frame, or a similar two part sandwich. like the top and bottom?
We cut (or split) the vertical window jambs in half and essentially made 2 complete frames an interior and an exterior "window buck."
Is there any advantage to welding in a metal frame vs this glued-n-screwed wooden frame?
Medium Ed : I will say the wooden frame will reduce the thermal bridging. But will have to see the detail on the connection window to window frame.
Yes the less wood you use the better
Do you have a video on installing the window after creating the wood bucks? I want to know where you place the actual window.
Yes we do. ua-cam.com/video/ShLFNxTjCo4/v-deo.html and check out this web page for complete information. www.insofast.com/resources/shipping-containers-exterior-window-flashing.html
Do you think treated lumber would work? I’m wondering if it could corrode the metal of the container.
I am not a fan of treated lumber it is toxic and corrosive. With good detailing you don't need it. ua-cam.com/users/shortseEI7FzjSLu0
Use LSOP which is treated and non toxic. It also won't corroded the metal.
Great! Can the same approach be applied to make an opening for a door (or a set of double doors)?
Sure the wood buck will work for most openings. However a large opening cut into a shipping container changes the overall strength of the structure you may have to add reinforcing to the container. If you are unsure check with a structural engineer.
That was pretty awesome , where did you get the T&G foam insulation???
www.insofast.com/
Brilliant idea of jigsawing the container corrigations. Does the glue/mastik used in the joins help stop condensation on those uninsulated sections, or does the external timber frame act as insulation. Great videos.
Is insofast available in Australia.
Yes it does and it is not available in Australia. I would contact your local shipping container supplier and ask them to import InSoFast.
how will you flash the window on the exterior? how will you keep the wood frame dry?
Flashing is handled here on youtube ua-cam.com/video/ShLFNxTjCo4/v-deo.html and on our website this is a good page: www.insofast.com/resources/shipping-containers-exterior-window-flashing.html
I can't imagine a more helpful video.
Thank you
Great idea .
Thanks
Great idea!
Thank you Norm
please can you avail us the direct link to the winged tip nails? awesome video!!!
They are available at home stores like Menards and Home Depot fastening-solutions.itwbuildex.com/item/wood-to-metal-self-drilling-screws/-wtm-with-wings-wood-to-metal-self-drilling-screws/1096000-2
fastening-solutions.itwbuildex.com/Asset/buildex_catalog_2019-15-16.pdf
have a question, how is the window outside, why don't they show this side?
Sure go to this page on the website: www.insofast.com/resources/shipping-containers-exterior-window-flashing.html
Awesome job, how did you mark and cut out the left and right upright lumber?
That was done on a table saw. We followed the angles set forth by this diagram. www.insofast.com/wp-content/uploads/Container-Side-Wall-Corrugations.jpg all containers vary slightly so I would suggest test cuts and adjust your saw's angle until you avhieve the fit you desire. Also see this video: ua-cam.com/video/XsBvFi34rik/v-deo.html
Wow! Thank you
Nice and solid!
Should have painted the wood first?
Ok That's a good option.
Do you not need to first add a steel frame into the cut out section to restore structural integrity to the wall? Then, you can add a wood window box inside the steel frame to support the window. Correct? That's how I've seen it done but everyone has a different method.
Not always. There are a lot of structural considerations when modifying a sea can or a shipping container. Like the size of a cut opening. If you are unsure, we recommend that you consult with a professional structural engineer. InSoFast is a veneer insulation systems and is not designed to carry roof or upper floor loads.
Why didnt you use treated lumber
to cut holes in shipping conts.... the steels only 1.5 thick.... just use a skillsaw with a diablo metal cutting blade.... what takes 20 minutes with the grinder takes 20 seconds wit the diablo blade... you get cleaner lines and cuts too.... i know this cause ive done it
Sounds good to me. I think it is important to do what works for you...We just show a method.
@@insofast-continuous-insulation ohhh yeah totally,,, sometimes where the skilly doesn't reach,, grab a grinder, and/or a saber saw... but yup everyones got their own preferred method
hi , i want to find out about those body covers you used to cover the container , may i know the real name and how can i get them shipped to Africa ,thanks
Sorry, at this time we do not ship internationally to individuals. Our suggestion is for you to contact your local container supplier/broker, and ask them to import InSoFast.
@@insofast-continuous-insulation alright , but i'am a contractor and I learn every single day and wanted to introduce it to my customers , im right in Africa Ghana
Interesting. Been thinking about building a shipping container for an office
What is holding you back?
That showed exactly what I needed to know, thank you.
Thank you it is nice to know, that we showed you what you need to know....you know we never know unless someone tells us. ;) 👍
what is the thickness of the boards you used?
The board follows the container's contours. I think this is what you are actually asking, www.insofast.com/shipping-containers/shipping-container-r-value-vs-space-comparison-insofast
Was that form a 2x4 or 2x6
The form was a 2x6 we insulated the interior and exterior of this container. A 2x4 would work if you only insulate one surface.
Awesome job, the project your working on, is it for personal living or a weekend type of home?
Weekend type home in South Dakota.
don't have this but am very interested in purchasing ...
insofast.com
really like the ideas you folks are putting out....
Thank-you
how do you avoid drift when using your jigsaw with 2x6 lumber? what cutting blade did you use?
