Way to make it happen, I appreciate you!! I felt you @8:17ish where you were looking a little perplexed!! I was right there, same struggle earlier today!
Nice job, but If you are doing that job, why not replace the other bearing as well for the extra 15 bucks... And you could also buy bearings with a rubber insert instead of the old metal original parts. Having said that, I am sure I would have like to have seen this video before i began repairing ours. But in the end it worked out perfectly. Thanx for the nice video.
Oh it's getting loud again, I'm planning to replace it again, but 2 years is not bad for cheap after market bearing. Surely the oem will last longer. Hey thanks for watching my video. I hope you subscribe. Have a good one!
Hello! I'm a fan of yours! I myself also repair washing machines and am currently on the process of changing a Samsung Quick Drive WW8800 to the warehouse, maybe you can make a video of it? It is more complicated than with normal washing machines. Greetings, David
Just changed the bearings and seal and my washer won't power back on 🤦♂ Is there a reset sequence or would I have blown a fuse? Your video was very helpful thanks
Hi, I have washing mashine Samsung WF706P4SAWQ. Can You help me find sizes of bearings and simering for this model? I'll be very greatfull. Thank You. Przemek.
My washer was making turbine loud noise when spinning i replaced the bearings and wala back to normal. 3 months later its starting to get loud again could it be the bearings again
it depends on the quality of bearing you i stalled. I installed an after market bearing, cheaper than of oem bearing. It was not loud but not as quiet as before.
@@juroworkshop I have a Samsung front loader replaced it with a samsung bearing and it was quiet at first. But I can notice its starting to get loud again when it spins.
@@dant3113 there's something causing the bearings to prematurely fail. I would check the shock absorber, the nuts holding the heavy weights behind the front cover, the feets (must be level) and evenly load the machine.
@@vsbaratinho it's actually the spider arm that is rotting. The shaft had minor root which is enough go let water into the bearings allowing the bearings to fail in short time
I just started to get this thumping sound at high speed. Did anyone here face the same sound? Wanna make sure I replace the right part before I order and disassemble. Thank you.
Why did you only replace the inside bearing and not the backside bearing as well. They're cheap and you already have it all torn apart. The back side bearing can wear out too and then you're gonna have to do this all over again.
Samsung just killed my hopes with this one! My washer is not that old. No one wants to do this job. Not a favorite part to replace. The cost would be more than a new washer. Shame on Samsung!
He’s not a teacher. He doesn’t owe us his time or instruction… time lapse are mostly for the purpose of seeing how much work goes into any given project.
Nice of Samsung to make a simple bearing repair into something extremely difficult and time consuming!!!
nice summary of the process. there are other videos on YT that do go slower and talk about the process. Those are 40 minutes rather than 12.
Way to make it happen, I appreciate you!! I felt you @8:17ish where you were looking a little perplexed!! I was right there, same struggle earlier today!
Thank you for documenting this, thats my Saturday morning of repairs planned.
Top tip, put the bearings in the freezer for 24hr before fitting, they will slide in easier and then expand a touch once to room temp.
I also replaced the bearing on my AEG lavamat myself 👍It was not an easy job , But i did it and now it works just fine .
Thank you! I've done this before. Needed a quick refresher. Appreciate the recording! Job sucks lol!
Nice job, but If you are doing that job, why not replace the other bearing as well for the extra 15 bucks... And you could also buy bearings with a rubber insert instead of the old metal original parts. Having said that, I am sure I would have like to have seen this video before i began repairing ours. But in the end it worked out perfectly. Thanx for the nice video.
What to but whole kit for Samsung wf56h9100ag/a2? I can’t seem to find anywhere. Thank you!!!😊
I'm curious how the bearings have held up 2 years later?
Great vid! I have the exact same model and problem
Oh it's getting loud again, I'm planning to replace it again, but 2 years is not bad for cheap after market bearing. Surely the oem will last longer. Hey thanks for watching my video. I hope you subscribe. Have a good one!
