So you are coming out of the mixing board into the first speaker with that same cord then go into the second speaker and also the Y cables from one to the other and I’m assuming the Y cables are one cable connecting to each and then repeat to the last one correct?
In reality all you need to do is put the left signal to the mono blend, and for the right signal you go into your line and that way you have a true stereo connection to your subwoofer that way you cover all the spectrums of your sound.
@@dj_pollo1727 I haven’t seen my speakers since end of summer 😂 they still in the garage covered up 🤦♂️ hopefully when the place get warm. So tell me the difference on how they sound ?
Thanks for the info. Just bought 2 of them yesterday and will pic them up today and will try what you said. Thanks.
I got the PSA2 it's not enough inputs in the back to do a Y set up but that shit is a monster on its own
So you are coming out of the mixing board into the first speaker with that same cord then go into the second speaker and also the Y cables from one to the other and I’m assuming the Y cables are one cable connecting to each and then repeat to the last one correct?
yorkville manual says if coming from a mixer use the line setting on your first sub,,,,,maybe speaker settings on sub 2 and 3 ?????
Have you done this trick with a top speaker? I heard of some people doing this with qsc tops also!
I have done this all entry level powered speaker
@@Thekillafacesoundwhat tops you have with the yorkvilles
@@ThekillafacesoundHello, I have a question. Do you recommend that I change the ES15P for the ES18P? There would be a big difference in power.
Who build your y cables,n what range of wire gauge 8 or 10
What the price range on these Yorkville bass box?
What does the reset do ?
I'm gonna try the Y-cable thing on mine to see if I notice a difference, I've never heard of this before..
Have you tried it? If so what’s the difference… let me know asap I’ll go get Y cables for mine…
Thank you for the information.😊
So don't you think that they limit faster?
what if you run out of your subs up to your tops..? is there any issues with this method..?
Ubieras enseñado desde el mixer a los bajo y por que usas esas y
The first one was the LS800 then the LS801
In reality all you need to do is put the left signal to the mono blend, and for the right signal you go into your line and that way you have a true stereo connection to your subwoofer that way you cover all the spectrums of your sound.
Becarefull
Hey brow can you show us from the mixer to the bus and tops that would help us better
I tried the same method and oh boy this bass kick hard day and night
Hello, I have a question. Do you recommend that I change the ES15P for the ES18P? There would be a big difference in power.
I have an ES18P I will try this Y splitter to hear the difference
You try? Is a big difference?
@@dj_pollo1727 I haven’t seen my speakers since end of summer 😂 they still in the garage covered up 🤦♂️ hopefully when the place get warm. So tell me the difference on how they sound ?
That's because you are mono bass not bridge