How To Remove / Install Front Bumper On A 2008-2014 Dodge Challenger
Вставка
- Опубліковано 11 лис 2020
- This video demonstrates how to remove and install the front bumper of a 2008-2014 Dodge Challenger. Tools needed are: 10mm socket, ratchet & extension, 10mm wrench and a pry tool or flat-head screwdriver.
Here is a link to 2011-20014 front bumper (not painted):
amzn.to/49sV0uU
Here is a link to 2008-2010 front bumper (not painted):
amzn.to/497BJzB
As the Bumper push pins break easily, here is a link to Amazon to order replacements for under $10!
amzn.to/3Ag1gpH
Hope this video helps! Please leave a "like" and subscribe to our channel for more videos!
Website: www.martinsusedcarshickory.com
Facebook: / martinsusedcarsllc
DISCLAIMER: WE MAKE NO WARRANTIES, RESPONSIBILITY OR LIABILITY, EXPRESS, IMPLIED OR OTHERWISE, REGARDING THE ACCURACY, COMPLETENESS OR PERFORMANCE OF THIS VIDEO. ALL VIEWS EXPRESSED IN THIS VIDEO ARE OUR OWN AND DOES NOT GUARANTEE RESULTS. ANY ACTION YOU MAKE FROM THE INFORMATION IN THIS VIDEO IS STRICTLY AT YOUR OWN RISK. - Авто та транспорт
It's funny I was just out of body shop where they told me how terribly impossible it is to take this front bumper off justifying the hours and hours of labor to simply have it repainted I'm glad I saw this thank you
I hit a raccoon last week, and I'm thinking about changing my front bumper, as well.
And the chin spoiler. Thank you so much for this!
Thank you for such a clear and detailed video. My girlfriend - with almost no mechanic skills - was also confident about doing it on her own.
Awesome explanation!
This video is so simple and easy to understand. I have a 2008 Dodge Challenger SRT8 and it went exactly how you said and honestly, it turned out to be a very simple task (changing the headlights). Thank you so much!!!
Well done! So many videos like these don’t take the time you did to show all the steps.
Thank you so much for this. I was just quoted an insane price to remove my bumper and fix the clips on a trim piece. I will be able to fix the broken clips and a chipped/cracked Headlight, thanks to your video. ❤ 🚗 ====== 💨
thank you so much for the video. I have an exact year challenger and was afraid to mess it up. Thank you for step by step instructions.
Thank you so much, someone hit my front bumper and I needed to replace the whole front so glad it ain't that difficult I guess😅
Thank you so much now is gonna be much easier to remove the bumper!
Very useful and helpful! I'm realizing that the little patch job I want to do is going to be a bit hindered by lacking space and the wash plate underneath, so definitely not a Me in the Garage situation but I'm certain to reference your video in the future when I can get some space and a little help!
This was a big help!! Thank you sir
Hey! I love how this cut to the chase and made it seem easy. Now it is my turn to actually try it. Haha. 😎
Hey thanks for showing the video removing the bumper I appreciate it.
Amazing video. Thank you. Plan on removing mine to install grille lights
A huge help! Thank you!
Thank you for this video........I have been thinking about pulling mine off.......now I see its not that big of a deal.....thanks again @Hammersrt
Awesome man thank you for the video.
Love your videos. I have a 2007 dodge charger srt8. Can you show a video on installing a front bumper cover? I am having a hard time reinstalling it. Thank you
U nake it look so
Eaxy bro
Just coasting the california highway! 😌✌🏾 Thks
Very good video🤙🏻
Thank you so much for sharing. Today I had a slight accident and need to remove the front bumper. This video will be very helpful.
Thermal expansion/contraction of plastic is way higher than steel, it also deforms by time. The other issue is the paint. You can not use the same paint on that part of the car! I wonder what the designers were thinking!
Great video!
Man I wish I had watched this video first, I did a whole bunch of unnecessary shit! Thank you
Hi what are those plastic pieces that you took off first when just starting
What bolt/screw does the bottom flat part that faces the road part connect to the bumper with? I cannot remember
Do all 2012 SXT Challengers have the same bumper removal process? Ive seen other videos where they had to remove screws from underneath the car in order to remove the bumper...but i noticed Martin didn't do that.
.
