hi peter im a roofer in brighton always been a bit aprehensive about doing step flashings but after watching this master class a few times did a small one on an extension and got some good comments on it, nice to see simple instructions.clear and concise. a true tradesman from the old school of teaching. cheers mate alan brighton
It is rather beautiful to look at the smooth movements of a master craftsman at work--sort of like a bit of ballet in a way. Though I know nothing about Lead flashing, the rythm and easy sureness and economy of motion, along with the crispness of the result are quite pleasing to the eye. From this Yank: Bravo, sir.
Great to see a master at work - having trawled the web there is so much obviously dodgy advice it's good to see how it should be done. I don't plan to DIY but at least I know what to ask for and expect from my roofer!
As a Plumber i feel the same about Roofers! Apprenticeship time served in Sheet Weathering and i've never met a Roofer that has served an apprenticeship. Find this helpful type of video puts the diyer off as they realize just what a skill is involved!
Hi Helidan I understand your concerns, as a trained roofer i am sure, like me you have been called out to put right work that others have failed to do correctly. Its not the kind of work i enjoy. I have now retired from lead work having had a good living from the trade and decided to create film to explain and show methods i have used. Hoping that some roofers who have not had formal training can identify with them and gain from the demos.
time served plumber , made and fitted hundreds of apronns on new and existing chimneys ,all aprom should be let in to brickwork and pluged , outher wise that will slip , regardless of those ties ,
hi juslead1. My chiney stack has pebble dash rendering onit, do i ill need to do the step flashing or can i just g across? BTW love your videos good job!
using reclaimed or re-used slates is a bit pikey ,but method is good but make clips smaller and gives it strenth,the bigger the clip it bends easier,double it up and round off corners look better
@finkenweg14 Hi. Thanks for your comments. Although ongoing. time has been the enemy and still hinders the publication. Once completed i will post it existance on You Tube. Good Luck
James Birkin hi pal, it is up to you what you want to do with it, If the leading edge running into the brick is likely to receive some moment a strong but flexible silicon would suit better. The leading edge is wedged first with pieces of lead to hold it in place then it can be either pointed in or glued with silicon, hope this helps
Lol 2 ties to hold that comon! Code 4 lead aswell. That will be slipped down in the matter of months lol. What happens when heavy winds get a hold of it? Should be fixed either side of the chimney aswell as ties. And possibly fixings into the stone under the flashing that’s already in.
People calling this guy a 'Master' ?? If that was so he'd of not bought a pre-made apron but beat it himself and still had the same outcome.. This is child's play with that part done. The beating and shaping is literally the only hard part about it. Oh and a master wouldn't of done such a shit job at pointing that chimney or left a roof without felt 👍
using reclaimed or re-used slates is a bit pikey ,but method is good but make clips smaller and gives it strenth,the bigger the clip it bends easier,double it up and round off corners look better.
hi peter im a roofer in brighton always been a bit aprehensive about doing step flashings but after watching this master class a few times did a small one on an extension and got some good comments on it, nice to see simple instructions.clear and concise. a true tradesman from the old school of teaching. cheers mate alan brighton
Mr Scholey this is such amazing work and presentation. Excellent job. Keep up the good work.
You are a great craftsman and I can tell you take pride in your work. Cheers mate.
Well said.
Omg ..you’re a real pro !! I wish you lived in Devon ..I’d employ you to sort my chimney out . 👍👍👍
It is rather beautiful to look at the smooth movements of a master craftsman at work--sort of like a bit of ballet in a way. Though I know nothing about Lead flashing, the rythm and easy sureness and economy of motion, along with the crispness of the result are quite pleasing to the eye. From this Yank: Bravo, sir.
Great to see a master at work - having trawled the web there is so much obviously dodgy advice it's good to see how it should be done. I don't plan to DIY but at least I know what to ask for and expect from my roofer!
