can you please make a parts list and where to buy everything and the 3d printing stls please because I love your show and im really interested into making one of these little pi laptops you gave away
Are you looking for the files for this build or a different one? When we post build files, you can find them on the element14 Community here. bit.ly/2dcULuo
Make a steam portable handheld with the steam controller and steam link. Portable means portable battery and handheld as in I can hold it like a 3ds or vita
I wonder if there's a simple piece of code that looks at the accelerometer numbers then you can just say "capture right punch" or whatever action you want to call it, then do the motions and just hit spacebar at the same time the action happens and it will look at the numbers a few ms before and after the spacebar press and average/smooth it out. Then when it sees those same numbers it will show that action and even give you some numbers to punch into your arduino sketch.
I don't know if it can be considered 'simple', but I'm fairly sure tools like that exist. I remember mention of stuff like that being among the tools they gave to Wii game developers. As in, you'd hit record, do a motion, and the program would relate the sensor readings you recorded to an action. Then every time the software recognised that sequence of motion inputs, it would perform the related action. Unfortunaly I don't think (from experience with the games) it was that easy to set this up to work reliably, plus the software involved is anything but simple. (involves neural nets, pattern recognition, learning algorithms and the like. Nasty, complex, hard to understand stuff a lot of the time).
I wonder could you use a 74HC152 driven via a Johnson counter based on the 74AC74 operating as a double balanced QSD modulator to make your voice scary the Oscillator will have to be LOx4 so if you want 12khz carrier then it is 48khz that is used to drive the Johnson counter, A TI DSP chip should be able to do what your wanting and then interface the DSP chip into a FPGA chip programmed to do the other tasks you required done.
Yay, shout-out to Macrofab! You guys should do a collaboration video with C. Church. Build a smart dry-aging cabinet together so you have an excuse to eat steak and drink beer.
im not going to lie but i could care less about this but you have spoiled me with the Playstation prototype episodes! when are you going to install the cd reader? once completed then i will return to caring about the episodes again
Cool, I love making hats for Halloween. My first ever was a beanie with a real spinning propeller. A Jester hat with RGB's inside ping pong balls instead of bells on the ends. I've done a top hat with spinning POV kit that creates floating text around the hat (that one has a video on my channel). Another top hat with a couple of moving eyes and small alien type fingers coming out of the top with green backlighting. If I get it done this year, I plan on converting an old hard hat into a "Thinking cap" featuring; WS2812 RGB's inside the hat for a glowing effect, fake amplifier tubes w/ lighting mounted on top, e-cigarette and air pump as a fog machine inside the hat, some kind of energy drink piped into hat with a glowing hose (lit from the end with an LED). Also looking at adding a backlit LCD screen to print out thoughts or hat status.
Ben Heck Show acting is best acting.
Still better than twilight
*sparkles*
I agree with this !
YOTTAZOID 10/10
Karen is such a great addition to the show. Really love her resourcefulness and quirkyness
I'm happy Karen has had a lot more to do recently in episodes, it's really given the show a lot more life.
man, the regrettable acting is strong with this video. lol
You're welcome.
I love it, I think you're great. No idea why people hate on you so much.
Compliment fail.
p.s. Karen, you rock
JJiG
Karen: Ben, it's been feeling a lot like autumn outside so you know what that makes me think of?
Ben: going back to school..
😂😂😂
Cap Tangent and his battle against... sin-ners... I'll go back to my closet now
I love the blooper reel!
Ben, you could use a different esp8266 module with all gpio. Like the esp-12f
Or the ESP-WROOM-02 which has 11 GPIO pins available. Of course, many are multi-purpose, so it all depends upon how you use the chip.
::While testing speaker mounts for belt:: "That won't look TOO dorky..." best quote.
Love the out takes :)
"I haven't heard anything that bad in all my years of selling light-bulbs." Ahahahahahahah! :'D
Ben why didn't you use a more powerful processing chip to receive the data?
Would it work better because it would export the data better?
can you please make a parts list and where to buy everything and the 3d printing stls please because I love your show and im really interested into making one of these little pi laptops you gave away
Are you looking for the files for this build or a different one?
When we post build files, you can find them on the element14 Community here. bit.ly/2dcULuo
Why use those old ESP-1 modules? ESP-12 modules have 15 I/O pins, they are no bigger than those ESP-1's, have more flash, and cost only pennies more!
