Series 16 Feast Automatic Fish Feeder User Guide & Set Up

Introducing the Series 16 Feast Automatic Fish Feeder!
Join us at Aquarium Central for a guide on how to use this convenient tool for aquarists. Whether you're going away on holidays, or just want to spoil your fish while you're at work, the Feast 16 has you covered with 16 individual food compartments & multiple scheduling options. Get yours now at: aquariumfishonline.com.au/pro...
How to set up the 24hr clock on your device:
Skip to 3:13 or read below for step-by-step instructions.
Step 1: Switch on your automatic feeder by pressing the power button (top left).
Step 2: Hold down the middle button underneath the display screen that looks like a cog. Hold until the hour of the 24 hour clock begins flashing on the left side of the display screen.
Step 3: Now, set the correct hour by pressing the up (left) or right (down) buttons which are located under the display screen either side of the cog button. For example if it was 3pm, press the up/down buttons to reach hour 15 on the display screen.
Step 4: Once the hour is correct, press the middle cog button to lock in this selection. Notice the hour will stop flashing, & instead the minutes of your 24 hour clock will begin to flash ready to be set.
Step 5: Again, use the up/down buttons to reach the correct minutes for the time & lock it in by using the cog button. The minutes will now stop flashing, & instead the first blank feeding time slot will begin flashing on the right side of the display screen ready to be programmed.
How to program your feeding schedule & number portions:
Skip to 3:53 or read below for step-by-step instructions.
Step 1: Once the first blank feeding slot is flashing on the top right of the screen, press the up/down buttons to reach the desired hour for the first scheduled feed. Once the correct hour is found, press the middle cog button to lock it in & set the minutes.
Step 2: Now the minutes for the first scheduled feed will flash & again use the up/down buttons to find the correct time and the cog button to lock in.
Step 3: After the correct time for the first feed is scheduled, the number of portions delivered can be chosen.
Step 4: Again using the up/down buttons select 0, 1, 2 or 3 portions to be delivered (shown by small dots next to the timing slot) & lock in your selection.
Step 5: Now the next blank time slot will begin flashing and the process can be repeated.
With 3 potential feed times & up to 3 portions delivered , there really is numerous scheduling options that are completely up to you!

[@gracee.leepharmd7989]

Thanks! I lost the instructions so this video was helpful in setting it up!

[@AquariumCentralOnline]

So glad we could help! :)

[@acuatruco2294]

Prueba a mantener presionados al mismo tiempo haciendo un clic el botón de flecha arriba y flecha abajo. Entonces seleccionarás en los días en los que no da de comer y los días en los que si da de comer.