Dude your an absolute wizard and this has been monumental in helping me plan out my audio setup in my 20’ STI. Thank you so much for making all of these audio related videos.
2015 STI install notes: (appreciated your video very much! I just installed one and thought I would share a couple notes) The bezel is very fragile, I had to drill (open up) the 4 HVAC module holes otherwise they can crack and break using the OEM screws. The top part is even more fragile, I removed the part that holds the hazard and MFD toggle button in place and installed that just prior to final hookup. My first bezel was broken on the top two screw attachment points. Also, to be clear you need to use the OEM antenna. I did not use the iDoing supplied antenna cable. Lastly for 2015 users if you do not care if the reverse camera remains in the MFD and not displayed on the iDoing then just skip that harness all together.
Is there a video or tutorial on how to get the 2015 backup cam to display on HU, even if it displays both. I know you plug some harness into the MFD somewhere but No clue
This is hands down the best video on installing this head unit that I have seen. I just purchased one and it will be installing it this weekend I feel super confident now
Thanks for making this video. One of the best, if not the best in describing the different wiring harnesses. I'm installing an Idoing unit in a 2013 Camry this weekend and frankly, I'm disappointed in the lack of instructions and bad videos out there. Good job!
Hey man, just wanted to thank you for this super thorough install. Literally plug-and-play with your detailed video. The only issue I had is with the backup camera not working initially, but it was a matter of just pushing the OEM connector all the way in. Anyways, dope vid!
@@huhinteresting It's been a while so I don't recall, but for me the issue was that one of the connectors was not all the way in and it wasn't obvious until I rechecked all my connections. Follow the tutorial in the video and make sure all the connectors are all the way in.
Appreciate the solid install tutorial bro. I just finished installing mine. Dumb mistake I made was, the 1 spot I didn't tape, I put a tiny gouge in. Oof. I ran the dual USB to my glove box but neither of the USB cords are working or some reason. Not even charging anything. Maybe the USB connection came loose on the HU. MIght pop it back out on a later date and check that. I also picked up the Metra adapter to retain the center console usb. It goes idoing usb -> metra -> car center console usb. Overall, getting the 10mm bolts out was the hardest part for sure. I used a magnetic 10mm socket - made it much easier to not drop bolts. I got lucky and my model didn't have a starlink module. Mine's a 2016 base with base sound system. It also had the backup cam integrated into the 28 pin.
Absolutely superb video, since this unit doesn't come with instructions they should pay you for this detailed video it absolutely helped me with my rear camera mix up like you described. Thank you and keep making great videos
Thank you, thank you, thank you!!! You did a great job of explaining the extra cables and which ones I wanted to use. I pulled the old unit out and was perplexed with the extra cables, so I put it back together. Now I’m confident I can complete the install.
What a great video, thank you for the information and details you put in this video. So many UA-cam video's out there showing how to install these Android units but never explain in this simplified way. Thank you!
Yeah just saw, thanks for the heads up! I'm fixing to start back up with my own channel (been retiring from the CG so haven't had much time). Hope all is well with fam!
Boost & Shutter, excellent vide as always and super informative! I'll share my experience with a similar (Joying) unit as for the antenna. The plugs provided by this and other aftermarket radios assume the power for the antenna is from the actual antenna connector, it is NOT. Power for all versions of the factory radio antenna is actually from the i35 connector on pin A8 (yellow). I found this out from both my Joying unit and Kenwood radio using the idatalink kit. Both had horrible stereo reception, I eventually found this out using the Service Manual for my car (2019 WRX) and looking at the wiring diagrams. Once I powered the amplified antenna via the correct pin/connector reception was back to normal. I have (had) the base radio but I checked the other versions and they are all the same. Hope this helps!
Good tip, thanks! I’m planning on installing my Joying head unit this weekend. Joying seems to get mostly good reviews, but hardly any specific reviews for WRX/STi version
Great Video man! I like that you went through and explained what each cable does. I ended up getting another brand off amazon and they did not send the correct wiring harness. This unit looks way easier. I may have to get this unit instead.
I don't even own this stereo or car but I know I will be referencing your videos when I replace my Crosstrek's radio with a Pioneer soon. Thanks for the upload!
You make the best videos! Extremely detailed and direct. Everything you need to know to do a full install. Hope to see you soon. Saw what happened on IG. Blessings.
