Gleam Giveaway: gleam.io/ysJHA/super-mega-flush-trim-bit-giveaway BitsBits is the BEST place to buy router bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off (sorry I say 20% in the video) Get the FREE Shelf Template and the Katz-Moses Magnetic Dovetail Jig here: goo.gl/XzEmMa
So, you've proven that you're human by showing your mistakes and how to fix them! Great video as always. I need to do this because I've just been storing them randomly in drawers and then forget what drawer they are in...
What a fantastic case, with a bit of re-work could be good for drill bits and all sorts of ideas, thank you. I have always fancied using those heavy magnets for latching, but weary of how far to put them inside to make sure they hold fast, I am sure a nice brass latch would look great too.
As a beginner getting ready to dive into getting my shop set up to start working on projects, i must say i really appreciate the fact that you bring to our attention that mistakes are made even to the most experienced of woodworkers. it truly shows your character!!! kudos to you sir!! you've earned a subscriber.
Your "let's get to do some sanding... yay." perfectly describes how I feel about sanding too lol. This and the Japanese water stone project are definitely my two new favorites. Thanks for the videos!
Love the way you show us the mistakes you make. It shows how we can fix ours without wasting a whole piece. Hope you will continue with this. The cabinet looks great, will have to try it.
The glass alone looks killer but man that whole case looks incredible. Great job Johnathan. I think it’s great to see UA-cam makers showing their mistakes and how they fix them. Very nice to see that as hard as it can be to admit that there were mistakes made.
The coolest thing about your videos is hope for us beginner woodworkers especially when it comes to making mistakes! I'm attempting to make my first jewelry box for my mom right now out of Cherry and Quilted Maple.. This will be a first for me, but at least I got the hand cut dovetail process down thanks to my semester in the Katz Moses School of Dovetails!
That glass engraving bit is amazing! Thank you for sharing. The Whiteside ultimate flush trim bit is also great. I wish Whiteside would make a smaller version with a quarter inch shank.
Beautiful build, thank you for sharing! I really appreciate all your hard work. Your videos are both informative and entertaining. I’m a trim and cabinet installer for my living, and woodworking is also a hobby for me. Your videos help me in both my professional work, and in my spare time. I cut my first dovetail by hand after being inspired by you, and that makes me want to give a huge THANK YOU to you! Admittedly I need some more practice, but that sounds like a great excuse for me to play in my shop. I can’t say it enough, so thanks again!
Him my name is Bryan, and I am a router bit addict. It'a been 12 days since my last buy! Great looking cabinet and storage solution. And not truer words have ever been said about being able to fix your mistakes. Right on Brother!
Jonathon, I enjoyed this build. Your ending showing the mistakes you made was outstanding. It’s always encouraging when I see others include the mistakes and fixes on their work. Things like that are what sets outstanding craftsmen apart from the rest. I always enjoy your work. Now I’m really jealous after you showed the glass engraving on the CNC.
I’ve done the same thing with a misplaced dado, and also with a misplaced mortise for bed rail hardware. Both I found the best matching wood I could and glued it right in there, it breaks my heart every time I look at the pieces, but i’m the only one that knows; as is the curse of building your own furniture. Thanks for the opportunity to win a bit buddy. I live across the country now cause California was bleeding me dry, but I used to live 30mins from you, wish I would have reached out when I lived over there. Anywho, thanks again man.
This is the first video of yours that I’ve watched and I subscribed immediately. The piece you made is beautiful, I absolutely love it. But more than that I really appreciate you sharing your mistakes at the end. I worked on a blanket chest in the shop for a couple hours and everything was going perfectly until rolled the end of my board on the jointer and lost a nice chunk of it. But my mind went straight to how I could fix it, so when I saw the end of your video it put it big smile on my face. Great work!
Great result. I think your channel is some of the best woodworking content on UA-cam right now. It seem you have definitely found your own style and it's great!
Jonathan, that is a very cool project. I also want to thank you for going over mistakes. It is extremely helpful as I'm a bit of a perfectionist, but can't stand starting over because of something minor.
