Thank you for these tutorials! Oddly, ToeH if brought down as a parameter override and changed from the library default, messes up the z position of the partition when changed from ToeH=4-0" to 3-1/4". In the case of lowering ToeH to match an adjoining cabinet with casters where I lose 3/4", I am now debating blocking the casters up 3/4" vs. trying to figure out how to get my overridden ToeH recognized so I can parameterize the entire build. I've also seen instances where parameterized W or L is not picked up on a formula for 3D position, rather Mozaik seems to use the default W or L prior to parametric modification. But not always. Perhaps a bug or operator error?
Nic, this is a great tutorial. The only thing I am missing is the screw hole for partition into the stretcher. I have the screw hole from the exterior of the cabinet into the bottom drawer stretcher, just not one from the divider into the bottom drawer stretcher like in your video. What did I miss here?
Is there a way to quickly mirror this build on Mozaik so I don't have to build the same cabinet from scratch to have the door on the other side of the cabinet?
It looks like the drawer head is attached to the drawer box with Lamello Cabineos, is that right? I have been looking for a good way to do that easily for a while now, would you be able to share how you did that?
Thank you for these tutorials!
Oddly, ToeH if brought down as a parameter override and changed from the library default, messes up the z position of the partition when changed from ToeH=4-0" to 3-1/4". In the case of lowering ToeH to match an adjoining cabinet with casters where I lose 3/4", I am now debating blocking the casters up 3/4" vs. trying to figure out how to get my overridden ToeH recognized so I can parameterize the entire build.
I've also seen instances where parameterized W or L is not picked up on a formula for 3D position, rather Mozaik seems to use the default W or L prior to parametric modification. But not always. Perhaps a bug or operator error?
Thank you so much. You have truly helped me.
Great to hear!
Nic, this is a great tutorial. The only thing I am missing is the screw hole for partition into the stretcher. I have the screw hole from the exterior of the cabinet into the bottom drawer stretcher, just not one from the divider into the bottom drawer stretcher like in your video. What did I miss here?
thank you
Glad you like it!
Instead of modifying the short partition length, could you flush the horizontal separator to the bottom of the front face split?
How do we add fastners to the panel? I use Rafix20. I can't seem to find the option to connect end to panel, or panel to stretcher, panel to bottom.
Is there a way to quickly mirror this build on Mozaik so I don't have to build the same cabinet from scratch to have the door on the other side of the cabinet?
Yes...right click on the cabinet...select mirror...you will have to redo the blind panel but everything else should stay.
It looks like the drawer head is attached to the drawer box with Lamello Cabineos, is that right? I have been looking for a good way to do that easily for a while now, would you be able to share how you did that?
Sure thing... shoot me an email at nic@frostcnc.com