Thanks for the video, it’s been very helpful and informative. I just finished installing mine and it’s great! One thing though, you didn’t mention the 2 additional 10 millimeter bolts that need removed from the sides. There is one behind the glovebox to the left, and one down under the steering wheel and to the right. Recommend to use a magnetic 10mill socket and an extension on both. 🤘
Thanks for the detailed steps. My only issue with my install is lining it up. It's either the top is short to the bottom. cant get both to fit properly. any advice? Thanks!
Sorry for the late reply. Yes I was able to by pushing both sides with a little bit of force. Started from bottom and aligned the top and push both sides in.
Ya I struggled with this when trying to finish it, I found multiple posts on the issue saying you just had to give it a bunch of force to push it into place. Once I gave it more force it popped right in
Are you going to post a video about your amplifier installation? Are you skipping the existing speaker wire going to the doors? im very interested in doing the same
2017 WRX and I just installed the head unit. Everything works except I can't change the volume or skip songs. There were some connectors that didn't have any place to go but every other feature works fine. Android auto, reverse cam ect
Great video! I used your guide to install my radio and it works flawlessly! Well almost. I wish there was a good way to keep factory usb/aux locations for the radio but I'm sure I could find something online for that. ALSO, I also have an aftermarket amplifier installed and have alternator whine. You mentioned that you were going to install a aftermarket amp so I'd love to know how exactly you did and some steps to take to make sure everything works well together! Thanks again for helping the community with this video, keep it up!
Awesome video. I want this head unit. The only thing I don’t like is wiring for the GPS and Microphone. I’m not sure how to hide to wires. I saw where you put them but can’t figure out exactly how. Seeing those wires would drive me nuts. Still debating to get this or not.
Thanks for this guide; it was super helpful in getting my installation done. I actually used everything except the dual USB and the extra amp harness. Everything is working except for the mic, for some reason it doesn't pick up anything. Did you have the same issue?
Hi, can you help me? I'm interested in buying the radio, but I have a question and does it keep the 2 original USB ports or are there cables left in the glove box?
thanks for the video tutorial, very detailed. I have installed my unit but the 3 circular airconditioning control knobs are not working and I cannot turn my airconditioning unit on. My car is a MY 21 wrx STI. Do you know why that might be the case?
will these fit direct to a JDM subaru that's got the original Japanese head unit fitted.... which I have to say, I can't read apanese and the sat nave doesn't work for the UK and it only picks up one radio station in the UK too. So I need a replacemnt head unit,,, straight swap.
This is one of the few install videos that get the actual clipping of the plastic bezel in with no problems. One video the top wasn't even clipped in. Since the stock bolt in brackets aren't used that would not be very safe. I assume you aligned all three at the same time before pushing it in?
Here are some tips for putting in the head unit: 1) Make sure the inside is clear so no wires/harness is in the way when you push the head unit in. 2) Align the top clips around the vent bezels first. 3) Once they are all in, place a hand on the surface at the top to keep the clips down and in place while taking your other hand and pressing in the clips at the very bottom. You will have to slightly bend (I know that sounds scary but it's not actually bending the unit) to make sure the bottom clips are aligned in the correct position. 4) After the top and bottom clips are aligned, gently push in the sides of the head unit to pop everything in place. Gently press all around the top, bottom, and sides to confirm it's all in.
Hi, at 16:48 you didn't plug in the green wire to starlink. I just installed the idoing in my 2021 Crosstrek and I'm unable to plug one of the starlink wires in. One of the connection wires comes out the back of the OEM radio where it connects to the starlink module. It appears the idoing radio doesn't have that connection, so now getting emails from Subaru telling me something is wrong?
Hi Keith, it's not going to work. I went back and forth with an idoing customer service representative and they kept insisting this will work with my 2021 Subaru Crosstrek Sport. After the 7 or 8tu email the representative sent me a picture of a Crosstrek OEM radio and the starlink module only had 5 connections. The two are large and the 3 smaller. On my starlink module it had a total of 6, the 2 large and 4 smaller connections. To make an already long explanation short, Subaru has changed the starlink module. It now routes a connection from the OEM radio to the back of the starlink module. I don't know if it's happened for 2021? I simply don't know, but idoing didn't know. I had to return mine and now in hopes of getting my money back.
Do you happen to know the voltage output of the preamp outputs for the iDoing? I didn’t hear you mention it in any of your videos and couldn’t find it online either. Thanks for the help!