As a Plumber i feel the same about Roofers! Apprenticeship time served in Sheet Weathering and i've never met a Roofer that has served an apprenticeship. Find this helpful type of video puts the diyer off as they realize just what a skill is involved!
It's a beautiful work and definitely will last a lifetime. New comers should learn from MASTER.
I wasn't so lucky with my roofer.
Thank you for your comments. Comments that are positive act as motivational fuel for the next video/demonstration. Good Luck
Great skills and very well explained
Hi Helidan
I understand your concerns, as a trained roofer i am sure, like me you have been called out to put right work that others have failed to do correctly. Its not the kind of work i enjoy. I have now retired from lead work having had a good living from the trade and decided to create film to explain and show methods i have used. Hoping that some roofers who have not had formal training can identify with them and gain from the demos.
I think your work is great keep up the good work and hole
It down
Nice job 👍🏽
i been roofing for 30 years ,, nice job buddy !!
Clear and concise thanks.
Hi. Thanks for your comment. You will have noticed the front apron is weathered by a chimney dpc so i had no reason to turn into a join.
Thank you so much
time served plumber , made and fitted hundreds of apronns on new and existing chimneys ,all aprom should be let in to brickwork and pluged , outher wise that will slip , regardless of those ties ,
pure class !!
Nice work! i have got to do a chimney with a corble course halfway up the run, any suggestions?
Good work
Yeah someone finally using lead instead of Reynolds wrap
Please make a video of how u made the tray
Not wanting to be a downer but I had to make my own, it's called lead dressing when in the 80,s was paid £16.
And that's steps,apron and gutter....😏
Sounds about right. I know the feeling. However scrap was a big part of the wage.
Yea flashing art!!!!!!!!!!
How do you make the chimney apron, or is it something you buy?
hi juslead1. My chiney stack has pebble dash rendering onit, do i ill need to do the step flashing or can i just g across?
BTW love your videos good job!
using reclaimed or re-used slates is a bit pikey ,but method is good but make clips smaller and gives it strenth,the bigger the clip it bends easier,double it up and round off corners look better
Got to save a shilling when you can Peaky
@finkenweg14
Hi. Thanks for your comments. Although ongoing. time has been the enemy and still hinders the publication. Once completed i will post it existance on You Tube. Good Luck
God stuff, but why doesn't the roof have some felt under the slates?
It's a mock up of a chimney on the ground for ease of filming. The felt is ommited for clarity I'd imagine.
Hi nice work. You know the top part of the lead flashing what goes in to brick work is that cemented in or some kind of silicone
James Birkin hi pal, it is up to you what you want to do with it, If the leading edge running into the brick is likely to receive some moment a strong but flexible silicon would suit better. The leading edge is wedged first with pieces of lead to hold it in place then it can be either pointed in or glued with silicon, hope this helps
According to the slate bible there are slate roofs that are 800 years old, Lloyd , roofer 35 years.
Lol 2 ties to hold that comon! Code 4 lead aswell. That will be slipped down in the matter of months lol. What happens when heavy winds get a hold of it? Should be fixed either side of the chimney aswell as ties. And possibly fixings into the stone under the flashing that’s already in.
Your missing some slate under that stack.
This is scary to watch, clipping the lead in place instead of a mechanical fixing using copper nails.
Might want to use patination oil? It’s a must!
That is not, nor has ever been a front apron, just smack a bit of lead around a corner with a mallet, that’ll do until the cheque clears 🤬🤬🤬🤬
People calling this guy a 'Master' ?? If that was so he'd of not bought a pre-made apron but beat it himself and still had the same outcome.. This is child's play with that part done. The beating and shaping is literally the only hard part about it. Oh and a master wouldn't of done such a shit job at pointing that chimney or left a roof without felt 👍
Why you want to show them how to do it for? Keep the competition stupid dude. Don't teach the dojo!
using reclaimed or re-used slates is a bit pikey ,but method is good but make clips smaller and gives it strenth,the bigger the clip it bends easier,double it up and round off corners look better.