Start with a quality jig saw with a sharp blade, let the blade do the cutting. Don't let your impatience apply to much pressure forcing the cut. Finally add to that a lot of practice.
I was wondering how to do windows. I was thinking maybe weld a metal frame above and below the window.
There are a lot of good options for windows. We only show one. This video and webpage may be of some interest. www.insofast.com/resources/shipping-containers-exterior-window-flashing.html
which glue did you use?
Loctite PL Premium
Love your work
Thank you.
Great Job You Guys. Thanks for the Idea. Can you tell me what type of insulation you've installed in the latter bit of the video. :-) And yes i think that all the lady carpenters would like to have " An automatic Corker" :-)
Expanded Polystyrene
thumbs up😊
:)
i like that because you don't have to weld
Welding can be difficult.
Very well done, but next time; use plastic lumber.
did you use treated lumber?
No we did not we used regular "S-P-F" represents spruce-pine-fir. You can or you can use western cedar or "P-T" pressure treated lumber. I prefer not to use "PT"
We’re you buy those sheet metal screws?
You will have to find a local supplier they are Grey Spex, ITW Buildex (1094056) here is a link to a national supplier www.fastenal.com/products/details/1132087
This is very well!
Thank you
Genius
:)
Hello, I've Like to have a conteiners house Like this, I Live in dominican repúblic, what I must to do,? I want contact to you.
info@insofast.com
I must be missing something, why do people insulate internally robbing themselves of precious space when they could insulate externally and do a thin clad on the inside?
Good question, may be they don't want to see wires and plumbing services exposed to the interior space. We have methods to do exterior insulation too.
💯
Thank you
thank you so much !!!!!
Thank you for the comment.
Y'all need to start using plasma cutters
They are quite cheap
Good call...any specific products you'd recommend?
@@insofast-continuous-insulation the all voltage with a PT51 torch as the consumables are inexpensive.
I have been using these industrially for decades, one on every welding station. IGBT MiG welder 110/220 with 100% CO2 for the sewing machine and the cut 50 plasma cutter for the scissors
Yo quiero meterme en el proyeto como lo ago
translate.google.com/ Tenemos problemas para responder a sus preguntas, pruebe el traductor de Google. y envíenos un correo electrónico a info@insofast.com
We need sewer tanks system,we call them ( separate tanks)that drains into the ground for Liberia.
Rebecca we only sell insulation panels. Good luck on your quest. Maybe another viewer will point you in the right direction.
Rebecca, go with a Bio-Digester! Those can be above ground, plus gives you fertilized tea for other plant’s usage! If you didn’t want to use a company’s Bio-Digester, then make your own using a long downhill run of PVC pipes from your commode, running into a dual, short(6-8” high) flat structures/tanks/vessels that‘ll hold liquids and solids, and add more piping to the opposite end, for overfill runoff! It’s kinda like an above-ground septic tank system! If placed in an area that is cordoned off from any usage, you can cover it up with some soil and plant low ground cover plants for aesthetics! Just don’t ever walk on top of it, or place anything on top that could puncture it!
Window reveal install
We have another video for window installs and flashings coming out soon!
Polfavor espriqueme mus chasias espero su repuesta
No tengo idea de lo que estás preguntando, "chasis" no se traduce bien. Vendemos paneles aislantes.
Now if this was an exterior building I would recommend Pressure Treated...
We don't recommend using pressure treated lumber for container window bucks. PTL is toxic and by building codes is only allowed to be used in damp environments like a concrete basement.
Si good
Thank you
Cool but white pine will last about 15 mins before it rots. Shouldn't you be using something that will last as long as the container? Some sort of composite wood? Looks like a good technique but the longevity of the white wood worries me.
Composite wood would work fine. Thanks for the suggestion.
Plasma cutter.. cobalt drill bits.. and a welder....
Sure all those tools would be nice and there are resources on the web that will show you how to use them. We are generally trying to show you a method of framing and insulating the interior of a shipping container.
👏👏👏👏👍
Thank you Thank you Thank you
We are not a fan of treated lumber it is toxic and corrosive. With good detailing you don't need pressure treated lumber. ua-cam.com/users/shortseEI7FzjSLu0
Keep on trying to make a home out of something not meant to be a home, the condensation from these things is astronomical its just a matter of time before you see streams coming out of your walls.DONT DENY IT IVE SEEN THIS FOR MYSELF
DISCERNMENT FILES they did not use PT lumber and no discussion about window flashing.
Flashing is handled here. ua-cam.com/video/ShLFNxTjCo4/v-deo.html There is a building code health concern with "PT" (pressure treated) lumber is toxic; it should never be used in an interior living space. The code exceptions are basements or other damp concrete to wood connection. Exterior decks are fine.
although they did a good job, this is wrong. I would never do it this way. Sandwiching the steel with lumber is wrong. There is no need for that. With that style you create a window ledge on the outside of the container with wood exposed to the elements. water and debris will collect on ledge. No angle on lower frame ledge so water and snow can run off. Having to constantly paint and protect outside frame is not necessary Just make a wood frame but only on the inside of the opening.
Your statement and opinion is from a single point of view and time. Like watching the first quarter of football game and predicting who is going to win. You may want to reserve your judgement, later in the process we insulate the exterior of the container and properly flash of the window opening. ua-cam.com/video/ShLFNxTjCo4/v-deo.html