I successfully installed this on a 2018 Subaru. However the electronic parking brake light is on all the time. How do I get it to turn off? I read that I need to ground the break wire from the Idoing unit. That's not working.
Been doing lots of research lately about headunits and what to get/how to do it. I sold my old 2006 ranger that I had upgraded with the BOSS audio BE7ACP head unit and its amazing, I loved it. And as it turns out apparently this exact head unit can fit my 2016 WRX but i'd need a ton of wires and connection kits to actually install it. Which I might end up doing, but this iDoing setup seems to be the easiest-hassle free setup out of everything I have looked up. You have any thoughts? Keep the BE7ACP and get the kits to make it work as the old one did or just scrap it and get the iDoing?
I was deadass freaking out about the red yellow white cables. Thinking there was going to be some inside before taking out the stock HU. But nope. 💀 also good to know that telemetry box or whatever works the starlink if I decide to turn that back on
Great video and way helpful. I have a base 18 STI and the speakers sound like garbage. Does this unit help with sound at all? I’m not wanting to upgrade all the speakers yet. Main reason for getting a new unit is for CarPlay. That’s for all ur great videos man.
Thank you for the detailed explanation. This is a great tutorial. I just have one question: I have a 2021 WRX with and I’m planning on getting iDoing unit and after market audio system. What cable should I use to connect amp ignition?
Amazing explanation of the whole setup. Can you make a small video of what route you would prefer now for upgrading sound in subaru wrx/sti?, for example if you have to do from stock. Thanks for these amazing videos. After watching your videos I'm thinking about doing my audio myself as well
I just order this 2 minutes ago. PLEASE BABY JESUS PLEASEEE!!! Let this work correctly and not have issues like certain parts of the radio, steering wheel or back up camera not work. PLEASE FOR ALL THAT IS HOLY 😣😭
Awesome video! Bro I will install kicker oem speakers on my STI. Will this head unit Amplify those speakers?? If so how many watts per speaker? I was between doing this or just leaving STOCK head unit and installing ALPINE INLINE AMP to it to amplify kicker speakers… So I want to know which route would be best?? And as far as SOUND quality which is better… Thanks!
Hey I am installing the idoing head unit into a 2020 WRX and am getting a "no signal" for the reverse but I did attach the 5 pin connector as you showed in this video. Do you have any suggestions?
Make sure that camera pin is connected in the correct spot. For this one, you could mistakenly connect it to one other area. If you are looking at your idoing head unit from the back of it (hard to do when it's already partially installed, I know), the place you want to connect it is in the UPPER RIGHT area (should be a black area). Try that :)
Add me to the list. Anyone ever get this resolved? Idoing had me send the unit back in for a refund. Never received the refund. Repurchased through a US supplier and the same problem is present.
Great video!!! I purchased an Idoing and I have had it for months now however I’m running into an issue with the blue tooth microphone no one can hear me when I try to talk to them. Any ideas?
Great video. I’m planning to change my OEM whole system. In my STI 2021 base model! Ordered already OEM kickers,tweeter,speaker,subwoofer. Is the USB,AUX in the center/arm rest still gonna work if I’m goin to idoing headunit?thanks
@Boost and Shutter - Just got one for my STI and had a pioneer in there before. That one never really worked properly and when I took it off the previous owner has got all kinds of different wires spliced and harness' etc.. I have those 2 grey connectors for the telematics unit, but there isn't one on this current unit. Does that mean I need to purchase a new telematics unit for it to work properly?
Great video as always! I would assume you did a ton of research between the different brands with similar head units for the WRX/STI, what got you to buy the idoing vs the others? Btw, Your timing is perfect! I was looking for a dashcam and then boom you come in clutch with the 70mai, I'm also getting a head unit soon and im very glad you came this route!
I read through some forums and this one seemed the safer one. I was more worried about it getting lost in the mail than anything else 😅 Glad my channel is proving useful!
@@akqjtn I hear ya, iDoing is getting a lot of good opinions, im actually looking at Joying which cough my eye first because it has a physical volume knob, but upon further research I see they have been around for some time and have good reception among their users. Also I noticed they release frequent firmware updates.
Thank you for the awesome video! Finally someone who actually explained the reverse camera wires! I have mine hooked up exactly like u have it in your video, with the 5 pin connection, but I'm still getting NO SIGNAL when I put it in reverse?? Can't seem to figure out what the issue is? 2018 base model wrx sti. Any ideas? 🤔
The harness plug on the right side onto the bottom row the big one doesn’t fit with my stock harness to the idoing stereo ? All the other ones fit expect that certain one.Will I need a adapter or a replacement harness ?
