Did this modification, but had to change a few due to quality issues with them very similar to what you have. Falling apart and loosing leds or just stopped working. I noted that sellers wont tell you the codes such as T5 or T10 and alike, Sneaky blighters. Because you would simply work out the type and get better ones for about the same money. There is defiantly better quality out there with multiple fittings if required, I got the largest I could get to fit in the rear. But no matter what, I find something in your videos that is helpful...... as usual. Thanks for all your work on the Pajero since you started and I always have an open ear for you for what you can add to the table.
Hey Jamie! Yeah that's definitely unfortunate. I had mine for a while now with no issues touch wood but if the quality sucks for customers I won't stock them and seek better options. Thanks for the support mate I appreciate you taking time to watch 🙂💯
Those factory globes in the door get hot! Burned my finger and thumb trying to pull it out. ProTip, do them first or before leaving the door open too long. Or else disconnect the battery first.. I cracked it and just left the non-LED's in there. I'll have another go eventually,
Regarding the door lights, as someone else mentioned, remove them as soon as you open the door so they are not hot. They do come out easily enough with a bit of a wiggle, carefull not to pinch the bulb too hard. I found it easier to remove them without gloves as that made them slippery and i had more grip with bare fingers.
Hey mate, I installed these today and saw the full effect of it tonight. These are awesome!! My only problem, when I was fitting my rear cargo light, the whole assembly came out. I noticed it had come off the brackets, these weren’t secured to anything. How do I put this all back together again, as the light is hanging down. Sorry if this is really bad terminology, I’m new to the Pajero scene
Hey, Matey, thanks for reaching out 💯 Whoopsie mate, i am not sure how. There should be some sort of way for it to "click" in and sit there haha. Think there might be clips on the back end of it. Just be careful not to break anything
7:06 those 2 small extra bulbs are T5 size. I think those are for the glove box and the keyhole. 😀 (Those type of bulbs are really too tight. I shaved off some from the side using a cutter so it can fit in the glove box bulb socket.)
Hi also need to remve the decorations piece up the glove box then 4 screws and 2 in dawn the box ..in our middle east models they sale it with the brackets around 3 us dollars 😅
This kit is brilliant, do you know when it will be back in stock and available to purchase thru your website link ? Love to get this done before the nights start to draw in 🙏🏻
@robbiecryer will be a total replacement instead of a globe...something like this : www.ebay.com.au/itm/204193649099?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=pvqydht8tnq&sssrc=2349624&ssuid=LiR_ynvWTaO&var=&widget_ver=artemis&media=COPY
I have the courtesy lights...the ones that shine down on door and road, cobba. My understanding is that you control the mirror all the way facing in, with the switch. Then you get your fingers around mirror and it pops off, allowing access. I found a few videos on u tube....eventually.🤨
Hey Boet. If you can go here and see what the photo looks like and compare it with your car's lights then we can match them up and see if they will fit your car as well 🙂 budget4x4life.com
I did this with mine a couple of months ago and I could not be happier
SOOO GOOD😍😄
Thank you for the interior LED light kit. The delivery was prompt, and I am really happy with the interior lighting now. Good price too.
Glad you like it cheers 😊
You are going to get me in trouble 😂 just placed the order, I fitted the traction control switch today awesome product 👍
Packing it right now! 💯Don't tell the misso😮🤣
@@budget4x4life arrived yesterday looking at fitting them over the weekend 👍
@@groot01280 awesome 💯😃
Have you considered selling a warmer colour temperature option? I'm not too keen on bright white.
Did this upgrade today, super bright, great tutorial 👍
Legend mate thanks again 🙂💯
Did this modification, but had to change a few due to quality issues with them very similar to what you have. Falling apart and loosing leds or just stopped working. I noted that sellers wont tell you the codes such as T5 or T10 and alike, Sneaky blighters. Because you would simply work out the type and get better ones for about the same money. There is defiantly better quality out there with multiple fittings if required, I got the largest I could get to fit in the rear. But no matter what, I find something in your videos that is helpful...... as usual. Thanks for all your work on the Pajero since you started and I always have an open ear for you for what you can add to the table.
Hey Jamie!
Yeah that's definitely unfortunate. I had mine for a while now with no issues touch wood but if the quality sucks for customers I won't stock them and seek better options. Thanks for the support mate I appreciate you taking time to watch 🙂💯
Awesome video mate, very informative, cheers
Thanks Ben, glad you liked it!😊💯🔥
Hey have you ever tried to change the puddle lights on the bottom of the side mirrors?