I will certainly give a try at making this router bit cabinet. Thought I'd pick your brain on an idea. I like the "scary sharp" system from time to time, and you have to buy a piece of float glass and it always seems in danger of breaking in the shop since there's no good place to store it. Do you think it would work out if you put two pieces of glass in the door; a bottom fixed piece, a stile, and a top piece that's float glass that you remove whenever you're going to have sharpening day? I thought, it's a good use of the glass when not sharpening, a safe place to store it and readily available when you want to sharpen chisels and plane irons. What's your thoughts on that?
Jonathan, thx for the end bit about all the mistakes. I’m sitting here watching thinking, God this guy never messes up, how do I get that good? I’m happy to see that even you make mistakes, now I just have to learn how to fix mine better! 😂👍🏻
Really like your channel helpful and informative. Looks like a very useful trim bit. I've used Whiteside bits for years (excellent quality). Just to give you feedback... I bought your dovetail jig a while back. It is a very helpful tool.
Awesome !! Beautiful work !!great video Thank you! Love your Transparency at the end of the video!! A good woodworker knows how to fix his mistakes and move forward,
Wow all those mistakes, hmmm I would be happy to take that case off your hands so you don't have to suffer the heartache every time you look at it. Awesome job man, really love that glass front.
Always love your videos. Your camera and editing style is spot on. Also thank you for pointing out the flaws at the end. Too often we just see the finished product from the perfect angle and it's nice to know we are all have our moments! Just got a CNC and think this might be a good addition to house the ever increasing bit inventory
Seems counter intuitive to think you'd have a chance to use it before I did. That's a prototype. The red pieces came in. Just waiting on the angled ones.
Great looking cabinet fella. Always good to know mistakes are made even by the best! Glass drag but gave an awesome finish... I’d get one, but then I’d need to add the CNC machine to it too!
Great video. That table saw sled and stop block look great. Will you be doing a video on it soon? Time to rebuild mine and thinking about grabbing your stop block.
Beautiful. I'm loving your minimalist finishing approach --lacquer is beautiful... Impressive how it highlights the grain and leaves an awesome finish. Dude... no mask when spraying? Thanks for being an inspiration! Haven't used your jigs yet, but I will... soon! They're on my bench....
That turned out nice. Great work! I was wondering, could you engrave/etch the backside of some glass and go over it with contrasting paint to make it stand out?
Dude!! That case came out kick ass man. I really love the glass etching. I have yet to tackle my first dovetail, but I'm hoping in the near future to buy your jig to make things easier for me. Thanks again for sharing home skillet!
Some of the bits seem to be a bit tall for each shelf, do you think perhaps you should have made them pull out shelf's? Just looks like the ones that get put in the back might be hard to get out/put in. Awesome design though, love it, esp the etched glass. I am just starting to get into routing, so I suspect eventually I'll need some sort of organizer as well. I'll keep this in mind for sure!
I wish I could enter the competition but I only have a 1/4" router and don't use it that much so it's better to go to someone else. That cabnet looks great, even with the odd mistake.
I could see in your shop that you have a lot of really amazing tools in your collection. So why are you still using spray cans rather than a spray gun? Was there a big learning curve when you bought your CNC and do you make your own templates(programs)?
"the way it holds my bits" Hahahahah! Nice work! I love that you shared your mistakes, shows you're human. This is how you learn. You know Veritas makes a miniature router plane that works great for mortising little hinges ; )
That cabinet looks great ! Just a minor remark about it though. How are you going to take out a small bit that is in the back when there are several other placed in front of it. I mean, you glued everything so you can't take the shelf out. I'm not an expert, but i was just wondering about it because i have big hands. And i would have a lot of trouble getting that bit in the back.
I have a chase patio lounge that needs top board replaced. The top board has slats going into the side of it for the back. What bit or how would I cut the slots for the slats to fit into to repair this? Thank you.
Hey Jon, I wonder why you don't use a spray gun to apply the polyurethane to your builds. The spray cans lost pressure so fast, at least from my point of view.