I did exactly what you did especially with my telematics, still getting no audio from my front speakers only bass, could it be a faulty head unit or canbus?
Why wouldn't you need the ground wire? Whoever installed mine did it in a way that whenever I touch the screen, I ground it and static goes away. Not good unless you're always touching it.
I watch your install video and it was on point. The only thing did not work on my head unit is there is no sound coming out when using bluetooth for my music and calls. Do you know why? Or is there anything I have to change in settings? Thanks!
Great video! thanks for the detailed instructions. I have one question. You didn't re-use the metal install brackets from the OEM unit for the new unit or the telematics unit. Are there alignment issues if you use them?
Dude your an absolute wizard and this has been monumental in helping me plan out my audio setup in my 20’ STI. Thank you so much for making all of these audio related videos.
2015 STI install notes: (appreciated your video very much! I just installed one and thought I would share a couple notes) The bezel is very fragile, I had to drill (open up) the 4 HVAC module holes otherwise they can crack and break using the OEM screws. The top part is even more fragile, I removed the part that holds the hazard and MFD toggle button in place and installed that just prior to final hookup. My first bezel was broken on the top two screw attachment points. Also, to be clear you need to use the OEM antenna. I did not use the iDoing supplied antenna cable. Lastly for 2015 users if you do not care if the reverse camera remains in the MFD and not displayed on the iDoing then just skip that harness all together.
This was so helpful. Thank you sir. Great video as well!
Noticing our main connections are different. I only have 2 as opposed to his 3. Hoping this install goes easy
Is there a video or tutorial on how to get the 2015 backup cam to display on HU, even if it displays both. I know you plug some harness into the MFD somewhere but No clue
I can’t figure out how to get the camera on the screen
I did see one somewhere about how to do that, you need another wiring harness adapter to do it. I'll look around and see if I can find it.
This is hands down the best video on installing this head unit that I have seen. I just purchased one and it will be installing it this weekend I feel super confident now
How did it go? Smoothly?
Thanks for making this video. One of the best, if not the best in describing the different wiring harnesses. I'm installing an Idoing unit in a 2013 Camry this weekend and frankly, I'm disappointed in the lack of instructions and bad videos out there. Good job!
Hey man, just wanted to thank you for this super thorough install. Literally plug-and-play with your detailed video. The only issue I had is with the backup camera not working initially, but it was a matter of just pushing the OEM connector all the way in. Anyways, dope vid!
Did mines today and followed his vid too! I also happend to have an issue with the reverse cam and I still havent figured it out. Which one is it?
@@huhinteresting It's been a while so I don't recall, but for me the issue was that one of the connectors was not all the way in and it wasn't obvious until I rechecked all my connections. Follow the tutorial in the video and make sure all the connectors are all the way in.
The video is hands down the most thorough and well thought out one I have watched. Thank you for taking the time to produce this video !!!
Appreciate the solid install tutorial bro. I just finished installing mine. Dumb mistake I made was, the 1 spot I didn't tape, I put a tiny gouge in. Oof.
I ran the dual USB to my glove box but neither of the USB cords are working or some reason. Not even charging anything. Maybe the USB connection came loose on the HU. MIght pop it back out on a later date and check that.
I also picked up the Metra adapter to retain the center console usb. It goes idoing usb -> metra -> car center console usb. Overall, getting the 10mm bolts out was the hardest part for sure.
I used a magnetic 10mm socket - made it much easier to not drop bolts.
I got lucky and my model didn't have a starlink module. Mine's a 2016 base with base sound system. It also had the backup cam integrated into the 28 pin.
appreciate that you actually took the time to explain all the cables and their uses! very informative, thank you!
Is installing the microphone needed? I believe there is a microphone on the head unit.
Absolutely superb video, since this unit doesn't come with instructions they should pay you for this detailed video it absolutely helped me with my rear camera mix up like you described. Thank you and keep making great videos
Good install. And your side notes are helpful. I always say, 'Don't force it... if you are having to force it, something is wrong'.
Thank you, thank you, thank you!!! You did a great job of explaining the extra cables and which ones I wanted to use. I pulled the old unit out and was perplexed with the extra cables, so I put it back together. Now I’m confident I can complete the install.
