*Came in today and my friend and I both rode **Latest.Bike** Scooter around for about an hour. Was lots of fun and didn't drain the battery much at all!*
I realize this is an old post so I'm sure you figured it out. Since it's friction drive, you don't need to use th pull start to start it. Just sit on it and shove off. The motor will start once you start rolling.
Yeah, there is no way that Bladez can go 55mph. You need to have a seriously modified Goped Gsr46r to even go 50. That Bladez looks like it has a decent exhaust, but I’m saying to get a Goped to get to 50, you need to gear it pretty high, you need to have a Chung Yang gp460 with a Jetpro exhaust and some porting. I have a GSR40 TSi with a Zenoah G43L-D that has a ESP lightly ported cylinder with an expansion chamber at 9/76 gearing. My GSR40 goes 40 down a good hill.
Yeah I was just about to say roughly the same thing when I saw your response, and I'm not trying to outright call him a liar because there could always be something I'm missing.. but I'd have to see a gps speedo reading filmed on an actual run before I could believe he can pull 55 on that. I'm sure it probably "feels" like he could hit that because of the 10" tires along with the fact that he's standing up, but I have a decked out XL Comp BladeZ (his is the Moby S frame) with a ported 49cc.. walboro high low carb with velocity stack.. power pipe.. heavy duty clutch & spring.. with ceramic bearings all throughout.. and at 195 lbs I can top it out around 35 - 36 mph (if I'm lucky) on a straightaway so if he really is hitting 55mph I'd love to know how he's doing it! Anyway they are fun as hell though and I've been tempted to step up to the big league and go the gsr route, but for that kind of money I might as well just get a motorcycle and be done with it lol
@@mahrenballs Lmao yeah, it comes down to money and availability of parts, but I would like to spend a lot of money on a super nice, fast Goped or Evo scooter someday.
@@rabbitfootedkitty1339 Yeah I definitely would too especially after seeing legit videos of guys with scoots that really can pull almost 60 mph burning down the highway on them because that would be fun as hell, and I just remembered I think I might have a video of mine on my channel (I'm pretty sure it's the only video on my channel too lol) if you feel like checkin it out. I basically built mine from the frame up over time and I like messin with them, but I wouldn't mind just dropping the cash on one that's already decked out and crazy fast if I could
@@rabbitfootedkitty1339 Oh and I've always wanted to try out one of those Evo's with the 2 speed gearboxes on them because it sounds like it would help with the low end torque issue that most BladeZ type scoots have, but I don't think I've ever seen any that have been decked out or know if it's even possible to mount something like a beefed out gsr to it. It seems like that would be the way to go though if it's doable because with 2 speeds you'd not only get the highway speeds but you'd also be able to do burnouts and wheelies from hell with it lol
I have the same one. It flys. What’s the name of it I want the exhaust. And it’s not a goped it has a huskvarna style motor on it. It’s a trimmer Motor. The gearing with the multiple belts is what makes it so fast. Never seen another one lol Ike it. I NNED THAT EXHAUST!! How do I find it??
good idea not to run that stand on scooter at full speed on residential streets. The police probably don't like you going 55 in a 25 limit area.....lol As my wife would say..........Men and their toys!!!!!!!!
Did they actually make that without a clutch of some kind or is the clutch spring broke? It seems like there must be a way to move the engine away from the wheel until you are ready to go at the least. maybe you can add a cable to do that so you can stop at stop signs without stalling the engine. I would add a kill switch to the second one rather than pull of the spark plug wire.
No it’s friction drive the rear end is off a Ford sport a spindle is directly on the wheel and to start it your supposed to kick it to bump start it the way that ones set up it’s tricky to start
*Came in today and my friend and I both rode **Latest.Bike** Scooter around for about an hour. Was lots of fun and didn't drain the battery much at all!*
battery you fucking loser
I realize this is an old post so I'm sure you figured it out. Since it's friction drive, you don't need to use th pull start to start it. Just sit on it and shove off. The motor will start once you start rolling.
You can fix the turning wheel when you turn it on by adjusting the idle that should fix it :)
no cause its friction drive
Got my blade z scooter when I was 12. I’m 31 now and it still starts and runs like a champ.
Yeah, there is no way that Bladez can go 55mph. You need to have a seriously modified Goped Gsr46r to even go 50. That Bladez looks like it has a decent exhaust, but I’m saying to get a Goped to get to 50, you need to gear it pretty high, you need to have a Chung Yang gp460 with a Jetpro exhaust and some porting. I have a GSR40 TSi with a Zenoah G43L-D that has a ESP lightly ported cylinder with an expansion chamber at 9/76 gearing. My GSR40 goes 40 down a good hill.
Yeah I was just about to say roughly the same thing when I saw your response, and I'm not trying to outright call him a liar because there could always be something I'm missing.. but I'd have to see a gps speedo reading filmed on an actual run before I could believe he can pull 55 on that.
I'm sure it probably "feels" like he could hit that because of the 10" tires along with the fact that he's standing up, but I have a decked out XL Comp BladeZ (his is the Moby S frame) with a ported 49cc.. walboro high low carb with velocity stack.. power pipe.. heavy duty clutch & spring.. with ceramic bearings all throughout.. and at 195 lbs I can top it out around 35 - 36 mph (if I'm lucky) on a straightaway so if he really is hitting 55mph I'd love to know how he's doing it!
