Nice and i would like to try it myself can i use any type of epoxy resin or is there certain types?? And if there is which ones would you recommend me?? For a first timer. Thankyou .
Could you get the glowing particles suspended if say you poured in some resin, then some powder, then more resin, and used a pin or paperclip to stir it up? Great video!
Patrick Domenici your idea would definitely work depending on the type of glow powder u get but you'd have to make sure to get a very fine powder otherwise, like the other person said, it would sink. Though the larger the particles in the glow powder the better the glow. Is definitely a good idea though for sure! 👍
1. You should have an online store. 2. And I'm sure that if you talk during the video, to make it more human and personal, this channel would have more than 1M subs.
Also the song is VERY bad. Maybe you could find some nice ones at UA-cam Songs Channel. And I agree about talking, or alternating between silence and some sound. But these songs with samples and chipmunks singing are really annoying
It’s not rocket science, if your hung up on the safety then you should wear PPE according to the tools you’ll be using,, Well done, Beautiful - thx for sharing 👌🏻
Thank you for your care :-) I also think that you have to be attentive, but sometimes the process of filming (showing the technique) enforces such careless movements.
Just like any project you will need to search for “ Resin jewellery Making for beginners “ to see the safety or just wear suitable PPE.. it’s not rocket science
I guess you should look for a drill number which fits on you, or the hands it will be sporting. Also you should try to make the inner walls thinner , so is more usable
I also find his method very quick and practical, although kind of dangerous (not wearing a mask, because ripping off a finger with a angle grinder is not that easy) But I think that going fast sometimes calls for jumping sandpaper grits. I've done some work like that myself (not a ring) and used concrete (a flooring) as a coarse sandpaper, to get the shape effortlessly and quick. It worked, but it left some deep "channels" on the resin, that interferes with the best polishing finish.
Burn through it. If you lack resources use a metal coat hanger and heat it with a torch. If you don't have a torch your cook top. Heat the wire and burn straight through the wood. Do this in a circular pattern (perforated) until you can snap out the waste. File or sand until smooth. Be safe and have precautionary measures standing by.
Espetacular! 👏👏👏
It's really fun when you don't know how it's going to come out. Pretty!
Thx ;-)
So Beautiful! Do you sell any of your work?
Amazing!
Thx :-)
Love these! I am going to try to make one myself. Can you tell me where to purchase the tiny long handle scoop! Thank you!!!
Beautiful work of art. Can you please tell me the name of this song? Love the mix.
muito bom.....ótimo....!
Nice and i would like to try it myself can i use any type of epoxy resin or is there certain types?? And if there is which ones would you recommend me?? For a first timer. Thankyou .
Aw, beauty 😊
Thank you :-)
Wow so cool!
:-) thx
Your handmade everythings its very awesome ..
I subscribed you and see every vedios and give you comments...
+Jhelum Panjab thank you very much!!
Parabéns muito lindo
Gracias :-)
Obrigado **
What kind of paste is used to polish? Thank you
Do you have a link for the glowing particles you used?
cool!!
Thx :-)
Could you get the glowing particles suspended if say you poured in some resin, then some powder, then more resin, and used a pin or paperclip to stir it up? Great video!
Thx for comment. FYI: this glowing powder - falls down.
Smart Beast - It might work if you let the previous layer dry... not sure tho. Great video btw.
Yep! ;-)
Patrick Domenici your idea would definitely work depending on the type of glow powder u get but you'd have to make sure to get a very fine powder otherwise, like the other person said, it would sink. Though the larger the particles in the glow powder the better the glow. Is definitely a good idea though for sure! 👍
what wood use?
Como se llama el polvo blanco que usas para que brille el anillo?
I suppose I like a secretive theme to jewelry.
Which drill u used?
綺麗(*^^*)
暗闇で光るの神秘的✨
:-) Thx
Wonderful
Thank you !
hello your work is beautiful at the same time as original you could tell me which are the materials especially the shine powder?
Thx, The name of this powder is "glow powder" -the brand is not important - buy any ;-)
beautiful...where do you get glow powder?
Ebay
What is the material you are using for the mold. Is it glass? TYIA for your time and the video.
It,s plexiglass - acrilic glass!
So you didn't bust the first piece of wood to get the peaks? That's cool
wow! and the glow powder seems soo bright OMG ! could u give the glow powder link?
lmgtfy.com/?q=glow+in+dark+powder
lol i meant to know your specific brand of glow powder since most of the glow powders aren't that bright..
Buy any - they are not different ;-)
😍😍😍😍👏
😚
Is there a way to buy these products from you?
