Easyzone Plenum: Assembly
Вставка
- Опубліковано 28 сер 2024
- To assemble the indoor unit:
1. Locate the drilling holes. If they are covered, use a screwdriver to uncover them to fix the Easyzone to the AC unit.
2. Place the plenum over the AC unit's supply vent and fix it using the screws.
3. After tightening the screws, make sure the connection neck is insulated to prevent the formation of condensation. Use strips of 25 mm thick insulation material (glass wool or polyethylene foam).
4. Lastly, use threaded rods to fix the Easyzone plenum to the ceiling through the tabs found at each end.
To connect the outside air supply:
1. Remove the fixed elliptical neck by undoing the screws.
2. Remove the protective plate that covers the outside air intake and reattach the elliptical neck.
3. Bend or cut the cover found in the lower part of the supply dampers to allow the air to pass through.
Lastly, connect the insulated duct to the dampers. Ensure that the ducts are properly extended, with no folds, to avoid increased load losses.
It is important to remember that all ducted air conditioning units currently on the market provide greater air flow in the central zones of the plenum; therefore the largest zones in the installation should be associated with the plenum's central dampers.
*Great product **Fastly.Cool** so far*
,
I was in a car accident in my youth and they had to remove my pleenum - I have to be careful about not catching a cold to this day.
The good old pleenum!!!
lol sounds like spleen
Damn, I've been saying 'plenum' wrong for ever
I thought if its in a conditioned room that the minisplit and plenum doesn't have to be insulated
Pleeeeenum?
No gloves ?
Is this product available in Australia ?
I just want to know what's pleeeenum is. Hahaa
do you make custom plenums?
Hi! Thank you for the intereste in our products. Easyzone is standardized to our manufacturing processes. We do not manufacture customized motorized plenums. Nevertheless, we can find a solution for your need within our portfolio.
Please, get in contact with us through www.airzonecontrol.com and we will support you with your needs.
Best regards.
air handler models that this fits?
That’s an exhaust not intake right?
The velocity of the air passing through zone barrels should work as a vacuum for out side , but as i see it you have to many zones open will create static pressure - then it will turn into a air dump. fresh air i usually install via a secondary filter on the return box