That was one of the best tutorial that I've seen. Well presented, without errors, nothing hide, so many details, congratulations my friend!! Please don't stop your work here!!!
Hi Sir i have question how can i control relay manualy and using automation? for example, control relay to turn on/off fan using webserver and using TTP223 touch sensor, i tried and it doesnt work together i can only use 1 of that for control relay
Hello great video! But I am wondering, if it is possible to make real time charts showing actual values and alao historical data, also presented by charts and available online anywhere. Example project: weather station, electricity metter.
@joedgoh Its amazing video brother.. I need to know that if we wanna add soil moisture sensor along with the same project and set the specific range so the motor should start automatically. Is it possible to do? and how can we achieve this. If you add it in the same project then it will be a great help and I will really appreciate. Thank you
Hello, thank so much for this video but i wanted some help. Can i just make the code on arduino ide app then store the data on firebase and at the same time represent this data of iot cloud or any web or mobile app? if so can you give me advice me how to do it.
sir pwedi po ba ako makahingi ng tulong? pano po kaya gamitin yung float var? para po sana sa PRM monitoring na illink sa Gauge.. bale ang concept po na naiisip namin PWM signal ang essend para ma recognise at makasend data dun sa gauge. kaso di po namin alam pano gamitin ang gauge nung IOT para maka read ng PWM signal po,. badly need your help sir para sa thesis ko po sir , kinulang po ksi sa data sa thesis po ito po kulang namin. sana sir ma tulungan mo po ako
Hi Very good video. I was not very clear why you connected the ESP32 ground to the external 5 V supply gound. Please explain the logic. can the motor work with this ground connection. Thanks
It is just so happen that my motor and my relay are both 5VDC, so I used the same external 5V supply. For the relay module to work, it requires 5V, but it must be of common ground to the rest of the circuit. If in case you have a motor that operates on a much higher voltage (ex. 12v, 24v, etc), use a seprate supply to it and DO NOT connect its ground to your circuit. It should be separated and only connect it to the output side of your relay.
Sir i need one help how to modify and write code with DHT sensor and relay. Whenever the temperature is reaches above 35° then the relay will On state,and whenever below 35° relay will Off state. Also monitor in Arduino iot cloud platform using esp32. Please help me sir...
I am trying to use MAP of arduino iot cloud But it's showing latitude 0 and longitude 0 As they are initial values What changes in code are expected for proper location ? Thank you...
i tried the same method but im unable to switch on and off the led. when i connect my esp32 to wifi the relay automatically turn on the led without me toggling the on/off switch
if I want to use one dashboard that can be controlled by many let's say 5 people ...if person A turn on the LED the next day Person C turn On the same LED...how do I make it ...if I have to share a password with others but how do I know that person C turn it on ...
great project, well presented, I am a newbie at this and I was able to get this working first time. I have tried but failed to implement the esp deep sleep code as I want to run the project on batteries (just the temperature side) any thoughts would be great. Thanks Alan
Hello sir, beginner here. I did all your steps right before uploading sketch. ufortunately, it can find any device associated with it. so it fails to upload the code. My model of esp32 is wroom-32. I selected that but it still dont work. Please help
Yes I did sir. Thank you for replying. I already figured out why. Why computer doesn't recognize the esp32 so I have to install the drivers to it. I just love this work, troubleshooting problems until you make it work is the best feeling. Ive met many more issues but fortunately, I found way out. Like when I added an i2c lcd to it to show the values of temp and humid. I also configured few of the codeds that make it automatic to turn on the fan whenever a threshold of temp is reached. Again thank you, and hopefully, I can accomplish my project using esp32. Keep doing a great job sir!!!
@@joedgoh Hello sir, Can you actually automatically turn on the motor and LED switch if the temperature and humidity level reaches a threshold? for ex. if temp >= 32, the fan turns on, and turns off when it gets lower than that? thank you!
Make sure that the device id and security key are correct. Also, make sure that your esp32 can connect to the internet properly (correct wifi credentials) troubleshoot these areas.
hello, how did you fix it? im having the same kind of problem. same model rin po ng esp32. what model did you picked in iot cloud? tried the esp32-wroom-da module & esp32 dev module same offline :
That was one of the best tutorial that I've seen. Well presented, without errors, nothing hide, so many details, congratulations my friend!! Please don't stop your work here!!!
Thank you! 🙂
The best tutoriel i've ever seen!
Thank you!
Well Done. I enjoyed your video very much. Everything is nicely explained. Congratulations !!
Thank you!!
Thanks for such a detailed tutorial.
Thanks and Welcome!
Your tutorial is very clear!