What a great video, thank you for the information and details you put in this video. So many UA-cam video's out there showing how to install these Android units but never explain in this simplified way. Thank you!
7:19 I have the same GPS antenna, I fixed it above the glove box, inside the dash. It works perfectly fine and is absolutely invisible.
Thank you. I didn't want to remove the top covers.
Angel! You got a shout out on Schmeedia video on this. Out here making it.
Yeah just saw, thanks for the heads up! I'm fixing to start back up with my own channel (been retiring from the CG so haven't had much time). Hope all is well with fam!
Thank you for the video!! You majorly helped with my installation. You have the best iDoing installation video by far!!
Boost & Shutter, excellent vide as always and super informative! I'll share my experience with a similar (Joying) unit as for the antenna. The plugs provided by this and other aftermarket radios assume the power for the antenna is from the actual antenna connector, it is NOT. Power for all versions of the factory radio antenna is actually from the i35 connector on pin A8 (yellow). I found this out from both my Joying unit and Kenwood radio using the idatalink kit. Both had horrible stereo reception, I eventually found this out using the Service Manual for my car (2019 WRX) and looking at the wiring diagrams. Once I powered the amplified antenna via the correct pin/connector reception was back to normal. I have (had) the base radio but I checked the other versions and they are all the same. Hope this helps!
Good tip, thanks! I’m planning on installing my Joying head unit this weekend. Joying seems to get mostly good reviews, but hardly any specific reviews for WRX/STi version
Great Video man! I like that you went through and explained what each cable does. I ended up getting another brand off amazon and they did not send the correct wiring harness. This unit looks way easier. I may have to get this unit instead.
Glad you enjoyed. Thanks for dropping by.
I don't even own this stereo or car but I know I will be referencing your videos when I replace my Crosstrek's radio with a Pioneer soon. Thanks for the upload!
You make the best videos! Extremely detailed and direct. Everything you need to know to do a full install. Hope to see you soon. Saw what happened on IG. Blessings.
Thanks for the video, it’s been very helpful and informative.
I just finished installing mine and it’s great!
One thing though, you didn’t mention the 2 additional 10 millimeter bolts that need removed from the sides.
There is one behind the glovebox to the left, and one down under the steering wheel and to the right.
Recommend to use a magnetic 10mill socket and an extension on both.
🤘
thanks for the video this really help me out just got done today with my Idoing Android head unit with carbon fiber for my SUBARU WRX 2019 👍
Bro thanks for just taking the time to explain everything
Thanks for the detailed steps. My only issue with my install is lining it up. It's either the top is short to the bottom. cant get both to fit properly. any advice? Thanks!
Did you ever get it lined up? My 2018 is running into the same thing
Sorry for the late reply. Yes I was able to by pushing both sides with a little bit of force. Started from bottom and aligned the top and push both sides in.
Ya I struggled with this when trying to finish it, I found multiple posts on the issue saying you just had to give it a bunch of force to push it into place. Once I gave it more force it popped right in
Are you going to post a video about your amplifier installation? Are you skipping the existing speaker wire going to the doors? im very interested in doing the same
2017 WRX and I just installed the head unit. Everything works except I can't change the volume or skip songs. There were some connectors that didn't have any place to go but every other feature works fine. Android auto, reverse cam ect
Thanks!
Thank you for your tip. Much appreciated!
Thank you for you detail video. I never heard of this brand. Thank you again
Love the step by step instructions. Great install. I have a 2021 STI with Harmon Kardon speakers. Will this unit work on my car?
I'm asking Idoing about that to make sure I don't give you guys false info. I'll pin the comment when they respond.
@@akqjtn they now have one that supports the Harmon Kardon speakers
They answered yesterday, you need an extra CanBus that makes it works. I’ll post the link they sent me!
thanks bro!!! best step by step on YT.
This video deserves more likes!!
Have you figured how to make the stock microphone work with the unit for taking calls?
Great video! I used your guide to install my radio and it works flawlessly! Well almost. I wish there was a good way to keep factory usb/aux locations for the radio but I'm sure I could find something online for that. ALSO, I also have an aftermarket amplifier installed and have alternator whine. You mentioned that you were going to install a aftermarket amp so I'd love to know how exactly you did and some steps to take to make sure everything works well together! Thanks again for helping the community with this video, keep it up!
You can keep the factory usb/aux there is a wire you can buy on Amazon or eBay.
