Outsunny Awning 840-150MX Manual Retractable Assembly & Installation

Поділитися
Вставка
  • Опубліковано 22 тра 2021
  • Outsunny Awning 840-150MX Manual Retractable Assembly & Installation
    SORRY GUYS I LOST THE VOICE DURING EDITING THIS VIDEO.
    Please leave a comment if you have any questions.
    Don't forget you sweet SUBSCRIBE 😘💗
  • Ігри

КОМЕНТАРІ • 64

  • @dansmith4529
    @dansmith4529 9 місяців тому +7

    At 10:40 into the video, note that they installed the valence bar UPSIDE DOWN and BACKWARDS. If you follow this video and how they did this, it will drive you nuts. Also note that they must have figured it out by the end of the video because they have reversed it and it is then installed correctly.
    Don't wait until the end to find out!

    • @colemanwatts3588
      @colemanwatts3588 11 днів тому +1

      I was confused by that too. The instructions are terrible and don't have a good picture, but I can confirm that this video installs the front bar backwards. Don't do it like the video.

    • @PlentyofVideo
      @PlentyofVideo  11 днів тому

      @colemanwatts3588 you are right

    • @PlentyofVideo
      @PlentyofVideo  11 днів тому

      That's right

  • @deem3767
    @deem3767 8 місяців тому +1

    Thank you so much for sharing your video with good camera views too. It'll help me install my Outsunny awning soon. ❤

    • @PlentyofVideo
      @PlentyofVideo  8 місяців тому

      You're welcome. Thanks for watching.

  • @mel59725
    @mel59725 Рік тому +1

    Thank you! Very helpful.

  • @khosi1
    @khosi1 Рік тому +2

    Good job 👏

  • @shachrist977
    @shachrist977 2 роки тому +1

    REALLY NEED SOUND, this would have been perfect, but helped a lot!!

    • @PlentyofVideo
      @PlentyofVideo  2 роки тому

      Sorry about that. I will add a music on it. Thanks for your suggestion 😊

  • @reneerocke3205
    @reneerocke3205 3 роки тому +9

    We had trouble following this video because they didn't show each step on film. They would make changes off camera and not explain. The end of the video show's correctly how the awning should look once completed, but that's not how they showed it during assembly.

    • @cinemachinery
      @cinemachinery 2 роки тому +2

      they installed the front bar at the front end of the awning upside down, but must have corrected it later. The front of the fabric should have gone in the narrow slot of the front bar, not the slot on the flat end that shares the "arm bar link" (T-shaped metal piece that slides in to the channel)

    • @DrAnderson1
      @DrAnderson1 Рік тому

      @@cinemachinery - I’m literally fixing this problem right now because I, too, installed it upside down, and when it came time to stand back & admire my success before actually hanging it, I realized that if I hung it the way it was, the awning would open down toward the ground, not out, over the patio 😂 It seems like they must have corrected it offscreen because it took me like 4 hours to realize what the problem was on my end, and that it no longer looked as though the awning in the video had the same problem.
      I will say though, I could NEVER have figured this out without this video…even with the couple of small omissions. The written instructions included are essentially useless, and opening the box was entirely overwhelming. “Some assembly required” has never looked so terrifying! 😂

  • @AGuvnor
    @AGuvnor Рік тому

    Thanks.
    Typical Indian style installation, complete disregard for the coating on the metal.

    • @PlentyofVideo
      @PlentyofVideo  Рік тому

      Awning installation depends on different factors

  • @kwinmad
    @kwinmad 3 роки тому +3

    Thanks for posting this video it's been a great help in putting the awning together. I live in Spain so it came with instructions in pidgin Spanish and it's not very clear. One thing that I can't find anywhere in the "instructions" is the measurement between the wall brackets. Does it have to be exact or is there any margin for error?

    • @PlentyofVideo
      @PlentyofVideo  3 роки тому +2

      Brackets has to be between end of the each main bar side and the were arms attached to the main bar. So 6 inch each in from the each end side. I don't if I could explain it clearly

    • @kwinmad
      @kwinmad 3 роки тому +2

      @@PlentyofVideo Thank you for replying. We are just about to install it now. 🙄

    • @PlentyofVideo
      @PlentyofVideo  3 роки тому

      Np. Please update us with you installation

  • @stephen8289
    @stephen8289 2 роки тому +1

    Perfect tutorial Very nice installation!
    Can you tell me the size of that awning please !

  • @sircamills
    @sircamills 2 роки тому +1

    Does anyone know the distance part G (the T-shaped piece) he uses at 10:29? those parts broke on me twice and i can't find more details on this. Thanks!

  • @eryksplayhouse3242
    @eryksplayhouse3242 2 роки тому +1

    I am curious as to what hight you installed it at and what was the hight at eh end of the retraction.

  • @melanie_at
    @melanie_at 2 роки тому +3

    Hi there... there are plastic posts - approx. 2inches long that get attached in the same slot as the tbars on the mainframe.. I think. E1 and E2 parts.. they stick downward and are supposed to be set 7.9 inches IN from where the outside edge of the hinge on the retractable frame Is.. you don’t show assembly of this, what it looks like when completed, or how they work after it’s together.. I think we’re having a problem with ours... is it possible to add a pic or video somehow of how they work.. absolutely NO legible instructions on the so called instruction sueet/ 🤦‍♀️🤷‍♀️😢

    • @xmodnaRx
      @xmodnaRx Рік тому

      I'm having the same problem

  • @kaderaydin7350
    @kaderaydin7350 6 днів тому

    Merhabalar tavana monte oluyormu bu modelden?

