We, errr, we'd just like to say umm, umm it's been a few years since umm, we umm, we made this video and we er have improved our speech to include er EVEN MORE ums and errs per video in our latest er, creations, um. Thanks for the support everyone!!
Dumb question but does it keep filling the grenade up passed the psi limit that you set? Like if you set the chargers gauge to 400 psi and leave the charger in the grenade for 10+ seconds would the grenade go passed 400 psi and explode or would it just sit at 400psi? If it does keep filling the grenade then how do you know how many seconds to charge the grenade for before it’s been too long?
Hey there, the psi setting would be the max pressure you can fill something, so setting it to 200 psi would fill stuff to a max of 200 psi no matter what. Usually a few seconds is enough to completely fill something. ^^
Shot in the dark here, but... Having some trouble locating o rings for madbull products. One of the rings I’m looking for is the one under the screw opposite the regulator knob. Do you know what the size is?
Dar Tannion We’re very sorry but we do not know the size of that O’ring. Sometimes it’s possible to replace with an O’ring one that is slightly larger or smaller but it doesn’t always work. We’ve also tried buying sets of O’rings in all sizes before, but found that there are O’rings in irregular sizes. We would recommend shooting Madbull an email, but have experienced zero help from them before (multiple emails on multiple occasions regarding different issues). Sorry we couldn’t help, but thanks for watching! ^^
@@AirsoftAfterHours Thanks alot for responding! also i got another question, do you happen to know how the little i guess papers thingy you put in the shell after the wads so that the BB don't just all fall down?
max notsaying I’m sorry I don’t, I purchased the salient shot gun and it came with the papers but I never used them, I kept them as I’m a bit of a hoarder and used items like rubber balls in the shot shells.
Hello AirsoftAfterHours, I need one of these for my DM870 which takes Co2 shells, would like to ask, how do you know when you are running low on the Co2 capsule? How many 200psi charges can you get? Approx will do. Thanks!!
Hey buddy! SWEET SHOTGUN!!! we haven't tested the amount of fills you can achieve at 200 psi so we don't wanna guess and its been a while since we used the CO2 filler. When the capsules start to run out, the Psi drops considerably which you will be able to see on the Psi gauge. So lets say you set it to 200, when the capsule is close to empty, the needle will drop and you will be at a lower psi. Congrats on your awesome shotgun and thanks for stopping by again! ^^
I use this Madbull Co2 device to set pressure between 250 psi to 350 psi, and injected the Co2 into my green gas magazine. It can shoot, but it can only support 4 shots. Very unstable in these 4 shots' muzzle velocity.
If you only pressurise with CO2 at 200psi, you'll only get Gas in the Mag, and therefore only a few shots. CO2 pressure is around 850psi. Gas Mags (CO2/Propane/134a/etc) work by being filled with gas under enough pressure to be stored in their liquid form, then they produce the same pressure when the Gun is fired, until all the liquid (Gas) is used up.
If there’s a pressure adjustment knob shouldn’t you theoretically be able to adjust the pressure to the same pressure of Green gas. Similar to how you can do the same with propane?
No, that's not correct. Airsoft Mags need to have the Gas filled in liquid form, that's why you hold the Gas Canister upside down when you charge your Mags, to fill them with Liquid Gas, not just the Gas itself.
Almost a good video .. I was hoping for answers to why it would or would not work on a CO² pistol. Instead I got zilch for even a clue. Please be please be more concise.
Hey-ho there, guy. I really, ummm-ahhhh... enjoyed the ahh video and I um want I want oh ahh hope, yeah hope... ahmm that you get great results ummm ahh and have ummm a ton of ahhh success. I really do um hope the ahh best for your umm channel. Ahh YEAH! That about um says it all. Yup.
We, errr, we'd just like to say umm, umm it's been a few years since umm, we umm, we made this video and we er have improved our speech to include er EVEN MORE ums and errs per video in our latest er, creations, um. Thanks for the support everyone!!
Very well done video...thank you so much for top quality information on this subject!
Thank you kindly sir! 👍🏻
Dumb question but does it keep filling the grenade up passed the psi limit that you set? Like if you set the chargers gauge to 400 psi and leave the charger in the grenade for 10+ seconds would the grenade go passed 400 psi and explode or would it just sit at 400psi? If it does keep filling the grenade then how do you know how many seconds to charge the grenade for before it’s been too long?
Hey there, the psi setting would be the max pressure you can fill something, so setting it to 200 psi would fill stuff to a max of 200 psi no matter what. Usually a few seconds is enough to completely fill something. ^^
Hey, my gbb can use black gas that has around 230 psi. Can I use co2 with it if I set charger setting to 200 psi?
Shot in the dark here, but... Having some trouble locating o rings for madbull products. One of the rings I’m looking for is the one under the screw opposite the regulator knob. Do you know what the size is?
Dar Tannion
We’re very sorry but we do not know the size of that O’ring.