Make a steam portable handheld with the steam controller and steam link. Portable means portable battery and handheld as in I can hold it like a 3ds or vita
I wonder if there's a simple piece of code that looks at the accelerometer numbers then you can just say "capture right punch" or whatever action you want to call it, then do the motions and just hit spacebar at the same time the action happens and it will look at the numbers a few ms before and after the spacebar press and average/smooth it out. Then when it sees those same numbers it will show that action and even give you some numbers to punch into your arduino sketch.
I don't know if it can be considered 'simple', but I'm fairly sure tools like that exist. I remember mention of stuff like that being among the tools they gave to Wii game developers.
As in, you'd hit record, do a motion, and the program would relate the sensor readings you recorded to an action. Then every time the software recognised that sequence of motion inputs, it would perform the related action.
Unfortunaly I don't think (from experience with the games) it was that easy to set this up to work reliably, plus the software involved is anything but simple. (involves neural nets, pattern recognition, learning algorithms and the like. Nasty, complex, hard to understand stuff a lot of the time).
I had that same flickery data problem with a Wii nunchuk, I don't quite remember but i think i fixed it by using a different voltage to the sensor.
Why not use an Esp8266-12E or 12F for the upcomming project? It has more gpio's and a bigger flash memory.
"Regrettable acting" at it's finest! :-) Love it guys!! LOL.
Oh gosh, that was fantastic!
I wonder could you use a 74HC152 driven via a Johnson counter based on the 74AC74 operating as a double balanced QSD modulator to make your voice scary the Oscillator will have to be LOx4 so if you want 12khz carrier then it is 48khz that is used to drive the Johnson counter, A TI DSP chip should be able to do what your wanting and then interface the DSP chip into a FPGA chip programmed to do the other tasks you required done.
accelerometers do NOT detect speed, but changes on speed with time; i.e. acceleration.
I love that mug!
Haha I LOLed so hard on the ending scenes
Can you put a switch on it so you can have Ben say "pow!" when you punch like he is doing when explaining it. Like comics.
Boy Meets Girl - Waiting for a Star to Fall. It is a song.
should have bought a simple mechanical full bridge accelerometer package. put three on a small block and you a full axis accel.
Yay, shout-out to Macrofab!
You guys should do a collaboration video with C. Church. Build a smart dry-aging cabinet together so you have an excuse to eat steak and drink beer.
Let's hope the magnets in the speakers don't screw with your magnetometer readings!
How are the plants doing?
The one in the bathroom died. :(
holy crap I bought 10 of these wifi modules for that exact same reason!
I'm hyped.
I must have that IT Crowd t-shirt. Or one like it.
I loved that shirt.
I'm going as a recolor of Alucard from Castlevania SotN, and Aeon from Castlevania Judgment
my son needs this!
nice drawing
cool
Good video.
im not going to lie but i could care less about this but you have spoiled me with the Playstation prototype episodes! when are you going to install the cd reader? once completed then i will return to caring about the episodes again
0:20 looks exactly like my handwriting
Wait. Karen's outfit is missing something crucial: A piece of tape.
Cool drawing, btw. Did she do it?
That was all Felix!
theHeckwithKaren
Really nice. Congrats to Felix!
Just use a ESP-07. They cost like a dollar or two...
Could you use a micropython dev board sometime? :)
Spooky!
ua-cam.com/video/q6-ZGAGcJrk/v-deo.html
That's my favorite jam! 😜
Going back to school?
Sooo.... UA-cam Heroes is now a reality?
Gotta say, the layer splitting on that print was pretty bad. :/
I used an mpu6050 for a bowler hat project. Posted a video if anyone is interested.
Cool, I love making hats for Halloween.
My first ever was a beanie with a real spinning propeller.
A Jester hat with RGB's inside ping pong balls instead of bells on the ends.
I've done a top hat with spinning POV kit that creates floating text around the hat (that one has a video on my channel).
Another top hat with a couple of moving eyes and small alien type fingers coming out of the top with green backlighting.
If I get it done this year, I plan on converting an old hard hat into a "Thinking cap"
featuring; WS2812 RGB's inside the hat for a glowing effect, fake amplifier tubes w/ lighting mounted on top, e-cigarette and air pump as a fog machine inside the hat, some kind of energy drink piped into hat with a glowing hose (lit from the end with an LED). Also looking at adding a backlit LCD screen to print out thoughts or hat status.
Waiting for a Star to Fall by Boy Meets Girl
why so less comments?
A lot of cringe related deaths :D
3 spooky 5mine
Karen - you star - Go IT Crowd!
ua-cam.com/video/kgF7Ewbvnh8/v-deo.htmlm48s
.
61st
10th Comment