Lol I’m making this right now, I’m almost finished, but it’s taken a few hours lol I’m finished! It took a while, I’ve still got to paint it, but it was super fun to make! With all my stress and anxiety, sometimes I forget that just doing small things like this makes me feel some peace of mind sometimes. It’s even helped me notice how much I can do, and how sometimes my self doubt and hopelessness isn’t always really there. I know, something as small and simple as this seems like a bit of a stretch, but just making something that’s apart of one of my favourite ‘nerdy’ shows is really calming. Since I do these things so little, it makes me want to do more! Thanks a lot! I’m 100% subbing, keep this up man!
The template is Your reference on how to build it you can paste the paper on the cardboard to make it easier to cut (I recommend when you glue it Glue the part with the paper so it doesn’t show) :D
hate to be that guy but the inverted spear of heaven was a 3 pronged blade before one of the shorter sides was broken off so technically that short edge by the handle should be all jagged instead of a clean edge! cool build tho!
Cartón, cuter, goma liquida,cartulina, plumón o lápiz, una tira de papel, muchas más tiras y carton, 2 palitos de madera, pintura plateada, roja y dorada
Hi, i cant really get the blade part of with the thiner sides ,every time i try it just ruins it, can you give a bit nor information on how to make the sides look like that?
@@Absolute-.1.-being the outer layer of cardboard is 2 mm thick and middle one is 5-6 mm, If you have thick cardboard you can also make it by only 2 layer
Hey, I'm currently stuck with the beginning, it just bugs me. Hence, I don't understand; when do you have to use white glue and when do you have to use super glue?
Thanks! This really helps, also I've been kinda struggling to find 5 mm cardboard; I ran out of it on the last craft. Can you tell me where you get yours from, please?
@@DivyanshusCreation what I'm asking is how do you make them like a pdf I wanted to like trace the hilt for this sword but it's hard to get the shape right when I draw it by hand so i wanted to take it from the game and trace it and make it a printable template
@@Goobygreen draw on A4 and click a photo Set canvas of photo shop as A4 Place the photo on the canvas and stretch it so that the Edges and corners of your A4 sheet match the edges and corners of canvas Export as pdf
@@JACK5MILLION-w2f there are few ways to do that You can use a weak adhesive like glue stick to paste the template on cardboard and cut according to the line and at last peel the template off Or you can use Carbon paper to trace back the template on cardboard Or cut out the template then place it on Cardboard firmly then draw the outlines of that cutout on cardboard Hope that helps ☺️
Lol I’m making this right now, I’m almost finished, but it’s taken a few hours lol
I’m finished! It took a while, I’ve still got to paint it, but it was super fun to make! With all my stress and anxiety, sometimes I forget that just doing small things like this makes me feel some peace of mind sometimes. It’s even helped me notice how much I can do, and how sometimes my self doubt and hopelessness isn’t always really there. I know, something as small and simple as this seems like a bit of a stretch, but just making something that’s apart of one of my favourite ‘nerdy’ shows is really calming. Since I do these things so little, it makes me want to do more! Thanks a lot! I’m 100% subbing, keep this up man!
howd it turn out? make a community post on it!
Where did u get the template
I really want one
"There's no way that your six eyes would overlook that finally..." cool diy i love it
ITS SO WELL BUILT JEEZ IM JEALOUS
Brooo this is so cool. You make it incredible 😸
@@リカオット thanks bro 😊
I got all the items and made it. Thank you so much!
Thanks man now I can make the inverted spear of heaven
this is what his inverted spear is made out of, he was too poor to afford a real one and took his cardboard sign to the next level
Fr
That cardboard was able to break in gojo infinite 💀@@Poissoned
Bro dont say he too poor to buy a real one thats a diy so you cant buy a real one to waste your money bruh
@@lancegabrieldatinguinoo4284 I thought we were talking about toji not the guy that made the spear because the spear is cool
You literally play roblox kid so shut up
Bro i did it and i exactly do it perfectly thanks to you man i hope you get famous
@@geto_suguru-y5p I very glad to know that 😊
I really liked your sword, so I made a similar one out of regular paper.
@@EASY-ORIGAMI I am very glad you liked it 😊
you should show us viewers it
Bruh that’s so cool man, I didn’t know that would look so cool made of cardboard
What i have to do with the template
You are either very very stupid or too young to have watched jjk in the first place
Cut cardboard and follow the steps.
The template is Your reference on how to build it you can paste the paper on the cardboard to make it easier to cut (I recommend when you glue it Glue the part with the paper so it doesn’t show) :D
@@worthygains but the thing is he didnt provide any measurements (blade) how do i know it?? or else i cant..