Sometimes it’s possible to replace with an O’ring one that is slightly larger or smaller but it doesn’t always work.
We’ve also tried buying sets of O’rings in all sizes before, but found that there are O’rings in irregular sizes.
We would recommend shooting Madbull an email, but have experienced zero help from them before (multiple emails on multiple occasions regarding different issues).
Sorry we couldn’t help, but thanks for watching! ^^
AirsoftAfterHours thank you for your reply. Out of the twenty or so sources I’ve reached out to, you’re the only ones who messaged back. Kudos.
Mine wont go off, the button in the end is just wont go down, I only got 100 psi into it ??
i know i most likely won't get a answer but does this work to load the CAM870 shotguns shells?
max notsaying
I never tried using it for that actually, but I would say no at a guess just to be safe. Best use the original shell filler 😊
@@AirsoftAfterHours Thanks alot for responding! also i got another question, do you happen to know how the little i guess papers thingy you put in the shell after the wads so that the BB don't just all fall down?
max notsaying
I’m sorry I don’t, I purchased the salient shot gun and it came with the papers but I never used them, I kept them as I’m a bit of a hoarder and used items like rubber balls in the shot shells.
No prob brother! I actually found what i was looking for haha! Thank you and awesome vids!
so these gas tanks are the same as bicycle tire fillers right ?
Hello AirsoftAfterHours, I need one of these for my DM870 which takes Co2 shells, would like to ask, how do you know when you are running low on the Co2 capsule? How many 200psi charges can you get? Approx will do. Thanks!!
Hey buddy! SWEET SHOTGUN!!! we haven't tested the amount of fills you can achieve at 200 psi so we don't wanna guess and its been a while since we used the CO2 filler.
When the capsules start to run out, the Psi drops considerably which you will be able to see on the Psi gauge. So lets say you set it to 200, when the capsule is close to empty, the needle will drop and you will be at a lower psi. Congrats on your awesome shotgun and thanks for stopping by again! ^^
Can you use it for a pistol CO2 tank ???
This may sound dumb, but is it possible to use this with an HPA tank?
Does this refill co2 cartiages for the 1911BB or other pistols.....and just any co2 cartiages????
If I set the pressure at a level around 200 psi, does that mean this 200psi Co2 could be injected into Green Gas airsoft Magazine? Thank you
Di Hu
I want to know the same thing, I wish he would answer this question
I use this Madbull Co2 device to set pressure between 250 psi to 350 psi, and injected the Co2 into my green gas magazine. It can shoot, but it can only support 4 shots. Very unstable in these 4 shots' muzzle velocity.
If you only pressurise with CO2 at 200psi, you'll only get Gas in the Mag, and therefore only a few shots.
CO2 pressure is around 850psi.
Gas Mags (CO2/Propane/134a/etc) work by being filled with gas under enough pressure to be stored in their liquid form, then they produce the same pressure when the Gun is fired, until all the liquid (Gas) is used up.
What is the amount of air in psi a 12g co2 has?
Michael Airguns
Good question, about 800 psi is the max pressure I believe, thanks for watching!
@@AirsoftAfterHours great Thanks for anserwing .. I'll try to an hpa on mine...
@@AirsoftAfterHours 800PSI!???
WTF
Very useful information. Where can I buy the refillable cartridges?
Dave Hyre
Evike, airsoft gi, places like that on the Internet
If there’s a pressure adjustment knob shouldn’t you theoretically be able to adjust the pressure to the same pressure of Green gas.
Similar to how you can do the same with propane?
No, that's not correct.
Airsoft Mags need to have the Gas filled in liquid form, that's why you hold the Gas Canister upside down when you charge your Mags, to fill them with Liquid Gas, not just the Gas itself.
Can i use the tip ang put it on hpa tank and charge my nagazine?
Can I use it With a gbb who can run co2 or gaz ? Like refill my gaz mag with it
No, the pressure will be too high for a green gas mag, ^^
@@AirsoftAfterHours thanks
I am a expert grenadier M203 ! the real grebadlaucher is not very loud !
is it unlimited refill with the device?
Limited to the co2 that you have. Also, check out using this with a grenade: ua-cam.com/video/a4kh3-GqG4g/v-deo.html
Almost a good video .. I was hoping for answers to why it would or would not work on a CO² pistol. Instead I got zilch for even a clue. Please be please be more concise.
What about hicapa mags
How I want in on line
2:45 until he even opens the fucking box your welcome
Fucking ell thank yoy
You do a LOT of assuming ... :)
Hey-ho there, guy. I really, ummm-ahhhh... enjoyed the ahh video and I um want I want oh ahh hope, yeah hope... ahmm that you get great results ummm ahh and have ummm a ton of ahhh success. I really do um hope the ahh best for your umm channel. Ahh YEAH! That about um says it all. Yup.
Michel Gaudet jjajajajjajajajjajaajjajaaj that was funny jajjaajja
.