I use lacquer and absolutely hate polyurethane. Lacquer is great stuff for high use applications. I use an HVLP gun on bigger projects but for stuff like this the rattle cans work great. This project used about half of a 6 dollar can.
That turned out great Jonathan, hopefully one day I'll have enough router bits to build a cabinet for them. I must be a really good woodworker because of all the mistakes I have to fix! PS: Thank you for another giveaway.
When you mentioned the mistakes, I put my hands over my ears and, in a very loud voice, said 'NAH NAH NAH NAH' so I couldn't hear it. We do NOT want our illusions shattered!. ;-) It's a beautiful case right down to the glass etching. Most of my bits are in a box that has a large plastic window in the lid which looks cool, but soooo much less cool than your new case.
Just awesome, I really enjoy how you present your craft. I'm new to woodworking and find it very inspiring to see what you make. Thanks for showing us the mistakes you've made along the way. I dont feel so bad for some of the brain farts that I have along the way 😁. Thanks again for everything you're bringing to the craft.
@@katzmosestools will do! I'm stuck right now debating whether to buy a jointer or keep using my Jack plane. As projects become bigger its getting to be a lot more work!
Gleam Giveaway: gleam.io/ysJHA/super-mega-flush-trim-bit-giveaway
BitsBits is the BEST place to buy router bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off (sorry I say 20% in the video)
Get the FREE Shelf Template and the Katz-Moses Magnetic Dovetail Jig here: goo.gl/XzEmMa
I love that you're sharing your mistakes. It is really easy to watch your videos and think that you just do everything so easily. Thanks for sharing!
So, you've proven that you're human by showing your mistakes and how to fix them! Great video as always. I need to do this because I've just been storing them randomly in drawers and then forget what drawer they are in...
I really appreciate you sharing at the end the mistakes you made.
Well done all around
really, its nice to see all make mistakes too, weirdly motivates me more seeing others also mess up here n there BUT most importantly...FIX em
What a fantastic case, with a bit of re-work could be good for drill bits and all sorts of ideas, thank you.
I have always fancied using those heavy magnets for latching, but weary of how far to put them inside to make sure they hold fast, I am sure a nice brass latch would look great too.
As a beginner getting ready to dive into getting my shop set up to start working on projects, i must say i really appreciate the fact that you bring to our attention that mistakes are made even to the most experienced of woodworkers. it truly shows your character!!! kudos to you sir!! you've earned a subscriber.
Welcome my friend!
The patent pending stop block... the card trick... the router angle trick... diamond drag bit... this dude's a pro
Your "let's get to do some sanding... yay." perfectly describes how I feel about sanding too lol. This and the Japanese water stone project are definitely my two new favorites. Thanks for the videos!
Absolutely loved the engraved glass. Your logo adds that little extra personal professionalism to the final piece.
Love the way you show us the mistakes you make. It shows how we can fix ours without wasting a whole piece. Hope you will continue with this. The cabinet looks great, will have to try it.
The glass alone looks killer but man that whole case looks incredible. Great job Johnathan. I think it’s great to see UA-cam makers showing their mistakes and how they fix them. Very nice to see that as hard as it can be to admit that there were mistakes made.
This channel is absolutely amazing. I work with a lot of skilled bamboo carpenters and they love when I show them your videos. They flip out!!
The coolest thing about your videos is hope for us beginner woodworkers especially when it comes to making mistakes! I'm attempting to make my first jewelry box for my mom right now out of Cherry and Quilted Maple.. This will be a first for me, but at least I got the hand cut dovetail process down thanks to my semester in the Katz Moses School of Dovetails!
That's great to hear bud!
It is a joy to watch your videos.
Man you are a Professor!
Respect.
BR,
Oedi
That glass engraving bit is amazing! Thank you for sharing. The Whiteside ultimate flush trim bit is also great. I wish Whiteside would make a smaller version with a quarter inch shank.
