1962 C10 Stepside Full Modern Interior Upgrade! - Supercharged LS Chevy C10 Ep. 6
Вставка
- Опубліковано 8 лис 2022
- Check out our website and pick up some merch to help support the content we bring to you every week!
www.salvagetosavage.com
-----------------------------------------------------------------------------------------------------------
The supercharged C10 Stepside build is getting a brand new interior this week! But first, we kick off the work on the LS C10 by throwing a nice patina paint job on the bed box for our Airlift performance compressors and air management kit. We also chop into our fenders, to get the proper clearance to turn the wheels since the truck is now slammed all the way on the ground. Once we get some work on the exterior done, we make our way into the interior by mounting up our steering column, and while we're hanging out under the dash, we're getting our Restomod AC hooked up. That Restomod won't work as efficiently if the cab isn't insulated, so we're throwing down the Restomod membrane, and tossing our new carpet over it before we start bolting in our brand new TMI bench seat. Not only does this new bench seat look good, it feels great too as you sit on it, looking out over the new Dakota digital dash!
Next week we're installing our 3 liter Whipple supercharger and getting this bagged C10 stepside one step closer to tearing up the streets. So make sure to subscribe so you don't miss out!
-------------------------------------------------------------------------------------------------
Want to See More S2S Madness???
Stepside C10 Cab Fitment
• Slammed LS Swap C10 St...
LS Swapped 350z First Shakedown
• LS Swapped 350z Shaked...
Breaking the Tesla Swapped C10
• We Broke the Tesla Swa...
Turbo Chevelle + GTR Doorhandles
• GTR Door Handles on th...
Tesla C10's first burnouts!
• Burnouts in the Tesla ... - Авто та транспорт
It's amazing to see how much you have grown in the quality of the videos through the last year! Congrats to all the team! Can't wait to see this truck running!
Thanks Omar, like most everything the more you do it the better you get
Hay guys .....
Thank god it's not another Sema drop like every one else, just love the way your vehicles evolve to the finish, and the pickup is looking rad as allways with the rest of the builds....roll on next week....
Stay safe.
Thanks David. man were guilty of unfinished SEMA builds, it was a long 8 months last year getting our 2 builds there. shoot were still working on the Ev tuck lol
Once again, you matched the interior perfectly with the patina! 👍
Thank you so much 😀
GREAT VIDEO AND A GREAT BUILD. THANK YOU TO EVERYONE INVOLVED IN THIS C10 PROJECT. SHE IS A VERY BEAUTIFUL RIDE!!!! THANKS FOR SHARING.
Thanks for watching!!
Man that interior is looking good, and that truck will be roaring in no time. I love how clean it looks.
It's going to look so much better once it's on the road!
This build is looking REALLY good!! Best restomod I've seen on a C10.
Wow, thanks! that really means a lot to us!
Nice job ! Maybe you have bead rolled a cross in the middle of all the panels of the box to avoid vibrations
I posted a reply to your reply in your last video about how to make the dual tesla motor setup work better. Just FYI.
Thanks!
I'm sitting here in Denmark following every video you drop. I always look forward to wednesday after work. Great work and I love all the fabrication.
Wow! Thank you! We can thank you enough for your support!
Trucks looking amazing. Wish I had the $ for yall to do some magic on our old 77 ranchero
Beautiful interior. So clean. You guys do fantastic work.
Thanks so much!
S2S drops make my day. Digging this build.
Thanks so much!
This is a beautiful ride!! Love this build!! I’m so jealous!!
Thank you so much!!
Awesome! Thanks for sharing, I'm doing PBFab level 3 on my 66, and have all the same things to do under the hood yet, VERY helpful!!!! Thanks Again!
Glad it helped! Tag us in your progress on instagram! We'd love to see what you're working on
the interior looks amazing!! 👌🏽🤩
It came out so nice!
I’m in love with this build!
We're glad you like it!
Awesome to see a 60-63 truck build! I’m currently building a 1961 for my wife
That's awesome!
@@SalvagetoSavage do you happen to know what headers you are running? I’m having a hard time finding things that some what fit 61 c-10
Those dashes are one of the best ever designed. I put one in my S10 a few years ago.
Dakota make some clean looking gauges!
Interior looks awesome!
Thanks!
Not only does the interior looks DOPE AS HELL, but Mikey did a patina paint job to the inside of the 'air box?' It's the little things that separate you pros from guys like me!
Thanks brother, yah we had to do something sweet inside that box! It will have a hatch door on it so when he’s showing off the truck he can open it up and be proud
I love the interior on that pickup it looks sweet.
Glad you think so!
Awesome ride Mike! All of the team are doing great for this build!!
Thanks so much for the support!
Looks good. Cannot wait to see this baby rip down the road
We're getting close to getting her out the doors!
awesome of course!!