Crutchfield makes an adapter so you can keep your oem usb in the center console. i think it was around $20? so not that bad.
@@cliveosborne8195 que cable es?
Looking forward to part two!! I just installed mine a week ago wondering what would be best EQ settings for sound
Man this looks awesome I definitely want one of these
Awesome video. I want this head unit. The only thing I don’t like is wiring for the GPS and Microphone. I’m not sure how to hide to wires. I saw where you put them but can’t figure out exactly how. Seeing those wires would drive me nuts. Still debating to get this or not.
How do you get the usb under the headunit console to work ?
Great video, I'm still on the fence. Got a 2017 WRX. I'm waiting on the next video to make my decision hopefully this 40% deal stays that long lol
Thanks for this guide; it was super helpful in getting my installation done. I actually used everything except the dual USB and the extra amp harness. Everything is working except for the mic, for some reason it doesn't pick up anything. Did you have the same issue?
Most definitely want this unit. My stock one volume knob does not work and it tends to be off sync with my phone.
Hi, can you help me? I'm interested in buying the radio, but I have a question and does it keep the 2 original USB ports or are there cables left in the glove box?
Hey sorry for the super late replay. No it does not. I learned this the hard way but it provides with new USB cables
I appreciate the work you do brother, thorough and straight to the point.
I need an installation video like this for a 2016 outback.
thanks for the video tutorial, very detailed. I have installed my unit but the 3 circular airconditioning control knobs are not working and I cannot turn my airconditioning unit on. My car is a MY 21 wrx STI. Do you know why that might be the case?
will these fit direct to a JDM subaru that's got the original Japanese head unit fitted.... which I have to say, I can't read apanese and the sat nave doesn't work for the UK and it only picks up one radio station in the UK too. So I need a replacemnt head unit,,, straight swap.
I placed the gps antenna inside the speaker enclosure. There's a perfect spot for it and the reception is not affected.
Could you possibly do an oil pressure gauge Install soon? I love your install videos!
So helpful. Thank you so much!
ur fucking GOAT'd dude, thanks for making these videos. High quality, no bullshit, nothing but helpful.
This is one of the few install videos that get the actual clipping of the plastic bezel in with no problems. One video the top wasn't even clipped in. Since the stock bolt in brackets aren't used that would not be very safe. I assume you aligned all three at the same time before pushing it in?
Here are some tips for putting in the head unit:
1) Make sure the inside is clear so no wires/harness is in the way when you push the head unit in.
2) Align the top clips around the vent bezels first.
3) Once they are all in, place a hand on the surface at the top to keep the clips down and in place while taking your other hand and pressing in the clips at the very bottom. You will have to slightly bend (I know that sounds scary but it's not actually bending the unit) to make sure the bottom clips are aligned in the correct position.
4) After the top and bottom clips are aligned, gently push in the sides of the head unit to pop everything in place. Gently press all around the top, bottom, and sides to confirm it's all in.
Hi, at 16:48 you didn't plug in the green wire to starlink. I just installed the idoing in my 2021 Crosstrek and I'm unable to plug one of the starlink wires in. One of the connection wires comes out the back of the OEM radio where it connects to the starlink module. It appears the idoing radio doesn't have that connection, so now getting emails from Subaru telling me something is wrong?
I’m having the same issue. I believe it’s the blue connector not being connected that’s causing the issue… I have no idea how to fix it either.
Hi Keith, it's not going to work. I went back and forth with an idoing customer service representative and they kept insisting this will work with my 2021 Subaru Crosstrek Sport. After the 7 or 8tu email the representative sent me a picture of a Crosstrek OEM radio and the starlink module only had 5 connections. The two are large and the 3 smaller. On my starlink module it had a total of 6, the 2 large and 4 smaller connections. To make an already long explanation short, Subaru has changed the starlink module. It now routes a connection from the OEM radio to the back of the starlink module. I don't know if it's happened for 2021? I simply don't know, but idoing didn't know. I had to return mine and now in hopes of getting my money back.
@@danlapetina7362 ahhhh ok yeah that makes sense then. 🤷🏼♂️ oh well. Thanks!!
Do we not use the old bolts that held the stock head unit anymore?
Do you happen to know the voltage output of the preamp outputs for the iDoing? I didn’t hear you mention it in any of your videos and couldn’t find it online either. Thanks for the help!