Cause i have no chance of getting the stuff needed to create that in my country.
Creepy Mouse Look on Etsy or Amazon! What Country are you in?
you can find Epoxy Resin pretty much everywhere.
1. You should have an online store.
2. And I'm sure that if you talk during the video, to make it more human and personal, this channel would have more than 1M subs.
+Bryan Martinez thx for sugestion :-)
The brand "Secret Wood" Already exists. They create these rings and other peices of jewellery too.. (assuming he isn't the owner)
Also the song is VERY bad. Maybe you could find some nice ones at UA-cam Songs Channel.
And I agree about talking, or alternating between silence and some sound. But these songs with samples and chipmunks singing are really annoying
It’s not rocket science, if your hung up on the safety then you should wear PPE according to the tools you’ll be using,,
Well done, Beautiful - thx for sharing 👌🏻
Are these epoxy resin same with those flooring resins?
No, Flooring resin is less transparently and less glossy. It's a casting resin.
Cómo se llama los materiales que se ocupan
What kind of plastic did you stick around the wood to pour the resin into?
Plexiglass
bikin apaan itu kawan salamkompak dari sumedang ya
wow,so got
:-)
Beautiful ring. Can you tell me where you get the wood and the kind of wood? Thanks
Hi, In this project I use oak wood. I always finds a piece of dry twigs or an old board.
Thank you for replying. Can the oak be purchased at a home center? Twigs around my house, nothing I could use for this ring.
Use a popular type of wood in your area. You can use a piece of old furniture. Flea market? Cheap.. wooden hanger ;-)
Thank you :)
You are welcome :-)
Would you make me a couple of these?
Can you tell me what kind of resin you used in this video, i mean brand
Epoxy.. atoxygen.com
Nice videos, but i'd like to see a bit more emphasis on safety!!! I don't think that I have to point out the dangers here...
Thank you for your care :-) I also think that you have to be attentive, but sometimes the process of filming (showing the technique) enforces such careless movements.
Just like any project you will need to search for “ Resin jewellery Making for beginners “ to see the safety or just wear suitable PPE.. it’s not rocket science
How shop to website
Wonderful... But dangerous
Do you own the brand "Secret Wood"?
Hey man, what's that song name? Credits in description maybe?
Blacksixki Tule...together
fishtank5050
V.I.P right here bro. Thank you
Nice, but you really need to spend some money on a couple clamps
what size is that piece of wood ? and whats that Drills number ? TNX
I guess you should look for a drill number which fits on you, or the hands it will be sporting. Also you should try to make the inner walls thinner , so is more usable
Song???
"Worst Song Ever" by Worst Sampler In the World. Or "Agonishing Shipmuncks with a Robot Repulsive Snare" by Make me Deaf , I'm not quite sure
You see, this guy gets it. Why use a sanding belt to get the rough edges off when you can shave it off with an angle grinder like a mad man.
You save a lot of time and lungs (dust) ... do as you like. Thx 4 complement.. mad man ;-)
Smart Beast Happy to help broheem.
Absolute.. MAD MAN
I also find his method very quick and practical, although kind of dangerous (not wearing a mask, because ripping off a finger with a angle grinder is not that easy)
But I think that going fast sometimes calls for jumping sandpaper grits. I've done some work like that myself (not a ring) and used concrete (a flooring) as a coarse sandpaper, to get the shape effortlessly and quick. It worked, but it left some deep "channels" on the resin, that interferes with the best polishing finish.
dude what’s the name of this song??
David Brooks Tule...together..
Does anyone know a way I can make the hole without a powertool?
+LI Xinyu meybe this method will be good 4U ua-cam.com/video/QSdQgfwHOhw/v-deo.html
LI Xinyu, you could use a hand awl.
Burn through it. If you lack resources use a metal coat hanger and heat it with a torch. If you don't have a torch your cook top. Heat the wire and burn straight through the wood. Do this in a circular pattern (perforated) until you can snap out the waste. File or sand until smooth.
Be safe and have precautionary measures standing by.
Use ring or pipe.. ua-cam.com/video/QSdQgfwHOhw/v-deo.html
do not use handgrinder without protector
you're right ;-)
Co za drewno?
Are this for sale?
no ;-)
Song name by any chance?
DRSpaghetti Tule...together
Your wrist watch seems a little bit tight
It's OK :-)
This cracked me up for some reason lol
Love the video but the music was horrible
sorry
Thumbs up for the nice work on that ring, 2 thumbs down for that gay ass, cringy so-called music that ruined the whole video.
yep. worst song ever