What an awesome job on this build! I hope this little storm don't bother ya'll. I got hammered here on the other side of the state. Thanks for sharing such killer content!
Hopefully we don't get hit too bad. Hope you guys are doing alright over there!
Keep up the great work all.
Thanks for your support!
Great teamwork and wonderful job on truck... truck looks amazing 👏
Than you!
The interior looks great, BUT, that add-on for the middle of the carpet looks like an add-on. Not a lot of it is showing, but, it still stands out.
The work ethic at the shop could teach some kids a few things about hard work! looking good.
Appreciate that! We love what we do, the environment and vibe at the shop is great so it’s easy for us
King of cool
Love this build!
Glad to hear it!
I absolutely love your content!!! I’m addicted
Glad you enjoy it!
I got to do a Full Facility tour when we were on the Barrett-Jackson Road Tour. Very interesting. Thanks S2S
tour go what factory?
@@SalvagetoSavage Dakota Digital, sorry thought was understood.
@@SalvagetoSavage Sorry Dakota Digital.
Loving this build 🤙🇺🇸
Thanks so much for the support!
Love the videos and your work.
Thanks so much for the support!
Great video, this truck looks amazing!
Thanks! 👍
If you guys are looking for a project vehicle, I’ve got a 07 LS2 Silverado, single cab, short box, that would love your attention!
Great work in your shop, you should be proud!
You guys turn out some sick rides.
Thanks!
Those seats are Mint!
TMI really has some nice products!
That's a nice truck.
Thank you!!
Damn y’all make it look easy👌👌
Thank you!!
Beautiful
Thank you! Cheers!
Hahaha. Supercharger tease. Looks greeeeeeeeeaaaaaaaaaaaat!
Thanks!!!
Nice Truck
Awesome
thanks!
Just subscribed!! Really like custom truck builds !!
Thanks for the sub! You'll love this channel then!
I had an awful rough time with one of their carpets when I replaced it on my 1990 240SX. The passenger side was like battling a Amoeba. It made me have to alter it slightly to make it fit. Luckily it only caused me to make one small mistake. Still annoying regardless with the money those carpets go for. I feel your pain.
never again will I buy that "kit"
S2S need this ty
We all need a slammed stepside in our lives!
I was like please fold that lip down on the fender, instead of cutting it off, lol
We're fabricating inner fenders for the front. It's not going to stay sheared like that. That's why we weren't concerned about folding it!
I feel yer pain on the carpet. Recently did my 59 Apache Fleetside. Same molded carpet from same company. Came folded up like a piece of origami or bed sheet. Can't understand why they can't roll it & then box it. Gee there's an idea. Let it sit flat for WEEKS (not just the 1-2 day recommendation) in my house. Creases never came out. Jute padding with it was a joke. Looked like I tried hiding a body under it all said & done (not really but didn't lay out like I wanted or expected).
Love your content -👍 from Pakistan
Thanks so much!
Carpet kits have always been the bane of my existence. We stopped using them and just have our upholsterer make us a carpet kit every time now. It's also better if modifications have been done to the floor or hump/firewall.
I couldn’t agree more. Never again.
TMI sells some DOPE ass stuff boizzzzzzzz !
We're always impressed with their stuff!
Y’all Guys builds always seems to amaze me!…black & red radiator cap …what brand radiator module used in this build?
What a great job👍🇫🇷🤓
Thank you!!
very very nice!!!!!!
Thank you very much!
@@SalvagetoSavage great pleasure😊
Really digging your channel! Tons of inspiration to us at home. I just finished all the mechanical on slamming my 63' and trying to figure out the front wheel/ tire combo. Would you mind sharing what size wheel (and backspace) and tire size. I am planning on going with the ambassadors as well. Keep up the great work!
We'll have to dig out our invoices to see what we ordered from Detroit Steel.
wish i could work at a place like yours
Send in a resume!
@@SalvagetoSavage livin in germany 😗
What will this truck sell for? I never thought I’d like a step side but you guys did a really good job.
Hey
Hi!!
Great video man! It’s good to see someone working on a 62 for once! Lol. I’m building a 62 also, with full port built frame. I like seeing hope other do things. Where are you guys located?
Thanks for the support! We're located in Boca Raton Florida!
Dope!
👋🔥👍
Thank you!!
Love your work guys...keep it up.
Can i ask where's tim?🤔
He moved on to a different project
Huh, I've had good luck with ACC carpet kits which by the box thats what you had, you never know what was done on a friday afternoon at 4pm
From now on, we're just going custom all the way
I need to catch up on your videos
Dam the angle of the first steering knuckle off the collum looks like its Gonna bind up
Nope! No binding
@@SalvagetoSavage sweet yea from the camera angle it looked like the knuckle angle was really tight
very sweet interior id take a guess either no tunes or just mounting the head unit in the glovebox?
No tunes as for now, have to cut out some items when it’s not my money we’re spending lol
Man that carpet sucked out of the box turned out nice after dude was done with it
The guys at e3 are killer!