Great vid bro
I successfully installed this on a 2018 Subaru. However the electronic parking brake light is on all the time. How do I get it to turn off? I read that I need to ground the break wire from the Idoing unit. That's not working.
Nice video ! Unfortunately I haven’t been able to figure out how to get my reverse camera working. I’m trying to use the factory camera
Been doing lots of research lately about headunits and what to get/how to do it. I sold my old 2006 ranger that I had upgraded with the BOSS audio BE7ACP head unit and its amazing, I loved it. And as it turns out apparently this exact head unit can fit my 2016 WRX but i'd need a ton of wires and connection kits to actually install it. Which I might end up doing, but this iDoing setup seems to be the easiest-hassle free setup out of everything I have looked up. You have any thoughts? Keep the BE7ACP and get the kits to make it work as the old one did or just scrap it and get the iDoing?
I was deadass freaking out about the red yellow white cables. Thinking there was going to be some inside before taking out the stock HU. But nope. 💀 also good to know that telemetry box or whatever works the starlink if I decide to turn that back on
Where do we connect a aftermarket USB adapter harness to be able to use the center arm rest 2 USB ports? Thank you!
Great video and way helpful. I have a base 18 STI and the speakers sound like garbage. Does this unit help with sound at all? I’m not wanting to upgrade all the speakers yet. Main reason for getting a new unit is for CarPlay. That’s for all ur great videos man.
Sound is 100% better just by changing the head unit.
Thank you for the detailed explanation. This is a great tutorial. I just have one question: I have a 2021 WRX with and I’m planning on getting iDoing unit and after market audio system. What cable should I use to connect amp ignition?
My reverse camera isnt working. Im afriad ive damaged a pin, or have in to the wrong spot
I had mine in the wrong spot. It goes in the upper right hand corner of you're looking at the head unit from the rear.
great video helped out a bunch. Only issue i have is the front speakers only have bass coming from them. Any help?
This is a hard install don't believe he's skilled lol
Hello. I was wondering if there was a spot to plug the oem kicker subwoofer? Didn’t see this mentioned? Great video, trying to tackle this myself.
Did you ever figure this out? Is there one? I’ve been thinking of pulling the trigger on this HU but still skeptical
Yeah there’s like a splitter/adapter where you can plug in the sub then plug into the head unit
Amazing explanation of the whole setup. Can you make a small video of what route you would prefer now for upgrading sound in subaru wrx/sti?, for example if you have to do from stock. Thanks for these amazing videos. After watching your videos I'm thinking about doing my audio myself as well
There's a lot more info in this channel look for some older videos from when he had his WRX. He did a looot on that one.
Did you see my last video before this one? The video description has some links to my WRX car audio videos.
@@akqjtn yes. I'll follow them, thanks for the the amazing content.
Getting no sound out the rear speakers with this new head unit
Just got a 2017 WRX and i'm already thinking this is first thing i'm doing to it
I just order this 2 minutes ago. PLEASE BABY JESUS PLEASEEE!!! Let this work correctly and not have issues like certain parts of the radio, steering wheel or back up camera not work. PLEASE FOR ALL THAT IS HOLY 😣😭
I just ordered mine, how’d it go?
any reason to not get the databus adaptor so you can use the subaru usb ports? Running to the glove box seems a bit hack, no?
great video, thank you
Awesome video! Bro I will install kicker oem speakers on my STI. Will this head unit Amplify those speakers?? If so how many watts per speaker? I was between doing this or just leaving STOCK head unit and installing ALPINE INLINE AMP to it to amplify kicker speakers…
So I want to know which route would be best?? And as far as SOUND quality which is better…
Thanks!
Can you show how you routed your mic and usb? I’m trying to figure out my placement for the usb and how to place my mic in a good spot
Hey I am installing the idoing head unit into a 2020 WRX and am getting a "no signal" for the reverse but I did attach the 5 pin connector as you showed in this video. Do you have any suggestions?
Make sure that camera pin is connected in the correct spot. For this one, you could mistakenly connect it to one other area. If you are looking at your idoing head unit from the back of it (hard to do when it's already partially installed, I know), the place you want to connect it is in the UPPER RIGHT area (should be a black area). Try that :)
Did you ever get it to work? I am having the same problem, and I installed it as in the video.
Add me to the list. Anyone ever get this resolved? Idoing had me send the unit back in for a refund. Never received the refund. Repurchased through a US supplier and the same problem is present.