Unfortunately not as mine didnt come with it
How do you pull out the bulbs under doors. Are they twist or just pull.
Pretty sure just pull. It is in the video somewhere 🙂🙂
Those factory globes in the door get hot!
Burned my finger and thumb trying to pull it out.
ProTip, do them first or before leaving the door open too long. Or else disconnect the battery first..
I cracked it and just left the non-LED's in there. I'll have another go eventually,
Couldn’t pull these globes out in the doors either ?
Regarding the door lights, as someone else mentioned, remove them as soon as you open the door so they are not hot. They do come out easily enough with a bit of a wiggle, carefull not to pinch the bulb too hard. I found it easier to remove them without gloves as that made them slippery and i had more grip with bare fingers.
Hey mate, I installed these today and saw the full effect of it tonight. These are awesome!!
My only problem, when I was fitting my rear cargo light, the whole assembly came out. I noticed it had come off the brackets, these weren’t secured to anything. How do I put this all back together again, as the light is hanging down.
Sorry if this is really bad terminology, I’m new to the Pajero scene
Hey, Matey, thanks for reaching out 💯
Whoopsie mate, i am not sure how. There should be some sort of way for it to "click" in and sit there haha. Think there might be clips on the back end of it. Just be careful not to break anything
@@budget4x4life All good mate, I found an old post on a Pajero forum. Sounds like it’s a common problem.
@@budget4x4life I don’t know how to add a screenshot in comments
Mitsubishi uses T5 size bulb (based on Pajero Sport) for the glove box. I was able to access it by removing the glove box then unscrewed the cover.
Cheers mate will see if I can find it😄
7:06 those 2 small extra bulbs are T5 size. I think those are for the glove box and the keyhole. 😀 (Those type of bulbs are really too tight. I shaved off some from the side using a cutter so it can fit in the glove box bulb socket.)
Hi also need to remve the decorations piece up the glove box then 4 screws and 2 in dawn the box ..in our middle east models they sale it with the brackets around 3 us dollars 😅
@@NoobleDotCom cheers😄💯
@@بوحربيالحوسني Thank you🙂
This kit is brilliant, do you know when it will be back in stock and available to purchase thru your website link ?
Love to get this done before the nights start to draw in 🙏🏻
Whoopsie it is available 💯🙂
@@budget4x4life ordered it 💡👍🏻
@JohnInSale legend thank you 🙂💯
Hey does this kit have ones for the puddle lamps on side mirrors?
Unfortunately not sure what type of light they use so can’t say 😬
Don't suppose you have the curtosy lights in mirrors
Would like to know how to change them as i got 1 blown
And as always
Thanks for sharing cobba 👍
Thanks Robbie 😊💯
Are you talking about the side mirrors? The indicator lights? Cheers
Sorry mate. Yes I am
@robbiecryer will be a total replacement instead of a globe...something like this :
www.ebay.com.au/itm/204193649099?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=pvqydht8tnq&sssrc=2349624&ssuid=LiR_ynvWTaO&var=&widget_ver=artemis&media=COPY
@@budget4x4life ouch
I have the courtesy lights...the ones that shine down on door and road, cobba. My understanding is that you control the mirror all the way facing in, with the switch. Then you get your fingers around mirror and it pops off, allowing access. I found a few videos on u tube....eventually.🤨
Nice hoodie! Hope next product will be shirts and hoodies LOL
Working on it I promise😊💯
Where can I buy? I have the Gen 3 SWB. From South Africa
Hey Boet. If you can go here and see what the photo looks like and compare it with your car's lights then we can match them up and see if they will fit your car as well 🙂
budget4x4life.com
@@budget4x4life they say mine is the T10 - I mailed you a photo
Hi can you please show how to upgrade led bulb in wing mirror Thanks
@@MrCarbroker hey we have towing mirrors so can’t unfortunately
Where are your seat covers from?:)
SCA💯
My approach lamp doesn't work any idea where I can start checking?
would these work for the pajero sport as well ?
There are led kits for pajero sport as well. Just specify the yr model when you look it up.
im referring to the one he sells thats in the description will that one also work
Hey matey. Not 100% sure. Please take your lens covers off and see what the globes look like. If they have the same form and ends it should fit 😊💯
@@popastunnz2342 If they don't look the same message me and I can send you the Pajero Sport kit 💯
@Popastun NZ oh, i see. My apologies 😅
Jislaaik n Afrikaner in Australia
Janee😄💯
It is hard to see from the video which bulb go where. I hope it will be obvious when I start making the changes. Thanks for the Afrikaans lesson!
Yep simple enough 😀 Baie dankie