Replaced the keyless entry sensors in the door handles with some cheap ebay ones. Found the latch difficult to do but found out that you can retain it this way. Easy.
Mate you’re a legend. I was struggling with the missus’s Audi as the front door handle was loose and I knew something had become unlatched. I was getting stressed taking it apart and trying to put it back together again but your video was a great help in getting it working again. Tanny
I changed my actuator today and now Iv followed you video soon as I put the barrel back in the door handle won’t pull It will only pull a small amount Soon as I take barrel out it will work fine
Yeah I watched loads of videos and no one mentioned how to get the latch back on...I sat there with some wire trying to hook it for an hour and then figured this out...I don't normally make videos as you can probably tell but if this saves someone some headache it's been worthwhile.
Thanks so much 🙏, I wasn't changing my door handle I was trying to figure out what the previous owner had removed to prevent the door being unlocked manually (Some pieces missing) and it popped out.
I was trying to find how to disassemble it but I came across this. Although it didn't help for that, when I went back to install it again, this video was an absolute life saver. Thank you so much
I followed all of these instructions but, when I slide the part across that should lock the other part in place, it won't hold there, it just pops back where it was so I can't get the handle to go in where it should be. Any suggestions?
Hi, ive got a 2008 Audi A5 3.0. My passenger side exterior door handke has no tebsion when you oull it to ooen the door. It opens from the inside but not from the outside. Im unsyre if its just a bowden cable or if i have to change all the door handle parts.
Thank you, I’ve just pulled both sides out, the drivers side one has been replaced already so I’ll try just replacing the passenger side one which is original and clearly not in a good shape! All the best Asif 👍
Pour moi impossible de bloqué le loquet avec le support de barillet ou il y a la vis. Méthode ; 1-Décalé le bloc du maintient de barillet complètement à gauche. 2-Prendre une petit ficelle pour tenir le loquet d'ouverture et le tirer vers soit par le haut le plus fort possible, insérer la poignet, relâcher le loquet. Vous verez que la poignet s'ouvre un peu mais pas au maximum. Si c'est le cas c'est que le système est bien monté. 3-Ensuite CENTRER le bloc DE BLOCAGE du barillet (ou il y a la vis dans la portière). 4-Réinsérer le barillet avec votre clé dedans bien en face du système de verrouillage, faire des petits tour gauche droite léger avec la clé. le barillet va s'insérer. 5-Tout de suite revisser la vis de la portière sous le joint à fond. Et la magie la portière s'ouvre parfaitement. En faite le souci de la procédure audi est quelle ne parle jamais de décaler le bloc en metal du barillet qui bloc le passage de la poignet. Bon courage
@@annissa5375 Derien j’ai galèré même avec la vidéo. Il fallait comprendre qu’il est normale que la poignet ne s’ouvre pas correctement avant d’avoir tout révisé ! ;)
Mate you’re a legend. I was struggling with the missus’s Audi as the front door handle was loose and I knew something had become unlatched. I was getting stressed taking it apart and trying to put it back together again but your video was a great help in getting it working again. Tanny
I changed my actuator today and now Iv followed you video soon as I put the barrel back in the door handle won’t pull
It will only pull a small amount
Soon as I take barrel out it will work fine
Hi, After two hours, you helped me yesterday, I will never forget! thanks a lot, I wish you the best.
Thanks
Yeah I watched loads of videos and no one mentioned how to get the latch back on...I sat there with some wire trying to hook it for an hour and then figured this out...I don't normally make videos as you can probably tell but if this saves someone some headache it's been worthwhile.
Oh my this has just saved the embarrassment of me going to the local garage cos I tried to fix it myself! Thanks 👍👍👍
Still helping people in 2023. THis works on C7 A6 as well. Thank you!!
Found this video and This helped me with My TT handle after an hour of frustration!
From all videos, yours make sense. From my 2009 Q5. Thanks and I've shared to my Audi group
This video just helped me out - thanks bud, was driving me mad 👍🏼
Thanks for the help, is used your video as a guide to do it myself today and it worked!
Thanks so much 🙏, I wasn't changing my door handle I was trying to figure out what the previous owner had removed to prevent the door being unlocked manually (Some pieces missing) and it popped out.
I was trying to find how to disassemble it but I came across this. Although it didn't help for that, when I went back to install it again, this video was an absolute life saver. Thank you so much
Appreciate ...for the video. Really fast way to found how to unlock the doors.
I followed all of these instructions but, when I slide the part across that should lock the other part in place, it won't hold there, it just pops back where it was so I can't get the handle to go in where it should be. Any suggestions?
Easy enough taking it off but omg I was stressing getting it back on 😅😅😅😅
Was taking it off to wrap it but ended up just mounting it again after removing, spent 2hours 😅
Cheers great video ive taken mine out today now i kno how to put them back
Hi, ive got a 2008 Audi A5 3.0. My passenger side exterior door handke has no tebsion when you oull it to ooen the door. It opens from the inside but not from the outside. Im unsyre if its just a bowden cable or if i have to change all the door handle parts.
Really helpful thanks
very helpful! Did the eBay ones work ok? And did they need any coding?
Thanks! 😊
They were off AliExpress and yeah they worked fine. Just needed to clear the fault codes and they have been working fine since.
Thank you, I’ve just pulled both sides out, the drivers side one has been replaced already so I’ll try just replacing the passenger side one which is original and clearly not in a good shape!
All the best Asif 👍
Pour moi impossible de bloqué le loquet avec le support de barillet ou il y a la vis. Méthode ; 1-Décalé le bloc du maintient de barillet complètement à gauche. 2-Prendre une petit ficelle pour tenir le loquet d'ouverture et le tirer vers soit par le haut le plus fort possible, insérer la poignet, relâcher le loquet. Vous verez que la poignet s'ouvre un peu mais pas au maximum. Si c'est le cas c'est que le système est bien monté. 3-Ensuite CENTRER le bloc DE BLOCAGE du barillet (ou il y a la vis dans la portière). 4-Réinsérer le barillet avec votre clé dedans bien en face du système de verrouillage, faire des petits tour gauche droite léger avec la clé. le barillet va s'insérer. 5-Tout de suite revisser la vis de la portière sous le joint à fond. Et la magie la portière s'ouvre parfaitement. En faite le souci de la procédure audi est quelle ne parle jamais de décaler le bloc en metal du barillet qui bloc le passage de la poignet. Bon courage
merci beaucoup! c'est la seule instruction qui avait du sens pour moi et ça a marché
@@annissa5375 Derien j’ai galèré même avec la vidéo. Il fallait comprendre qu’il est normale que la poignet ne s’ouvre pas correctement avant d’avoir tout révisé ! ;)