You should move your lift closer to the garage door and utilize the back of the shop as your fab/customization area and the front of the shop the mechanic area.
Been watching you since you installed that exhaust on your friends Blue STI Hatch and I’ve been seeing you powder coat for a while now. I started working for prismatic powders about 6 months ago and it’s amazing to see you use our products! 🙏🏼
Hey Devin I used to run a fairly small scale powder business around a similar space to yours, and I always had my cars in the way getting worked on. You set things up the way you want it, but if you want my advice I would say try and have things in sequence. So at the moment the sandblaster and the oven are opposite sides of the room so you’re going to have to roll or carry wheels across past all your cars. If you have almost like an assembly line going from the acid tank at the door, then along the same wall is the sandblaster, and then just next to that is the oven with a space at the front big enough for the rack to hang and you can blow powder at wheels and then straight into the oven.
Congratulations on the massive upgrades for the garage my dude.....u gonna save so much time ...n they will pay for themselves within a few builds ....keep up the great work love all the videos...been following bout 4 years now
From the middle of the middle east I’ve never been exited over a you tuber as i did when i watch you growing it’s been 2 years now hope the best for you
I'd move the new massive oven towards the front of the shop in the corner by the man door and strip tank leaving enough room to still use the man door if needed. would take up less of your storage space and be easier to access while not really being in the way of your work space or anything
This is bad ass 🤙🏽 One thing i recommend is moving the sand blasting cabinet closer to the bay door. Reason for that is when u take parts out of the cabinet, there will be media falling off the part onto the floor. The closer you can have it to the exit door, the easier it will be to keep everything else clean. Other then that congrats and i look forward to seeing the channel expand 🤙🏽
Now you gotta up your powder coating gun. The ez50 is nice but you've gone straight pro Devin so maybe a Wagner or Nelson something along those lines with micro Amp adjustment and 100kv then do a dedicated ground rod 🤔
finally bro! i knew you were going to buy a new oven but a new sand blaster? bro you have defiantly over exuded my expectations. well done man i'm exited to see what you do with the new rigs. 😁
Did I saw an fk8 blue bumper over there , did he bought a wreck type r to build ? 🤔 I hope you did buddy I been waiting for you to get an fk8 you will enjoy it 600whp on stock engines
Vasyn Apparel ... What's next Vasyn Powder coating lol ... About time you got a bigger oven .. Now you can do 4 wheels instead of waiting around for 1 to finish 👌
Nice! That’s a serious oven! Now you can start your own powder coating side business 😂 now I’m just waiting for that shop upgrade! Keep up the great content!
I was like bruh, why did you bought the big oven isn't that overkill. But then started thinking, 4 wheels at once, subframes and so on and I was like well Devin being Devin would use the entire space needed in the oven for parts or multiple parts so it ain't overkill at the slightest lol.
Devin, I have the opportunity to purchase a 1993 lancer evo 1 gsr. Should I buy that or a 2006 Subaru sti? Both are roughly the same price and I’m stuck on what to do cause they’re both cool.
cool oven but isn't the floor supposed to be isolated from the ground ? that big hunk of metal contacting the floor doesn't look like a good heat retainer
Hey Devin, why don’t you move into the bigger shop that way you have more space for hoists and all your new purchases and then put vasyn in the smaller shop
You going to save so much time with this new oven, being able to run multiple parts and wheels at the same time!
Why not make the small shop the V HQ, then the big one the shop shop so more room = more car?? Congrats on the oven, can’t wait for more content!!!
Facts would be a good decision specially with how many cars he has
i was thinking the same thing
Because maybe it’s a shop where you the owner who devein is renting off doesn’t allow motor vehicles in there
@@anthonyhart1344 he has cars in it right now. he showed them in videos. maybe there is noise restraints or something though
I was thinking the same thing man..
This is a complete game changer for you Devin, so stoked to see some parts coming out of the new sand blaster an into the new oven 🤙🏼
You should move your lift closer to the garage door and utilize the back of the shop as your fab/customization area and the front of the shop the mechanic area.