Beautiful build, thank you for sharing! I really appreciate all your hard work. Your videos are both informative and entertaining. I’m a trim and cabinet installer for my living, and woodworking is also a hobby for me. Your videos help me in both my professional work, and in my spare time. I cut my first dovetail by hand after being inspired by you, and that makes me want to give a huge THANK YOU to you! Admittedly I need some more practice, but that sounds like a great excuse for me to play in my shop. I can’t say it enough, so thanks again!
Thank you my friend! Go get'em tiger!
Great work and very honest to show the little failures. These are also a lesson for the viewers. Very nice, should've been done more on YT
The Tweety bird bandaid gives you a plus 5 to healing.
Hahahahaha I knew it!
@@katzmosestools no link for the bandaids??? lol
Him my name is Bryan, and I am a router bit addict. It'a been 12 days since my last buy! Great looking cabinet and storage solution. And not truer words have ever been said about being able to fix your mistakes. Right on Brother!
Bitsbits is lucky to have you as a brand advocate. I’ll be looking there next time I need a new bit, which is often since I have a new CNC.
Jonathon, I enjoyed this build. Your ending showing the mistakes you made was outstanding. It’s always encouraging when I see others include the mistakes and fixes on their work. Things like that are what sets outstanding craftsmen apart from the rest. I always enjoy your work. Now I’m really jealous after you showed the glass engraving on the CNC.
I’ve done the same thing with a misplaced dado, and also with a misplaced mortise for bed rail hardware. Both I found the best matching wood I could and glued it right in there, it breaks my heart every time I look at the pieces, but i’m the only one that knows; as is the curse of building your own furniture. Thanks for the opportunity to win a bit buddy. I live across the country now cause California was bleeding me dry, but I used to live 30mins from you, wish I would have reached out when I lived over there. Anywho, thanks again man.
You'll be missed brother!
That cabinet came out beautifully, nice job.
This is the first video of yours that I’ve watched and I subscribed immediately. The piece you made is beautiful, I absolutely love it. But more than that I really appreciate you sharing your mistakes at the end. I worked on a blanket chest in the shop for a couple hours and everything was going perfectly until rolled the end of my board on the jointer and lost a nice chunk of it. But my mind went straight to how I could fix it, so when I saw the end of your video it put it big smile on my face. Great work!
Welcome my friend! Glad to be of service!
Great result. I think your channel is some of the best woodworking content on UA-cam right now. It seem you have definitely found your own style and it's great!
Thanks brother!
Thanks brother!
Jonathan, that is a very cool project. I also want to thank you for going over mistakes. It is extremely helpful as I'm a bit of a perfectionist, but can't stand starting over because of something minor.
impressive. Glad I recently found your channel - just bought a cnc and was looking for a place to get good bits.
"Lets do some sanding. Yay!"
It's s nice to see that we share the same enthusiasm for sanding our projects!
Hahahaha I hate sanding!
I'd love to see you build a tool storage station with tips and tricks to get all your tools in there.
Absolutely a beautiful piece! Thank you for sharing your mistakes and how you fixed them!
Very cool bit holder (and its cherry!), but engraving the class on the CNC, That is nice!
I will certainly give a try at making this router bit cabinet. Thought I'd pick your brain on an idea. I like the "scary sharp" system from time to time, and you have to buy a piece of float glass and it always seems in danger of breaking in the shop since there's no good place to store it. Do you think it would work out if you put two pieces of glass in the door; a bottom fixed piece, a stile, and a top piece that's float glass that you remove whenever you're going to have sharpening day? I thought, it's a good use of the glass when not sharpening, a safe place to store it and readily available when you want to sharpen chisels and plane irons. What's your thoughts on that?
That drag bit was cool
Jonathan, thx for the end bit about all the mistakes. I’m sitting here watching thinking, God this guy never messes up, how do I get that good? I’m happy to see that even you make mistakes, now I just have to learn how to fix mine better! 😂👍🏻
I have a video coming out tomorrow about fixing mistakes. Thanks bud!
Really like your channel helpful and informative. Looks like a very useful trim bit. I've used Whiteside bits for years (excellent quality). Just to give you feedback... I bought your dovetail jig a while back. It is a very helpful tool.