@@neutral_skrrjust eyeball it
If required just take some scaling idea from toji wielding it and comparing the size ratio
ty for the tutorial it took me soo long to fine how to make it bro T^T
hate to be that guy but the inverted spear of heaven was a 3 pronged blade before one of the shorter sides was broken off so technically that short edge by the handle should be all jagged instead of a clean edge! cool build tho!
@@cutdigital yeah I know 🥲
Wait really
That’s cool
amazing work bro 🧡❤
Thanks bro 😉
Very cool
bhai keep it up❤
Thanks 😊
I’m making it right now but it is so hard, anyway it is just so cool.
That is a amazing inverted spear of heaven
Realy cool craft i like it please contikue like that
Damnn it looked sick🔥
Cartón, cuter, goma liquida,cartulina, plumón o lápiz, una tira de papel, muchas más tiras y carton, 2 palitos de madera, pintura plateada, roja y dorada
Genial!!🙌🏻💯
Nice its hard your talented
Thanks bro 😉
Welcome
What colours are used for painting? Are they brush colours?
Yes, they are done by brush
Silver is oil paint rest colours are acrylic 😉
Hello! I want to make a suggestion, how about making the mahoraga adaptation wheel? It would be very good
Lol I was thinking about this today for an idea
Edit: He should do it though, it’s a really cool idea
This is really very cool! Can you make Whip Katars "Chelicerae" from a Shadow fight 3?
The Inverted Spear of Heaven would've been more cooler if that 3rd blade stayed😢
Good work tho
Bro please make
Solo Leveling Daggers also
🙏🙏🙏🙏🙏🙏🙏
Can I get the measurements for all of it? As inches or centimetres please
@@vishalvong6169 I have provided the template in the description, you can use them to get exact measurements,🙂
Can i buy this from you? I would be willing just to buy it cause im kinda lazy tbh
Please make tonfas blade from shadow fight 2 now🙏
Thanks bro🙏🙏🙏🙏💗
People:has no tool to build but have cardboard
Me:I NEED CARDBOARD
@@FurqanSyamil relatable 😂
Bro how many cm is the blade
illl sub to this vid no need to say thanks
@@Blade596 😉👍
i need blade measurements please provide it to me
Im gonna TRY make it without paint tho i dont have patients
Nice work bro 😮
I am glad that you liked it 😊
Hey, I was just trying to build the blade part and wondered what thickness was the mount board I should use?
@@Costco_PancakesX50 mine was of 2 mm I stacked to make it thicker, but you can use thicker directly if you have it 🙂
I just complited it it is so good keep doing crafts
Thanks bro 😊,
im going to make it
id like to do this but i already made one...if it gets broken and i have the materials then i will
i would really like to the toji blade made out of an actual metal material
Bro which company you used paint bro its acrylic or other
Silver one is oil paint rest is acrylic paints
@@DivyanshusCreation ok
Beautiful work bro do you happen to have templates?
Yes bro, please check the discription 🙂
Also how did you paint it so perfectly did you prime it and what paint brand did you use? Would you mind putting it in the description?
I don't use primer, but you can if you want
And for paint I use acrylic paints of any brand and the silver one is oil paint of Asian paints
I have question do you accept to do umbral heirs from sf3 for a cosplay
Actually worked
bro can you create the Morningstar whip from Castlevania?
WE BECOMING THE ANIME KID WITH THIS ONE
Please make brahmastra nag dhanush ❤❤
Noice 😅
Face reveal
I did already 🥲
In Prowler mask 😉
Hi, i cant really get the blade part of with the thiner sides ,every time i try it just ruins it, can you give a bit nor information on how to make the sides look like that?
@@Absolute-.1.-being I think you are telling about Edge?
I sometimes use masking tape to hold and squeeze the Edge of cardboard to make it thin
Thanks a lot, also what is the thickness of the cardboard you used? I think the one I'm using is too thick
@@Absolute-.1.-being the outer layer of cardboard is 2 mm thick and middle one is 5-6 mm,
If you have thick cardboard you can also make it by only 2 layer
Bro make deadpool mask plzz❤️🔥
Amazing work boy🤧🤧🔥🔥
Thank you buddy 🙂, I am glad that you liked it😉
Amazing
My question is it durable enough for battle?
😂
NANI?! WHAT TYPE OF OPPS DO YOU HAVE TO NEED THIS?
