Thank you for a wonderful demo and review as always Leo! This is a fascinating pedal that looks and sounds like it solves a lot of little niggles I have with my setup (headphones/stereo loop/aux in etc). A serious contender indeed. A Swiss Army Knife for Tonex/Dream 65 (among others) users 🙂Thank you.
Hi Leo. It is a great product. It would substitute some things I have and also add the doubler. In any case, what I wanted to say is that the demo song was crazy great and your playing sublime.
I agree with your comment. Loved the demo song, but the doubler made it sound a bit tinny. Can't wait to see another video on your pedal board. NAM player vs Tone X video later? God bless and rock on 👍😎🎸
What you describe is the result of too short delays. I don’t know this pedal but if delay times are adjustable, choosing something longer could help. It turns out doubling, ADT as it’s always been known, is a very challenging effect to create well. I use some great plugins in Pro Tools (Sonnox Doubler; Waves Abbey Road ADT) and my Eventide H3000 Harmonizer hardware is very well known for doing a great job of it live. Perhaps you’ll like one of the Eventide pedals. Just a suggestion. Always hard pan the outputs whatever you use. They generally do not sum to mono well at all.
@@artysanmobile you'd think, in this digital age, it'd be simple to achieve. I've seen the Mimiq Mini Doubler pedal by TC Electronic - it only costs £78 so I might give it a try.
Hi Mr Leo. I have a question about the stereo TS jack output. I have watched several videos about this Endgame pedal. In one of those videos (can't remember which UA-cam video... probably from John Nathan Cordy's video, but i'm not sure...), mentioned something about DIP switchers for the TS jack output (i assumed those DIP switchers, if at all it does exist, would be inside the pedal). If these DIP switchers do exist, does it means that i can assigned the stereo TS jacks to output the whole signal chain WITHOUT the IR/Cab Sim/ Power Amp but with the rest of the signal chain (including the stereo FXs & Doubler), to be sent to two unit of my Orange Rocker 15 amps' FX Return for my stage monitoring (instead of FRFR or monitor wedges), WHILE, the XLR stereo outputs will be sending everything (including the Endgames' built in Cab Sim & Power Amp sim) to the PA system? Sorry for the long question....Btw, awesome video, as always...
The only issue I see is the fact that it's a mono input, correct? If I wanted to use TWO preamp pedals like the Ruby 63 and Dream 65, then this pedal will not be able to handle this setup, am I right? or did I overlook something?
Hi, do you want to use two preamps at the same time? If not I would use an A / B Box to select the one you need. Otherwise you put one after the other and you switch on the one you need. The last possibility is to use the return of the effect loop of the END Game to have both active at the same time. Thanks
@@LeoGibsonGtr Thank you! Yes I would like to use a dual amp setup like two Tonex pedals running different amps at the same time. Awesome video and I’m strongly considering this product!
Thank you for a wonderful demo and review as always Leo! This is a fascinating pedal that looks and sounds like it solves a lot of little niggles I have with my setup (headphones/stereo loop/aux in etc). A serious contender indeed. A Swiss Army Knife for Tonex/Dream 65 (among others) users 🙂Thank you.
You are welcome!!
Yes, it is a very interesting pedal that solves a lot of problem...I do agree!
Hi Leo. It is a great product. It would substitute some things I have and also add the doubler. In any case, what I wanted to say is that the demo song was crazy great and your playing sublime.
Thank you soooo much for such an amazing compliment that really makes me happy!!!
Very good review, as always Leo. The doubler seems to impart a tinny resonance. Other than that, a neat device.
I agree with your comment. Loved the demo song, but the doubler made it sound a bit tinny. Can't wait to see another video on your pedal board. NAM player vs Tone X video later? God bless and rock on 👍😎🎸
Thank you, I'm really happy that you appreciate the review!!
Thank you, yes, I have to work about a ToneX vs NAM Player comparison...
What you describe is the result of too short delays. I don’t know this pedal but if delay times are adjustable, choosing something longer could help. It turns out doubling, ADT as it’s always been known, is a very challenging effect to create well. I use some great plugins in Pro Tools (Sonnox Doubler; Waves Abbey Road ADT) and my Eventide H3000 Harmonizer hardware is very well known for doing a great job of it live. Perhaps you’ll like one of the Eventide pedals. Just a suggestion. Always hard pan the outputs whatever you use. They generally do not sum to mono well at all.
@@artysanmobile you'd think, in this digital age, it'd be simple to achieve. I've seen the Mimiq Mini Doubler pedal by TC Electronic - it only costs £78 so I might give it a try.
Hi Mr Leo. I have a question about the stereo TS jack output. I have watched several videos about this Endgame pedal. In one of those videos (can't remember which UA-cam video... probably from John Nathan Cordy's video, but i'm not sure...), mentioned something about DIP switchers for the TS jack output (i assumed those DIP switchers, if at all it does exist, would be inside the pedal). If these DIP switchers do exist, does it means that i can assigned the stereo TS jacks to output the whole signal chain WITHOUT the IR/Cab Sim/ Power Amp but with the rest of the signal chain (including the stereo FXs & Doubler), to be sent to two unit of my Orange Rocker 15 amps' FX Return for my stage monitoring (instead of FRFR or monitor wedges), WHILE, the XLR stereo outputs will be sending everything (including the Endgames' built in Cab Sim & Power Amp sim) to the PA system? Sorry for the long question....Btw, awesome video, as always...
The only issue I see is the fact that it's a mono input, correct? If I wanted to use TWO preamp pedals like the Ruby 63 and Dream 65, then this pedal will not be able to handle this setup, am I right? or did I overlook something?
I would like to know the same thing! Would be awesome!
Hi, do you want to use two preamps at the same time? If not I would use an A / B Box to select the one you need. Otherwise you put one after the other and you switch on the one you need. The last possibility is to use the return of the effect loop of the END Game to have both active at the same time.
Thanks
@@LeoGibsonGtr Thank you! Yes I would like to use a dual amp setup like two Tonex pedals running different amps at the same time. Awesome video and I’m strongly considering this product!
The power up is an odd failure
I've had this same issue with a couple of other pedals. It's power supply dependent - some supplies don't provide sufficient current on startup.
@@ryanneal3139
Because of the draw of other units?
That would suggest the PS is too small...
What happens if you off/on at the wall?