I can't wait to see what you create bud
Loving the glass detail
That turned out beautiful. I could definitely use a nice cabinet like that. Well done
Awesome !! Beautiful work !!great video Thank you! Love your Transparency at the end of the video!! A good woodworker knows how to fix his mistakes and move forward,
Those mega-bits are awesome! Just make sure you honor that max speed!
Wow all those mistakes, hmmm I would be happy to take that case off your hands so you don't have to suffer the heartache every time you look at it. Awesome job man, really love that glass front.
Great job, nice touch with the glass!!
Always love your videos. Your camera and editing style is spot on. Also thank you for pointing out the flaws at the end. Too often we just see the finished product from the perfect angle and it's nice to know we are all have our moments! Just got a CNC and think this might be a good addition to house the ever increasing bit inventory
I see you are using YOUR stop block!Still waiting on mine!!
Seems counter intuitive to think you'd have a chance to use it before I did. That's a prototype. The red pieces came in. Just waiting on the angled ones.
Really enjoyed this one. It came out so nice.
That's awesome. I own hundreds of router bits (some in quantity) but I definitely don't have a bit like the one your giving away.
Love the background music!!!!! Great video Jonathan.
Another top job ..love the channel.. Best wishes from the UK ...
Beautiful build. The glass design is wicked and how it’s done.
Also that router bit is sick.
Really nice. Matt Estlea will be jealous!
Matt is one of the best woodworkers on the Tube. I'm jealous of everything he does hahaha
Jonathan Katz-Moses. He is fantastic, but don’t sell yourself short. Besides, you have better hair! 😁
@@chm1701 hahahahahaha lol
Great looking cabinet fella. Always good to know mistakes are made even by the best! Glass drag but gave an awesome finish... I’d get one, but then I’d need to add the CNC machine to it too!
Omg wish I had been watching you channel during this giveaway. Congrats to the winner! Nice store by the way!
When a Katz-moses video gets released, I thumbs up before watching it 😍
Hahaha thanks brother!
Great video. That table saw sled and stop block look great. Will you be doing a video on it soon? Time to rebuild mine and thinking about grabbing your stop block.
Very soon!
Great looking piece
Beautiful. I'm loving your minimalist finishing approach --lacquer is beautiful... Impressive how it highlights the grain and leaves an awesome finish. Dude... no mask when spraying? Thanks for being an inspiration! Haven't used your jigs yet, but I will... soon! They're on my bench....
I know. My bad
The most exciting thing is that I see there's a presale for your stop block! I'm totally in!
That turned out nice. Great work!
I was wondering, could you engrave/etch the backside of some glass and go over it with contrasting paint to make it stand out?
Not sure but would be fun to try. I was thinking about adding tint to the back side
Great video. Awesome bit. So nice of you to give this away.
Dude!! That case came out kick ass man. I really love the glass etching. I have yet to tackle my first dovetail, but I'm hoping in the near future to buy your jig to make things easier for me. Thanks again for sharing home skillet!
Always inspirational, enjoy your workmanship and vids
Crazy nice router bit cabinet!
Absolutely gorgeous! Simple, efficient and beautiful...a well balanced piece my friend! 👍
Just starting to get into woodworking as a hobby and I am amazed at what kind of jobs a router can do! If I did win it would be so cool!! 🤞🏼🤞🏼🤞🏼
Good luck bud
AWESOME looking cabinet Johnathan! And that flush trim bit is a BEAST! and ur right about fixing ur mistakes! Good luck to all that enter!
Beautiful storage 😊cabinet 👌Katz. Thank you
Got your templates and subscribed to your newsletter
Some of the bits seem to be a bit tall for each shelf, do you think perhaps you should have made them pull out shelf's? Just looks like the ones that get put in the back might be hard to get out/put in. Awesome design though, love it, esp the etched glass. I am just starting to get into routing, so I suspect eventually I'll need some sort of organizer as well. I'll keep this in mind for sure!
Every hole is wholly useful
I wish I could enter the competition but I only have a 1/4" router and don't use it that much so it's better to go to someone else.