Trucks turning out great, but what I really want to know is what’s up with the scanning on that Harley? You have some special body kit you’re building for that?
It's a Honda Shadow. It's Jeff's motorcycle. You'd have to ask him over at @jg_3d
Those are really nice knobs, where can I get some from? 👍🏼 or radiator hose clamps , aftermarket 🙏🏼 , keep up the good work love your channel
The ac control knobs are from Restomod AC!
👌.... primo
Thank you!
Where did u order the door pannel inserts and headliner. Working on a 62 now
What color did you go with with the seats?
Man! I feel the same way about carpet kits... They always leave me down. Usually the same amount you were short. Sometimes on the front top edge, under the dash area. My kits don't say extra anything though, so it's hard to blame the Manf.. Hey, I'm going back to see if your guy added the Supercharger cooler in that front cooling group. I didn't hear him say that. I was mainly listening while making a nice weekend breakfast. (cue the bacon sizzling) But, I was curious since you usually mention vendors who you use for weatherstripping? I need a good vendor for my 70 Chevelle.
Shoot us a message on IG and we can see if we can dig out the receipts to see who we used for the weather sealing!
@@SalvagetoSavage Will do! Another GREAT build. You guys build some awesome rides
Which steering wheel did you use?
"Don't know what you are talking about mate, we've never had a problem," Carpet company
That trans cooler needs to have the lines on the top
Really? How come, I’ve ran it like this before without any issues. But thanks for the heads up. I’ll look into that
@@SalvagetoSavage yeah it won't utilize the top of the cooler at all. There will be an air pocket that cannot come out. Could also cavitate the pump also, due to said air pocket.
Appreciate that Dave, we’ll readdress that.
Love the build but doesn’t the wheelbase seem off to you?
Rear wheels are WAY to far back in the opening of the rear fenders.
What length Column you go with
The fender is above the horizontal mid point of the tire. Couldn't the tire still hit if you go over a bump on full lock? Especially when you add body roll.
this truck isn't a truck that will be racing on a track. Its more of a local, show truck that will drop jaws! when we rip on it it will be from light to light or on the highway.
Shouldn’t the door handles be facing forward?
Hey. What brand and length of the steering column?
Did you put any sound deadener on the inside of the doors?
Not yet. We still have to put our windows in. We're waiting on the glass
Ok, I'm lost guess I'm used to my 6-71. A 3.0 supercharger puts out 183 cubic inches per rev, why would you put a bottle neck on a motor that draws in 376 cubic inches per rev? what am I missing ?
Wouldnt putting some rubber under the air lift system help reduce sound vibrations?
we have isolators under the compressors and under the flanges of the box where it mounts. but if you've ever been in a truck with duel compressors it rattles you soul
@@SalvagetoSavage haven't had the opportunity to be in a truck as cool as this one! Just my rusty dodge haha
I'm looking for a front suspension for my 62. Which one are you running?
We're using the builders series from air lift. They're a pretty good option if you don't plan on doing any major fab work to bag the truck.
what fuse box/wiring harness did you use? for the main harness
That is from painless
@@SalvagetoSavage Thank you just ordered it!
Can someone pls get my man’s some new gloves 😂
Lol, I thought the same thing. Maybe we can get a glove sponsorship 🤟🏼🤪
How could you not show the center “console” of that beautiful bench seat?
We'll do another overview of everything when we're back in it to drive! But we've shown similar consoles, like in the lifted K10 and the F100.
✌🤙👍
Where did the dude with the glasses and the backwards hat dissapeared?
He moved on to a different project
Is this a costumer car or is it one for the collection?
Lol, this is for a customer. It will be hard to see it go through
Need WHIPPLE!!!!! = Don’t like being teased 😉 / OK - A little…..
Next episode! But boy it looks insane
What happened to Tim?
he probably left
Yes Tim left a while ago. Building trucks wasn’t his thing. I believe he went to work for a company that is building some EV car.
He launched a DeLorean resto mod company it seems like
What is the name of the rims? Look so nice.
Those are Detroit steel, ambassadors
@@SalvagetoSavage awesome!
hey guys what steering wheel is that
Got it from CJ Pony parts
Can I get a link to the rims?
UA-cam has been weird about us adding links for some reason. But these are Detroit Steel Ambassador rims!
Why not salvage to savage interior?
Because we don't do any upholstery in house
Those ACC carpets are trash. I had the exact same problem. Too narrow from front. I contacted ACC and they told me that's my mistake, not theirs 😂😂
That's why we had the guys at E3 work their magic! We didn't feel like dealing with the wait time to try and rectify the fact that the stepside carpet kit does not in fact fit a stepside! lol
Same. They used to be better.
And Burnout lol
Dose anyone what type of wheel are on that truck?
Detroit steel. The ambassador