OMC Cobra Volvo Penta SX 4 Blade PowerTech Prop Upgrade
Вставка
- Опубліковано 29 сер 2024
- So I wanted to explore ways to get bow down quicker, while also gaining some torque. I went to my friends at Nettle Props and asked for a 4 blade upgrade. I can definitely tell a difference. I went from a 19 to a 17 pitch. Also note this one is Stainless Steel. www.nettleprops...
Manual says put the Remote into forward to lock system, and reverse when tightening. 2x4 no matter the placement isn't the best method. but to each his own.
Sweet! Thanks. I'll try that out here in a few months and I'll update everyone on how that works out for me.
i had trouble finding the correct thrust washer ,and i found other people with the same problem , what it was that SEI when they rebuild the lower unit ,went with a larger shaft , so i used 126870 thurst washer
Micheal, this is Bryan. I've never seen the 2 x 4 braced against the skeg. I don't think the skeg is that strong. We've always placed the board between the prop and the cavitation plate. Just saying.
Been thinking about this comment. The OMC Cobra for sure can handle the 80 ft. lbs on the skeg. The Volvo Penta seemed a little iffy, but it handled it. The Volvo in this video had the skeg ripped off already and new material, tig welded and it still seemed to hold up well. If someone reading this has a skeggard, meaning part of their skeg is missing, definitely don't use the skeg to tighten the prop.
Vvv vv vvv v. V. V v v 😊😊😊😊😊😅😊😊😊😊😊😊😊😊😊😊😊😊0😊😊😊😊😊😅 1:21 1:21 😅😅
Thanks for videos , really usefull. Got a question on props. I have OMC cobra with SX drive and original prop 14,25x21 aluminium 3 blade on a Fourwinns horizon 190 1994. Getting out of water pretty quick but even with trim down the nose still high. Does the 4 blades will help ? Also i must run above 3500 rpm to stay out of water. I think its alot and also engine still got alot of power between 4k and 5k rpm. So is it a good idea to get a 23 or 25 pitch instead of 21 ? Thanks i dont want to speed 800$ on a prop and be disapointed 😉 forgot to say that im often towing 2 tubes with 3-4 kids on it. With the 21 i have alot of power but wondering how the 5.0l 190hp will handle it with a 23 or 25 pitch prop.
Before you consider switching props, I think you need to buy the product and follow the procedure I outline in this video. ua-cam.com/video/MyZiIegB_DU/v-deo.html
So did this prop work out ok, was it a 5.0 orthe 5.8 ?
Link to how the $ Blade Powertech and the Hydrofoil add turned out please
Have no idea why you would put gasket maker on those parts and not marine grease
Good call out- I pull mine off every 6 month or 100 hours. I'll apply OMC Triple Guard
grease next time, just for you.
So how did the prop perform compared to the aluminium one?
Is your Penta 5.0 or 5.7?
It will get on a plane really fast. It launches it out of the water really way better than a 3 blade aluminum!
How about cruise and top speed performance? I have a 23' walkaround with a 5.0 and Volvo Cobra SX leg I'm wondering if I can improve my cruise and top speed with an SS prop over the original 4 blade alloy prop I have on it now....... any input appreciated!
There is a recommendation in my VP Shop Manual that the carrier bearing anode needs removal and clearance checked when installing a SS prop. Did you need to do that?
Hey Ray! Great call out. Thanks for subscribing! You reminded me about a very important video I need to make. To answer you question, yes! I have checked it and notice it was still in great shape.
My thrust washer is also stuck, what are some strategies to remove it without a puller? Also, are you still happy with the 4 blade prop?
Nice video
Thanks!
I have a 1989 Beretta OMC cobra ford 351, having problems getting on plane, one day gets fight up next day doesn't, I have checked engine compression all good, do you think could be ESA problem?
Are you carrying people when you noticed this issue getting on plane?
@@michaelromer2016
@@michaelromer2016 Every time yes also noticed when not getting on plane we are only at 2500 RPM when on plane much higher
Mystic Waterproof Marine Grease...
About what size 3 blade would you except a 5.7 omc cobra on a 87 larson dc 250 sport cruiser to use?
Use this solaspropellers.com/index.php/products/prop-finder
@@michaelromer2016 it cant estimate a prop for my engine
15-1/2 X 14 SS
@@michaelromer2016 thanks. What speeds do you think this boat should max at?
why would you put gasket compound in there?
It makes the prop come off a little easier.
You never did a follow up video did you? :(
I'll get to it in a month. The difference between 3 vs. 4 blades are night and day different. On the water, I noticed the boat getting on a plane, almost instantly. Responsiveness, is also a strong point with this one. Keep in mind, they are a little pricey, but if you ever decide to sell your boat, keep the box, and both props. This will hold it's value.
i have a question what gearing is your lower
mine is a 1.60 how did the 4 blade work out for you
1.66
The prop is great. If you are use to 3 blade, the extra blade gets you up on a plane really fast. Responsiveness is great too.
Can't find the post review, did you end up doing one?
Thanks for your comment! I'm still working on that one. Here are some quick updates: Time to plane is greatly improved. Turning is so much better! Reversing seems to be the only item which isn't night and day better. Don't forget to subscribe. I'll have that video soon!
It's been 7 months, get a grip..... sorry, don't say you'll do a follow up and then months later say you are still working on it. Sorry for being a jerk but bad mood and there aren't many videos on this drive and i'm trying to soak every one i can find.... stay afloat guys and gals 😊
What are the factory prop specs of your boat?
15x17
Use this solaspropellers.com/index.php/products/prop-finder
Long store short. To late . Get on with it
Subscribe! I get that a lot.
If only he knew how to bend a cotter pin...!
@@michaelromer2016 Still isn't properly installed... Your Dad should have taught you better...! Go watch the Yamaha video on installing a prop and educate yourself...!
@@michaelromer2016 Two years later so would a finishing nail...!
@@michaelromer2016 Well then go learn from Yamaha like I told you to...
William Riley do me a favor and subscribe.