  • @mathstudies281
    @mathstudies281 2 роки тому +1

    Main bangal ke Asansol se hun hame lagwana h 11feetx7 feet ka toh kaise milega aur kya ret padega please jaldi bataiye

  • @mommabear9113
    @mommabear9113 3 роки тому +5

    I don't hear anything. Is there any sound?

    • @PlentyofVideo
      @PlentyofVideo  3 роки тому +1

      Sorry I made a mistake while I was editing the video.

    • @PlentyofVideo
      @PlentyofVideo  3 роки тому +2

      No body supposed to talk on this video. They just show how to install it

    • @mommabear9113
      @mommabear9113 3 роки тому +1

      Thank you for responding. :)

  • @jkelly1686
    @jkelly1686 Рік тому

    What is th weight of this overall?

  • @turbosupra2jzdragracingtob249
    @turbosupra2jzdragracingtob249 3 роки тому +2

    Is there sound?

  • @nancyingram966
    @nancyingram966 3 роки тому +1

    Valance could have been lined up a little better..... the fabric stripes. Otherwise, nice job!

  • @FAJADEVIL
    @FAJADEVIL 3 роки тому +1

    Hello all !! What to say about video ? It is ONLY ONE for this brand video how to DIY but no voice guidance. We can see why, but nevermind. The guys did not USED A PART # E-1 ??? Why ? Only awning is nice and cheap price due to "SOUTH ASIAN" manufacturer. For that reason perhaps YOU DON'T GET INSTRACTION BUCKLET IN ENGLISH !!!!! French and Italian and especially GO FIGURE theirs mesaurments, where to install on both ends the "streach arms" ?!?! Also be aware that this awning could be installed only on the wall, they don't have a parts/brackets for ceilling option. Go figure and yet the video is for deaf-mute audience. Thanks

    • @PlentyofVideo
      @PlentyofVideo  3 роки тому +1

      Sorry bro. I made a mistake and lost the audio while editing.

    • @FAJADEVIL
      @FAJADEVIL 3 роки тому +1

      @@PlentyofVideo , Tnx seems you are quite skilled guy and actually You could get more sub’s but with voice. Honestly I saw few videos and already have one tip handy which I will show to my hubby. 😁.... just please add voice to explain audience how and why. Tnx

    • @PlentyofVideo
      @PlentyofVideo  3 роки тому

      Ok. I will. thank you 😊

    • @athomecomputerrepair9336
      @athomecomputerrepair9336 3 роки тому

      What is part "e-1" and where does it go? The instructions that came with this awning are terrible. This video is good but I wish it had sound. Please help with any info you have.

  • @novay7126
    @novay7126 3 роки тому +1

    What is this name

  • @novay7126
    @novay7126 3 роки тому +1

    Where can we buy

    • @barb_f5749
      @barb_f5749 3 роки тому +2

      @Nova I just got one Outsunny 13x8 and installed it for under $200 from Walmart

    • @PlentyofVideo
      @PlentyofVideo  3 роки тому

      Did you buy it just for 200$😃

    • @barb_f5749
      @barb_f5749 3 роки тому +1

      @@PlentyofVideo it was $186.26 plus tax free shipping, dark brown.

    • @PlentyofVideo
      @PlentyofVideo  3 роки тому

      Wow great price

    • @barb_f5749
      @barb_f5749 3 роки тому +1

      @@PlentyofVideo thank you, I look up today and the price was $196.00 I think it's depends on the day you looking 😉

  • @novay7126
    @novay7126 3 роки тому +2

    How much

    • @PlentyofVideo
      @PlentyofVideo  3 роки тому

      400$ CA+ tax from Wayfair.com
      Where do you live?

  • @terrynewton6267
    @terrynewton6267 2 роки тому +1

    Don't hear any sound

    • @PlentyofVideo
      @PlentyofVideo  2 роки тому

      Sorry about it. I lost the sound during editing

  • @feguti28
    @feguti28 Рік тому

    Audio

    • @PlentyofVideo
      @PlentyofVideo  Рік тому

      It is how to install Awning without audio 🫢😊

  • @MJGruskin
    @MJGruskin Рік тому +1

    Don’t waste your time - no sound - why make an assembly/install video and not say anything? Absurd and ridiculous! 👎🏻

    • @PlentyofVideo
      @PlentyofVideo  Рік тому

      It is how to install an Awning without sound

  • @rubenrendon711
    @rubenrendon711 2 місяці тому

    Extremly unclear video, appricatided because there zero videos out there but very bad explaniton

  • @mytesttickles9355
    @mytesttickles9355 Рік тому

    This is a terrible instructional video with zero sound

    • @Hand_me_a_handle
      @Hand_me_a_handle 3 місяці тому +1

      Considering that it wasn't created by the factory, it helps a lot as the guy did what he could. If you don't like it to the point that you have to leave your terrible comment, then you should make your own video tutorial.