Same here after 3 yrs of usage 😢
Hello! I'm a fan of yours! I myself also repair washing machines and am currently on the process of changing a Samsung Quick Drive WW8800 to the warehouse, maybe you can make a video of it? It is more complicated than with normal washing machines. Greetings, David
Szia! Mennyi idős ez a mosógép, hogy már csapágy csere kellett?
Üdvözlet Budapestről
Just changed the bearings and seal and my washer won't power back on 🤦♂
Is there a reset sequence or would I have blown a fuse? Your video was very helpful thanks
Wow! Thank you for this video, I will be attempting to do the same.. wish me luck
Hi, I have washing mashine Samsung WF706P4SAWQ. Can You help me find sizes of bearings and simering for this model? I'll be very greatfull. Thank You. Przemek.
Ok. In the beginning, you showed the noise level, why not at the end?
Any way in telling if they are bad before taking it apart?
Yes, they will be loud in spin, very loud and sometimes the inner tub will be sloppy when you move it..
Hi, what tools are needed and how long did it take you? Thanks for the video!
is there a slow mode??
any idea what the bearing code numbers are?
The model # of bearing that I used is in the description, and for samsung bearing can be google... Thanks, I hope you can fix yours.
Can you post a link to the bearings please? Thank you
www.ebay.ca/itm/Samsung-FRONT-LOAD-WASHER-2-TUB-BEARING-SEAL-Kenmore-KIT-6-2-DC62-00156A/263454975117?hash=item3d5723e48d:g:g-8AAOSwdIFXyxd9
thank you bro ... very past practise .. good job
Holy hell. That is a long process for bearings that can be seen from the back panel. Almost wondering if it’s even worth the time! 🤦🏻♀️
Its a 650/$ or more repair... a 25 dollar bearing. Skill and knowledge goes a long way
How does speeding up the video help somebody see what it takes to get the job done
My washer was making turbine loud noise when spinning i replaced the bearings and wala back to normal. 3 months later its starting to get loud again could it be the bearings again
it depends on the quality of bearing you i stalled.
I installed an after market bearing, cheaper than of oem bearing. It was not loud but not as quiet as before.
@@juroworkshop I have a Samsung front loader replaced it with a samsung bearing and it was quiet at first. But I can notice its starting to get loud again when it spins.
@@dant3113 there's something causing the bearings to prematurely fail. I would check the shock absorber, the nuts holding the heavy weights behind the front cover, the feets (must be level) and evenly load the machine.
@@vsbaratinho it's actually the spider arm that is rotting. The shaft had minor root which is enough go let water into the bearings allowing the bearings to fail in short time
I like the fast forward noise
What I'm I supposed to learn from this. 😂😂
Do you think this would prevent the same machine, from switching into high spin.
I just started to get this thumping sound at high speed. Did anyone here face the same sound? Wanna make sure I replace the right part before I order and disassemble. Thank you.
Probably the shock absorbers underneath are worn out. Cheap to replace.
Thank you
I thought it was easier 🤔
Thank you very much
Why did you only replace the inside bearing and not the backside bearing as well. They're cheap and you already have it all torn apart. The back side bearing can wear out too and then you're gonna have to do this all over again.
I cant wait a month without a washing machine.....
😎👍
thanks
you need to talk to tell me what you are doing no music
You need to talk to tell me what you’re doing
Need some voice over to tell us what you're doing.
With the music
Samsung just killed my hopes with this one! My washer is not that old. No one wants to do this job. Not a favorite part to replace. The cost would be more than a new washer. Shame on Samsung!
Yeah, don’t think I am going to attempt this.
Just give it a try, if its working you save money, if doesn't....anyways you need to get new machine
It's asmr lol
Sad Samsung
Very poor video..try slowing it down, give some instruction and explanation.
He’s not a teacher. He doesn’t owe us his time or instruction… time lapse are mostly for the purpose of seeing how much work goes into any given project.
@kittaaan...Very poor comment. Obviously, you don't know the definition of "{time-lapse}".
That’s hilarious that you feel the need to criticize him. Go make your own informative video then!
You need to talk to tell me what you’re doing