Anyway they are fun as hell though and I've been tempted to step up to the big league and go the gsr route, but for that kind of money I might as well just get a motorcycle and be done with it lol
@@mahrenballs Lmao yeah, it comes down to money and availability of parts, but I would like to spend a lot of money on a super nice, fast Goped or Evo scooter someday.
@@rabbitfootedkitty1339 Yeah I definitely would too especially after seeing legit videos of guys with scoots that really can pull almost 60 mph burning down the highway on them because that would be fun as hell, and I just remembered I think I might have a video of mine on my channel (I'm pretty sure it's the only video on my channel too lol) if you feel like checkin it out. I basically built mine from the frame up over time and I like messin with them, but I wouldn't mind just dropping the cash on one that's already decked out and crazy fast if I could
@@rabbitfootedkitty1339 Oh and I've always wanted to try out one of those Evo's with the 2 speed gearboxes on them because it sounds like it would help with the low end torque issue that most BladeZ type scoots have, but I don't think I've ever seen any that have been decked out or know if it's even possible to mount something like a beefed out gsr to it. It seems like that would be the way to go though if it's doable because with 2 speeds you'd not only get the highway speeds but you'd also be able to do burnouts and wheelies from hell with it lol
I have the same one. It flys. What’s the name of it I want the exhaust. And it’s not a goped it has a huskvarna style motor on it. It’s a trimmer Motor. The gearing with the multiple belts is what makes it so fast. Never seen another one lol Ike it. I NNED THAT EXHAUST!! How do I find it??
I like that stand up scooter, it's pretty cool.
Did anyone see that woman and her child get out of the white van, walked halfway to the house and then VANNISHED INTO THIN AIR. Happens at 7:00 mark
It actually happens more like at 6:55 and it's just because of editing, lol, kind of silly.
@@rabbitfootedkitty1339 lol this dude really thinks they vanished bahahah
You got good eyes.
I have a gas scooter kinda like this, can we put speakers loud enough for the engine on these and if so how?
You can buy a clutch kit for the bike buy one made for a goped sport
Very cool scooters! Looks like fun👍
WHATS A GOOD SITE FOR ;LOOKING THESE UP AND PARTS ,, ANY CHAT BOARDS
WHAT SIZE SHAFT IS THE FRONT WHEEL AND WHERE DO I GET ONE , bOUGHT ONE OF THESE AND MISSING FRONT WHEEL! tHANSK
It’s the idle on the scooter to open or closed fix that and you should be good to go
I want that scooter. I got a big kick out of you riding it.
If you put a zip tie on the spark plug wire, it won’t shock you
What kind of scooter is the blue one?
I think it was called a "Fat Boy"
hmm, that stand up scooter reminds me of something
Hmm no clutch .. can U push start it?
Hmm .. It’s geared really low.
That's a bold claim that scooter might feel like 50mph but realistically your doing 25
No i am not too bright but i am a good mechanic
Either that or a different type of clutch
Is that a Italian active 51cc?
Those like on the bike were actually designed for bump start
Good to know thanks!
it needs a clutch or push and hop on
You're probably supposed to just bump start that first one...
You’re right
You go man! 👍👍👍
LOL!
Turn your idle down sir if its a non adjustment carb then yeppie kiaaaa scooter
i would love to see that go 50
not while I am on it LOL!
Throw a clutch on there from DDM
Thanksman good tip
I would like to buy these from you name a price
sorry friend I sold them a year ago.
Lol I would love to race you on my D4 3.0 electric scooter
If i wasn't 225lbs, I would smoke ya! LOL
@@JeffsLittleEngineService 🤣🤣 I’ll be at 42 mph top speed within 10 secs so ion kno about that 🤣
Nice jack shaft set up sweet scoots 666 OUT
You need to build a double kickstand and when you’re ready to go just push forward and you’re done
that's a great tip!!!!!
@@JeffsLittleEngineService just bump start it push start
How fast are they
I was told this one will do 40+ m.p.h.
Where did you get them garbage? Yard sale ?sweet I wish I could find such deals 666 OUT
Why no clutch?
HOW DO I START MY SCOOTER IF THE PULL STRING BROKE
gotta fix it bro
Put a clutch on it
If you sat on the scooter and pushed off it would have started the motor
Just push start it
Friction drive get on seat start pushing easy peasy ! 666 out
good idea not to run that stand on scooter at full speed on residential streets. The police probably don't like you going 55 in a 25 limit area.....lol As my wife would say..........Men and their toys!!!!!!!!
FTP Karen
Dude why don’t you turn the idle screw down so you don’t have to jump on it like that. Do you not know anything about motors or what?
Did they actually make that without a clutch of some kind or is the clutch spring broke? It seems like there must be a way to move the engine away from the wheel until you are ready to go at the least. maybe you can add a cable to do that so you can stop at stop signs without stalling the engine. I would add a kill switch to the second one rather than pull of the spark plug wire.
No it’s friction drive the rear end is off a Ford sport a spindle is directly on the wheel and to start it your supposed to kick it to bump start it the way that ones set up it’s tricky to start
Hahahaha
Very noisy scooter
Turn your idle down sir if its a non adjustment carb then yeppie kiaaaa scooter
lol!