Damn, I would’ve cleaned and detailed the inside before. I would’ve put it back together but that’s just me. Well at least I know how to remove the front bumper. Thanks.
Invaluable
Hey Martin,, in behind the bumper cover is there a steel reinforced bumper bar ,I really couldn't see it in the video.......The reason I ask is I have a 2020 Challenger SXT that has no fog lamps, but has the factory pre cut outs for fog lamps . I plan on installing a set of aftermarket fog lamps but I will need a place to install the fog lamp brackets in behind the cover to hold the fog lamp assembly in place........Great video , 😊 thanks.
There is a steel bar behind the bumper. It usually has a removable molded hard foam cover.
That bolt inside the wheel well you make look so easy. I have no room to twist w my box wrench!
I had to loosen it with a wrench (not a ratchet) and then used my hand to unscrew it. The fender is sharp and cut the back of my hand. It’s the hardest part of the bumper removal.
@@MartinsUsedCarsCollectiblesLLC can you remove the fender without removing the bumper ?
@@SPCE_BOYY I would remove the bumper and then the fender.
@@MartinsUsedCarsCollectiblesLLC thank you
Gracia por el video
Is the 2015 bumper any different?
So I see you didn’t opt to put the close-out panels back on, I assume got smattered with whatever damage that happened there. That’s what I’m facing is do I even worry about em, what do they do, where exactly did they even go. Can’t find anything online
Good lookin
Doing my widebody scat now; don’t know that the sides will pop off that easy. I have front splitter plus the fender flares 😬😳
Do you know what type of rivets/clips you got? And where did you find them at??
They are bumper push pins. Here is a link to order them on Amazon $6!
amzn.to/3Ag1gpH
Any idea where to buy a new front bumpers for a 2010 dodge challenger?
Amazon has various front bumper covers.
All the plastic body parts on my challenger are pretty loose even the grill and trim just kinds wiggles..pretty upset about it im assuming its normal becsuse even the newer ones just seem like the bumpers and grills just arent mounted/held on very solid
My 2012 sxt does the same, the grill and the headlight trim are shakey asF
The 2 plastic pieces 1 under the lever, What's the name of those? Need to order some. Thanks
You mean the ones that are protecting cars underneath?
@@Russian_polite_man found them thanks
I need the part number for the nut right at the 3.00 min mark. Goes on the rod behind splash guard . I know it's 10mm but I need the actual thread size or part number tia
Did you ever find it? Been a pain in the ass to find it on mine
Where can I find all the hardware and plastic for a 2012 challenger front bumper?
I'm in the same situation, I want to put an SRT bumper on it and I don't know if they are the same measurements
Does anyone know a website where you can order a new one to put on
Here is a link to 2011-20014 front bumper (not painted):
amzn.to/49sV0uU
Here is a link to 2008-2010 front bumper (not painted):
amzn.to/497BJzB
This video makes it look so easy lol im about to take my front bumper off my 2010 challenger rt got to install the front. Bumber lip and a splitter..
How did it go? Mines needing the same. Its a 2013 RT
@@javierescobar5689 bro its real easy to be honest no need to take lights off ect..
@@customsneakersaddiction6670 thank you, brother! Gonna get to work on it this coming weekend
Good luck! My.bumber and grill all the plastic/fiber pieces on my body seem loose and wiggle..bums me out so bad idk if it needs new clips or what or maybe challengers sre just like that??
Any tips for that inner screw? Can’t seem to even find room to turn my wrench in there
You may have to use an extension (or 2) on your ratchet. I did one turn on the nut and then it was loose enough to get off with my hand.
@@MartinsUsedCarsCollectiblesLLC I’ve tried the extension but the 10 mil doesn’t seem to grip it. I’ve got it lose enough where it turns but either way I turn it, it starts to tighten with my fingers
@@MartinsUsedCarsCollectiblesLLC literally got every thing else off except those 2. Took me 30 minutes for everything else and these are taking me several hours of trying
Its crazy how cars nowadays aren’t made out of much. Plastic.
Bumper cover
All that plastic looks nice but you have really No front end protection really Dodge what happened to the good old metal bumper 😳🙊🙈🙉😭🕳️🔥🤕🤕🤕🤕
One question I have the challenger RT classic mopar 5.7v8 and I want to put the frunt bumper Srt on it.
Whats the question😂