Thank you!
in this project what about data ...everytime we turn it ON or OFF ...is there any place the data save
Hello , Nice explanation !!, A quick question . The 5V DC Relay is controlled by a ESP32 3.3 V Pin voltage. Is this oK . Thanks
Controlled by 3.3V but powered by 5V DC adaptor. Thanks
Thanks @@joedgoh
Welcome
Very nice explanation. Thank you.
Glad it was helpful! Thank you
can you make a Iot cloud with esp32, capacitive soil moisture, dht22
great teching sir..resfect thank very much
Thank you!
Thanks for the great video
You're welcome. Thanks!
Great vídeo. Thank you for that.
Thank you!
Very clear and Extra ordinary tutorial ! Thank you !
Thank you
Thank you so much, this video was very helpful and really well put together. Maraming Salamat Po!
Hi Sir i have question
how can i control relay manualy and using automation?
for example, control relay to turn on/off fan using webserver and using TTP223 touch sensor, i tried and it doesnt work together i can only use 1 of that for control relay
Hello great video!
But I am wondering, if it is possible to make real time charts showing actual values and alao historical data, also presented by charts and available online anywhere.
Example project: weather station, electricity metter.
Yes, there is a widget for that. However, for the free account, only 1 day data retention. You need to upgrade for historical data.
Great video thank you. I can’t get the arduino connect to see my ESP32. Any idea?
@joedgoh
Its amazing video brother.. I need to know that if we wanna add soil moisture sensor along with the same project and set the specific range so the motor should start automatically. Is it possible to do? and how can we achieve this. If you add it in the same project then it will be a great help and I will really appreciate. Thank you
Thanks. How to choose esp wroom 32 (30 pins) for IoT projects ?
It does not exist on the board options.Which board I need to choose from the list ?
uPesy ESP32 Wroom DevKit
If i use 12 volt battery supply how much value of resistor that i have to use and also i use 12 v dc motor and 0.3 A
can i use Arduino UNO and ESP8266 instead of ESP32 ?
Great work sir thanks
Excellent tutorial!
Can you please make video on Arduino cloud iot and x9c104 digital potentiometer
What is the range for connecting esp32 via wifi ?
Hi, the instruction and sketch is clear on your channel. Could you provide the code for dimmer light, thanks
Pls email me. joedgoh@gmail.com
I love this channel! It is clear and the purpose is true, education is life
Thank you for the support 😃
Hii sir
Thanks a lot for such a beautiful lesson
Education is life.......
full editor option is not showing ...
Can I use esp32 cam?
Hello, thank so much for this video but i wanted some help. Can i just make the code on arduino ide app then store the data on firebase and at the same time represent this data of iot cloud or any web or mobile app? if so can you give me advice me how to do it.
Thank you! The answer to your question can be found in the succeeding lessons:
ua-cam.com/video/aO92B-K4TnQ/v-deo.html
Plz make Ac fan and Ac light dimming feature😢
sir pwedi po ba ako makahingi ng tulong? pano po kaya gamitin yung float var? para po sana sa PRM monitoring na illink sa Gauge.. bale ang concept po na naiisip namin PWM signal ang essend para ma recognise at makasend data dun sa gauge. kaso di po namin alam pano gamitin ang gauge nung IOT para maka read ng PWM signal po,. badly need your help sir para sa thesis ko po sir , kinulang po ksi sa data sa thesis po ito po kulang namin. sana sir ma tulungan mo po ako
Hi Very good video. I was not very clear why you connected the ESP32 ground to the external 5 V supply gound. Please explain the logic. can the motor work with this ground connection. Thanks
It is just so happen that my motor and my relay are both 5VDC, so I used the same external 5V supply. For the relay module to work, it requires 5V, but it must be of common ground to the rest of the circuit. If in case you have a motor that operates on a much higher voltage (ex. 12v, 24v, etc), use a seprate supply to it and DO NOT connect its ground to your circuit. It should be separated and only connect it to the output side of your relay.
5 volt dc is safe for esp32?
Sir i need one help how to modify and write code with DHT sensor and relay. Whenever the temperature is reaches above 35° then the relay will On state,and whenever below 35° relay will Off state. Also monitor in Arduino iot cloud platform using esp32. Please help me sir...
" Executing command: exit status 2
Upload started "
Why this error is showing?
I am trying to use MAP of arduino iot cloud
But it's showing latitude 0 and longitude 0
As they are initial values
What changes in code are expected for proper location ?
Thank you...
Is the software need to purchase first before upload into esp32?
No. You can use it for free (limited to 2 things only).