That cabnet looks great, even with the odd mistake.
I could see in your shop that you have a lot of really amazing tools in your collection. So why are you still using spray cans rather than a spray gun? Was there a big learning curve when you bought your CNC and do you make your own templates(programs)?
Way easier and no clean up. Big projects I break it out.
Yes
Yes
amazing work AND editing!
great vid! love how u explain and def love your work, great job!
I'm just going to say it ur the goat amazing work
Thanks bud!
Can you do a video on buying hardwood lumber?
Can you not put bits in holes closest to the glass because they were drilled straight?
"the way it holds my bits" Hahahahah! Nice work! I love that you shared your mistakes, shows you're human. This is how you learn. You know Veritas makes a miniature router plane that works great for mortising little hinges ; )
I need one! Po box 8516 Goleta CA 93118 ;-)
so much skill again so cool project great great great cheers from france
Merci!
Great video! And why a latch, rare earth magnets would do great holding the door :-)
So need to do this!!!
That cabinet looks great ! Just a minor remark about it though. How are you going to take out a small bit that is in the back when there are several other placed in front of it. I mean, you glued everything so you can't take the shelf out. I'm not an expert, but i was just wondering about it because i have big hands. And i would have a lot of trouble getting that bit in the back.
If I filled that thing up it would be like 10k dollars of bits. I don't think I'll ever have that issue but you could just build it to suit your needs
I have a chase patio lounge that needs top board replaced. The top board has slats going into the side of it for the back. What bit or how would I cut the slots for the slats to fit into to repair this? Thank you.
This turned out great. Love it. That drag knife bit is cool. Wonder if I can use that on my xcarve?
Absolutely. It's a 1/4" shank.
Hey Jon, I wonder why you don't use a spray gun to apply the polyurethane to your builds. The spray cans lost pressure so fast, at least from my point of view.
I use lacquer and absolutely hate polyurethane. Lacquer is great stuff for high use applications. I use an HVLP gun on bigger projects but for stuff like this the rattle cans work great. This project used about half of a 6 dollar can.
looks class!
That turned out great Jonathan, hopefully one day I'll have enough router bits to build a cabinet for them.
I must be a really good woodworker because of all the mistakes I have to fix!
PS: Thank you for another giveaway.
My pleasure bud!
When you mentioned the mistakes, I put my hands over my ears and, in a very loud voice, said 'NAH NAH NAH NAH' so I couldn't hear it. We do NOT want our illusions shattered!. ;-) It's a beautiful case right down to the glass etching. Most of my bits are in a box that has a large plastic window in the lid which looks cool, but soooo much less cool than your new case.
That is a beautiful build. Looking to make a router bit cabinet, this was some good inspiration. Thank you!
Wonderful
Just awesome, I really enjoy how you present your craft. I'm new to woodworking and find it very inspiring to see what you make. Thanks for showing us the mistakes you've made along the way. I dont feel so bad for some of the brain farts that I have along the way 😁. Thanks again for everything you're bringing to the craft.
Hahaha thanks bud. Woodworking is a comedy of errors
Excellent cabinet! I guess the maker is left-handed? The doors are opening that way... ;)
Fantastic video, keep up the great work!
Thanks for sharing the mistakes. I thought I was the only one that made them.
Nice piece.
Very nice!!💜
Bits please! That looks beautiful
Was gonna make something like this soon. I like it!
Send pictures!
@@katzmosestools will do! I'm stuck right now debating whether to buy a jointer or keep using my Jack plane. As projects become bigger its getting to be a lot more work!
@@TheTranq get an 8 inch as soon as possible
@@katzmosestools I'm really considering it...do you ever find yourself wishing you had a wider cut range than 8 inches? I definitely won't get 6
occasionally but 8" is kind of where the price size graphs cross. 12 inchers are expensive
Johnathan you are human not superman! We all make mistakes, but lease you own up and You are honest to come clean 🤩😏
Very nice project
It's awesome ~
What spray did you use?
Lacquer
@@katzmosestools thanks~^^
Good video. Nobody is perfect.
Great stuff as usual!