Maybe the small shop should be the V hq with how big the sand blaster and oven is lol
Yea, I can see bigger shop coming quite soon.
So happy for you Devin! I know you wanted these things for a long time! Congrats!!
Been watching you since you installed that exhaust on your friends Blue STI Hatch and I’ve been seeing you powder coat for a while now. I started working for prismatic powders about 6 months ago and it’s amazing to see you use our products! 🙏🏼
Hey Devin I used to run a fairly small scale powder business around a similar space to yours, and I always had my cars in the way getting worked on.
You set things up the way you want it, but if you want my advice I would say try and have things in sequence. So at the moment the sandblaster and the oven are opposite sides of the room so you’re going to have to roll or carry wheels across past all your cars. If you have almost like an assembly line going from the acid tank at the door, then along the same wall is the sandblaster, and then just next to that is the oven with a space at the front big enough for the rack to hang and you can blow powder at wheels and then straight into the oven.
Congratulations on the massive upgrades for the garage my dude.....u gonna save so much time ...n they will pay for themselves within a few builds ....keep up the great work love all the videos...been following bout 4 years now
From the middle of the middle east I’ve never been exited over a you tuber as i did when i watch you growing it’s been 2 years now hope the best for you
I've been watching you since you first built the FRS. You've come a long way! Can't wait to see what happens in the new shop.
I'd move the new massive oven towards the front of the shop in the corner by the man door and strip tank leaving enough room to still use the man door if needed. would take up less of your storage space and be easier to access while not really being in the way of your work space or anything
This is bad ass 🤙🏽 One thing i recommend is moving the sand blasting cabinet closer to the bay door. Reason for that is when u take parts out of the cabinet, there will be media falling off the part onto the floor.
The closer you can have it to the exit door, the easier it will be to keep everything else clean. Other then that congrats and i look forward to seeing the channel expand 🤙🏽
Finally an oven bro ! So stoked for you. Also jellious.
That's some oven! Can't wait to see what you do with it..congrats!!
Wow! Can't wait to see how you use it.
✋🏼 from the Philippines
Congrats man the shop coming together
Definitely going to be powder coating subframes, motorcycle/dirtbike frames, offroad bumpers for trucks, and more, great purchase💪🔥
Been watching you level up for a while now. Well deserved.
Congrats, can't wait to see the quality of your work.
Now you gotta up your powder coating gun. The ez50 is nice but you've gone straight pro Devin so maybe a Wagner or Nelson something along those lines with micro Amp adjustment and 100kv then do a dedicated ground rod 🤔
Awesome upgrades for the shop, practical, will save time and money
Watching since the very beginning of the OG Evo camo build. So happy for you dude, keep up the good work!
Awesome, just awesome, can't wait for video, where you will use those!
This made me laugh man. Finally! Happy for you
finally bro! i knew you were going to buy a new oven but a new sand blaster? bro you have defiantly over exuded my expectations. well done man i'm exited to see what you do with the new rigs. 😁
So excited for the content coming !
Moving on up so happy for you bro I see some awesome stuff coming 👏
Love the channel you got I have a 2003 Impreza wrx and I use allot of your advice and I love all your cars.
Bro killer setup man🤘🏻your investments will all payoff. Your making smart moves man keep it up.
Devin's such an underrated youtuber
I’ve been waiting for this moment!
Shop needs a proper rearrange now. Move the hoist forwards and make the back half the “work areA” with the oven and sand blaster, tyre machines etc.
The GOAT is back with another one
Let’s go! Another banger video coming, I had a feeling you got a an oven for powder coating!
“Good job Jared” devin sounds like a proud dad 🤣
It’s always good to upgrade the equipment 💡
Did I saw an fk8 blue bumper over there , did he bought a wreck type r to build ? 🤔 I hope you did buddy I been waiting for you to get an fk8 you will enjoy it 600whp on stock engines
FINALLY!!!