Hay man good job, I appreciate what you are doing, can you please write for us the cod for brightness led, I tried alot to do it but I fell😢
amazing work, its very helpful for me , thank you very much !
Hello sir, Thank you for the lessons, I tried the same code but mine is not working, what do i do sir....
Can u please share the code
Pls email me. Thanks!
@@joedgoh I did email sir
Hello, student here! May i know the code. We'll use it for our project. Thanks. It will help Alot!
can I do the same project with Solar panel and battery instead of the power supply as a smart home energy management system?
Of course, you can. Thanks!
Hello Sir, can you please provide circuit diagram for this project please? @@joedgoh
i tried the same method but im unable to switch on and off the led. when i connect my esp32 to wifi the relay automatically turn on the led without me toggling the on/off switch
Set the default value as 0 or low
Your esp32 always showed as offline. At what point did you bring it online.
Thanks.
Sometimes the icon doesn't update to online, but it is.
thank you very much buddy
Welcome!
Sir can you please provide the code for the same, i did email you.
I tried to turn on the LED but I could not. How can I know that the ESP32 is actually connected to the WiFi.
Please watch this previous lesson to learn about ESP32 Wi-Fi. Thanks!
ua-cam.com/video/rw_1E-2Dwrs/v-deo.html
I could fix it thank you!
if I want to use one dashboard that can be controlled by many let's say 5 people ...if person A turn on the LED the next day Person C turn On the same LED...how do I make it ...if I have to share a password with others but how do I know that person C turn it on ...
Thank you Sir God Bless
Thank you
can I use esp8266 instead esp32 cam?
It depends on what purpose. ESP2 cam has a specialized purpose highlighting the integrated camera while esp 8266 doesn't have.
How do i do this with a 12v pump?
The same principle I used in my example. Instead of external 5v, use an external 12v supply
No Associated Device Found. Can you please help me sir?
I have same problem
do you have a block diagram for that?
For what?
Thanks Sir
@@joedgoh of the entire connection
great project, well presented, I am a newbie at this and I was able to get this working first time. I have tried but failed to implement the esp deep sleep code as I want to run the project on batteries (just the temperature side) any thoughts would be great. Thanks Alan
tanks for video
Thanks!
Hello sir, beginner here. I did all your steps right before uploading sketch. ufortunately, it can find any device associated with it. so it fails to upload the code. My model of esp32 is wroom-32. I selected that but it still dont work. Please help
Did you select the same board I am using in my video? esp32 dev module?
Yes I did sir. Thank you for replying. I already figured out why. Why computer doesn't recognize the esp32 so I have to install the drivers to it. I just love this work, troubleshooting problems until you make it work is the best feeling. Ive met many more issues but fortunately, I found way out. Like when I added an i2c lcd to it to show the values of temp and humid. I also configured few of the codeds that make it automatic to turn on the fan whenever a threshold of temp is reached. Again thank you, and hopefully, I can accomplish my project using esp32. Keep doing a great job sir!!!
That's great. Good to know! 🙂
@@joedgoh Hello sir, Can you actually automatically turn on the motor and LED switch if the temperature and humidity level reaches a threshold? for ex. if temp >= 32, the fan turns on, and turns off when it gets lower than that? thank you!
Of course, a simple if condition in your Arduino code can do that.
Thanks a lot teacher,good work..do you hsve an e mail to contact with you?
Can we use Arduino Mega for this project instead of ESP arduino?
joedgoh@gmail.com
ESP32 is different from Arduino microcontrollers. You can use Arduino mega but the built-in wifi is ESP8266.
@@joedgoh thanks a lot sir, i will send you later an email about my project planning to do.
Ohhh, free wifi! Don't think it'll reach all the way to Europe though. :p
Nice
Hello sir how are you how can I contact with you please
It is in my About tab. Thanks
@@joedgoh I did not find a way to communicate in information about the channel
@@joedgoh Hello, I want to Arduino course, can you help me
joedgoh@gmail.com
mine is not working, it is offline. the esp i am using is esp32-WROOM-32. what specification do I need to select sir?
Make sure that the device id and security key are correct. Also, make sure that your esp32 can connect to the internet properly (correct wifi credentials) troubleshoot these areas.
@@joedgoh sir okay na po, na solve ko na din po ang issue. thank you very much sa very imformative nyo pong pag tuturo
@@joedgoh Sir I had sent you an email, since I would like to learn more from this topic, if you dont mind Sir.
Yes.. you are always welcome
hello, how did you fix it? im having the same kind of problem. same model rin po ng esp32. what model did you picked in iot cloud? tried the esp32-wroom-da module & esp32 dev module same offline :
can I use esp8622 instead of esp32?
You can use esp8266