Just use tojis othe gun I MEAN ERRM WEPON yah wepon
@@thejasjithesh5524 all of my opps i mean i do know the weapons pros and cons so i can use it to its full potential
Hey bro can you in video show all your craft pleeeeeeereeeeeeeeese
Add the chain of a thousand miles to it
😂👍
Measurements plz?
great work man but i need the size for the blade now that ive done the impugnature, pls tell me or make a vid
Hell naw are you really dumb enough to not use his free template?
Does know that you make hidden Blade from assassin creed
What paper size do you need
😅 I almost made it
Nice
Big fan bhai meet up karlo 🥰
Bro dont forget deadpool mask plzz
😉👍
Hey can u make ronins dadao from shadow fight 2 plzz?
Hey, I'm currently stuck with the beginning, it just bugs me. Hence, I don't understand; when do you have to use white glue and when do you have to use super glue?
@@certifiedbonkerzz I used super glue only on the bottom ring , rest all is White glue
Thanks! This really helps, also I've been kinda struggling to find 5 mm cardboard; I ran out of it on the last craft. Can you tell me where you get yours from, please?
@@certifiedbonkerzz you can get it from boxes of Electronic appliances, box of groceries etc
I have got that from box of refrigerator
You're the absolute best. Seriously, thank you!
Bor can u make another toji's sword named split sole katana 🙌
Ah yes,split sole katana
Bro make playful cloud weapon
I have made a weapon similar to that before 😉 check the 3 section staff in discription
Ok
Can I print the template out of a4 paper?
Cus I only have a4
@@zayarphyo3085 template are for A4 size only 🙂
Weird ask but how do you make your templates? I want to make genji's oni sword but i can't find templates.
I draw my templates myself, you just need a good reference image
And for correct size use image that have hand or arm 😉
@@DivyanshusCreation what I'm asking is how do you make them like a pdf I wanted to like trace the hilt for this sword but it's hard to get the shape right when I draw it by hand so i wanted to take it from the game and trace it and make it a printable template
@@Goobygreen draw on A4 and click a photo
Set canvas of photo shop as A4
Place the photo on the canvas and stretch it so that the Edges and corners of your A4 sheet match the edges and corners of canvas
Export as pdf
@@DivyanshusCreation tysm
I did this with just paper and glue took 5 days though
Nice 👍,
Lol
I like it amazing 👍but please make blood reaper of shadow fight 2
toji was so broke he had to use cardoard
@@Void-yr9be 😂
How much cardboard did you use for this?
@@MrWatso-hn9ck if you count every varity of cardboard, then approx A2 size
I’m a 13yr and I don’t have much experience like this but I use what I can use ^^ I have his sharp part and his middle and now I work on his handle ^^
does hot glue work?
@@Asynx433 it will work but it will make the blade thicker and it will not work while making the edge 🥲
Ay ay ay miren que calidad 🗿
How to make chains ?
@@animexmistakeyou can see it in this video below👇, hope it helps 😊
ua-cam.com/video/gezX90oBf3w/v-deo.html
@@DivyanshusCreation thanks 👍
How many money to you make metal one
BROTHER CAN YOU MAKE OTHER ASTRA OF BRAHMASTRA PLASE?
Toji:just a switch
very cool
I made sepear of hell👽👽👌
Finna turn my friend into Gojo
Bro dont do it
do you sell it?
No😅
New videos kaha hai bhai 4 mahine ho gye
😢😢
@@pratikramanandi2560 sorry for delay bro 😢, I have been busy in my college work,
New video will come on 24
Crack 😎
Bro make ironclads knuckles please
it's good but the dagger is a little too big
Dagger is right, I am small 🥲
@@DivyanshusCreation But it is still extremely successful
How am I gonna do this Do they expect us to be artist or something
HOW DO I INSERT THE TEMPLATE TO CARDBOARD
@@JACK5MILLION-w2f there are few ways to do that
You can use a weak adhesive like glue stick to paste the template on cardboard and cut according to the line and at last peel the template off
Or you can use Carbon paper to trace back the template on cardboard
Or cut out the template then place it on Cardboard firmly then draw the outlines of that cutout on cardboard
Hope that helps ☺️
@@DivyanshusCreation thx bro
I tried to make this and failed miserably i give up
@@LeafyPoipole where , can I help?
нож. Тодзи. 😮😮. ❤❤❤
Link products used pls
im tryna do this in one night 😭
I think if I start early, I can finish around 4:00 pm.
I'm not going to make it too big, because I'm a child, right?
Its cool
Bro can you make ichigo's bankai sword from bleach Name is tensa zangestu
This is probably how toji made the isoh
My question is, what are the measurements?
R the two sticks in the blade chopsticks??
No, those are barbeque sticks 😉