Looks good!👍
Rip og oven:( the day has finally come.
Upgraded that oven to the moon! Yes!
You can powder coat the small oven now
Hey I have some Ozie wheels that need to be powder coated are you gonna be doing jobs on the side
Vasyn Apparel ... What's next Vasyn Powder coating lol ... About time you got a bigger oven .. Now you can do 4 wheels instead of waiting around for 1 to finish 👌
Nice! That’s a serious oven! Now you can start your own powder coating side business 😂 now I’m just waiting for that shop upgrade! Keep up the great content!
Awesome devin congrats you should switch put hq in shop building an shop at hq building more room
I was like bruh, why did you bought the big oven isn't that overkill. But then started thinking, 4 wheels at once, subframes and so on and I was like well Devin being Devin would use the entire space needed in the oven for parts or multiple parts so it ain't overkill at the slightest lol.
Awesome acquisition
should do a full flip of shop, everything from left to right would be perfect for everything even the lift to infront of the bathroom 😮💨
Finally! Congrats
Love the vids keep up the great work
Devin, I have the opportunity to purchase a 1993 lancer evo 1 gsr. Should I buy that or a 2006 Subaru sti? Both are roughly the same price and I’m stuck on what to do cause they’re both cool.
cool oven but isn't the floor supposed to be isolated from the ground ? that big hunk of metal contacting the floor doesn't look like a good heat retainer
Can you get that oven wired so you can disconnect it and move it for cleaning the floor
Will the heat from that oven not ruin your vinyl on the wall or on the cars?
I knew it ! I answered on IG that it was an oven for powder coating 😌😌😌😌
Well well well..... Now when is this type R civic build is starting up can't wait to see that thing completely 😋
How many shops do u have now 2 I thought u where moving to a new shop
I’m jealous. I need a bigger oven so bad. Ever need some help to use all that fun stuff let me know.
Is better if you switch shops the bigger one for you to work an the other for the merchandise
It came, it finally came...the BIG ONE!
-Sid from toy story
Lets go! Everything getting coated lol
Is this your new shop ? looks smaller than the previous shop.
are you moving out of the small shop?
Bro leave the oven b the door yyouu can always paralelle par around it and it will help decipating the heat....
FINALLY!!
Fix the crank walk EVO!
About time mate
That massive oven will fit everything car parts wheels sheesh so sick Devin.
Is the a Honda Civic front bumper. 🤔🤔
Was this before the new shop?
How are you going to get to the controller for over
Does your blow up paint booth still fit with the new oven?
had a feeling that's what was in that huge crate you got in the shop
Am i the only one disappointed not seeing jared getting powdercoated and come out a different color after going and getting licmed in the oven? 🤣
Did they send you any plastic for your windows so the sand doesn’t mess them up?
Hey devin I forgot wat the discount code is for simply carbon fiber if you could help me with that
About time Devin 🤣
👍🏻
This is a truly monumental day
Wait what happened to the couch on top of restroom? Did I miss a episode? Lol
Why you setup all this and not in the big shop
We’ll done bro 🙏🏻🙏🏻
When can we see any EVO 4 content?
Should be able to do 4 wheels ALL @ once now Devin🤔👌🏻.
I wanna know how much that sandblaster was
Could powder coat whole subframes now :) ❤️
I’d use the new HQ as the new shop and use this shop as your HQ.
think you should move your shop to the other unit
Chef Devin is about to cook
Wait didn’t you get a new shop why didn’t y’all wait to do it all before?
Put RainX on the inside glass
Damn those are nice
Hey Devin, why don’t you move into the bigger shop that way you have more space for hoists and all your new purchases and then put vasyn in the smaller shop
Now u baked wheel and pizza at the same time 🤣👍🏼
You really need to get a vapor honing machine
i actually said something lol
"hell yeahhh" when i saw the title!
anyone notice the civic type R front end? I think we know what’s coming Devin ;)
You should get some land and just build a house and shop that'd be sweet 😋 ☺️