Update: I ordered mine and now am awaiting delivery. I'm hoping it shows up sooner than expected
Great video!!! I purchased an Idoing and I have had it for months now however I’m running into an issue with the blue tooth microphone no one can hear me when I try to talk to them. Any ideas?
great vid. Followed everything but im getting no sound from my any speaker ? Any tips on how to fix
Great video. I’m planning to change my OEM whole system. In my STI 2021 base model!
Ordered already OEM kickers,tweeter,speaker,subwoofer.
Is the USB,AUX in the center/arm rest still gonna work if I’m goin to idoing headunit?thanks
Awesome, thanks! How does the 2K version differ from this one? Great video
@Boost and Shutter - Just got one for my STI and had a pioneer in there before. That one never really worked properly and when I took it off the previous owner has got all kinds of different wires spliced and harness' etc.. I have those 2 grey connectors for the telematics unit, but there isn't one on this current unit. Does that mean I need to purchase a new telematics unit for it to work properly?
Great video! Did you get rear sound on this? I’m having an issue where everything works but the rear sound, but I followed this guide exactly
Great video as always! I would assume you did a ton of research between the different brands with similar head units for the WRX/STI, what got you to buy the idoing vs the others? Btw, Your timing is perfect! I was looking for a dashcam and then boom you come in clutch with the 70mai, I'm also getting a head unit soon and im very glad you came this route!
I read through some forums and this one seemed the safer one. I was more worried about it getting lost in the mail than anything else 😅 Glad my channel is proving useful!
@@akqjtn I hear ya, iDoing is getting a lot of good opinions, im actually looking at Joying which cough my eye first because it has a physical volume knob, but upon further research I see they have been around for some time and have good reception among their users. Also I noticed they release frequent firmware updates.
Boost & Shutter what phone mount is that by the ac gauges ?
Looking for an answer on this as well!
Thank you so much for such a detailed video. What phone case is that by the unit?
Awesome tutorial! The most detailed instruction so far.
Just have a quick question, will this work on Subaru Levorg 2016?
Whats the mount on the side next to the headunit in the car?
Great video. Do you know any source for crosstrek 2016 premium idoing installation? I’m having hard time with back camera. No signal.
Great video and what phone mount is this?
OLM EZ SUBARU DASH MOUNT FOR PHONES / ACCESSPORT / MORE
I have a 2019 WRX and was wondering if there is anything you can tell me about the CAN BUS decoder. Does it need to be installed?
Thank you for the awesome video! Finally someone who actually explained the reverse camera wires! I have mine hooked up exactly like u have it in your video, with the 5 pin connection, but I'm still getting NO SIGNAL when I put it in reverse?? Can't seem to figure out what the issue is? 2018 base model wrx sti. Any ideas? 🤔
Did you figure this out? Same issue with a 2019 WRX
@@megh9806 idoing actually sent me a replacement unit and then it worked fine. So I guess I got a faulty one. 🤷🏼♀️
sidebar question: what is that mount to the bottom, right of headunit ? i dont like the positioning of the pro clip phone holder.
The harness plug on the right side onto the bottom row the big one doesn’t fit with my stock harness to the idoing stereo ? All the other ones fit expect that certain one.Will I need a adapter or a replacement harness ?
I did exactly what you did especially with my telematics, still getting no audio from my front speakers only bass, could it be a faulty head unit or canbus?
Do I need the gps wire installed or can I just use my phones gps? Is that still relaiable
Why wouldn't you need the ground wire? Whoever installed mine did it in a way that whenever I touch the screen, I ground it and static goes away. Not good unless you're always touching it.
Hey great videos! You educated me so much about the sound system. Does the Idoing HU retain the stock aux input ? Or is it wireless only connectivity?
Thanks for the video couldn’t have done the install without you🙏🏼 where you get that phone mount from though?
Sudispeed...OLM EZ SUBARU DASH MOUNT FOR PHONES / ACCESSPORT / MORE
I watch your install video and it was on point. The only thing did not work on my head unit is there is no sound coming out when using bluetooth for my music and calls. Do you know why? Or is there anything I have to change in settings? Thanks!
Great video! thanks for the detailed instructions. I have one question. You didn't re-use the metal install brackets from the OEM unit for the new unit or the telematics unit. Are there alignment issues if you use them?
I tried to reuse them on mine and the holes didn't line up.
Got everything hooked up along with the starlink unit but my front speakers don't work. Any ideas? Base model 2019 STI