So stoked for you dude. I was one of the guys telling you to change your coils out. apologies on that, I wasn't aware/probably forgot you had a carb issue. So glad to see you get to enjoy all the hard work you've put in. Good too see Ryan back, he seems more cheerful than I remember!
Love that buggy can't wait to see it painted ( with a brush will be fine use a slow drying paint and make sure it has hardener in it, most spray cans and some regular hardware store paints don't, with a good brush and slow drying it will let the paint flatten out) and ATV or taller tires and a seat belt...
Happy for you that is it running without dying just a little more tinkering to get it smoothed out. I would think about puttung some side view mirrors and a rear view mirror for safety reasons. Have a great day!!! God Bless
Hell yea that thing can rip. Love the buggy. Can't wait to watch the trophy truck grow from your imagination. Amazing as always. Ps.... might need a seatbelt
Sounds rich You need to shorten it alittle, move the front end back closer to you and put bigger tires on the front Sick project either way dude love it!
I’m trying to make a dune buggy very similar to this but am struggling to understand how to do front shocks and get wheels aligned right for suspension.
You gotta try and make a snowmobile driven buggy next. I have a ArticCat 440cc 2 stroke engine that makes over 50ft lbs of torque and I'm hoping to build a frame for it this year. That's what you need to turn some big tires.
You 2 should take those 2 carts,and go riding with Red Beard,and Quad Ricers.That would be another great vid.I'm behind on these,so I'm about to watch the big tires go on the 500.
ya sounds like the carbs need to be adjusted try turn a/f screw in all way then 1 full turn out and see how it runs after but sounds and looks good wish i had a buggy like that lol
I just bought a yerf dog spiderbox from my boss today and have a wrecked gs500 in my shop that still runs like a bastard. Can't wait to see how far I get on it this weekend😎
Nice job man...check the gap on your plugs...sometimes you can smooth out higher rpms by slightly reducing it...also look at videos on how to read plugs to determine fuel to air ratios...good luck bud
Since u don't have the proper muffler u need a bigger main jet plus sync the carbs together with a vacuum Gage the carbs should be pulling the same vacuum there should be a vacuum port on each carb to check it to adjust it theirs a screw between the carbs on the butterfly shafts
great build some more strenth in frame could keep frame from twisting when some one crashes into things which will happen always more protection of driver
I would change the oil one more time after the last time and what would happen if you put that 2 gear transmission on that something cool to try have to maybe use bigger material and stuff
awesome build man! keep it up. btw are you looking forward to build custom bikes like cafe racers, scramblers? ıt would be fun to see you build a custom bike.
I know its great but weird to see something of yours being driven by someone else lol because its like u don’t really know how it looks because someone else is driving it. Maybe its just me like when i let my brother drive my car it looks good but weird to see it drive off like “oh so thats how my car looks being driven away” 😂😂😂 idk im weird
Kylee Bates I’m intending on uploading that video on Sunday I accidentally made it public for 30 seconds and it somehow got like 500 views. So yes I will re-upload that video soon
Alright buddy i be looking forward to it was working when it did upload anyways its fast and an mean. Cant wait to see whats up for the cbr 600 lol anyways have a good rest of the week and weekend
Look up how to rev match when down shift. You can find tons of videos online a can learn in an hour. Learning how will extend the life of the tires and engine.
sweet sounding motor.....great job........good to see Ryan back....
So stoked for you dude. I was one of the guys telling you to change your coils out. apologies on that, I wasn't aware/probably forgot you had a carb issue. So glad to see you get to enjoy all the hard work you've put in. Good too see Ryan back, he seems more cheerful than I remember!
You sir...are an inspiration. Have my Lincoln welder in the garage now I’m thinking about what I can sell off to get a pipe bender
there you go all that hard work pays off.
I am impressed on how well the 2 speed kept up
It passed the "Ryan test"! You did a great job, looks like fun. All you need is a little tweaking of the carburetors, and some paint now...
Love that buggy can't wait to see it painted ( with a brush will be fine use a slow drying paint and make sure it has hardener in it, most spray cans and some regular hardware store paints don't, with a good brush and slow drying it will let the paint flatten out) and ATV or taller tires and a seat belt...
Happy for you that is it running without dying just a little more tinkering to get it smoothed out. I would think about puttung some side view mirrors and a rear view mirror for safety reasons. Have a great day!!! God Bless
you need to adjust the second carb because it doesn't sound like it should
this thing looks so bad ass. so glad its running now
Hell yea that thing can rip. Love the buggy. Can't wait to watch the trophy truck grow from your imagination. Amazing as always. Ps.... might need a seatbelt
Sounds rich
You need to shorten it alittle, move the front end back closer to you and put bigger tires on the front
Sick project either way dude love it!
I’m trying to make a dune buggy very similar to this but am struggling to understand how to do front shocks and get wheels aligned right for suspension.
You gotta try and make a snowmobile driven buggy next. I have a ArticCat 440cc 2 stroke engine that makes over 50ft lbs of torque and I'm hoping to build a frame for it this year. That's what you need to turn some big tires.
You 2 should take those 2 carts,and go riding with Red Beard,and Quad Ricers.That would be another great vid.I'm behind on these,so I'm about to watch the big tires go on the 500.
ya sounds like the carbs need to be adjusted try turn a/f screw in all way then 1 full turn out and see how it runs after but sounds and looks good wish i had a buggy like that lol
I just bought a yerf dog spiderbox from my boss today and have a wrecked gs500 in my shop that still runs like a bastard. Can't wait to see how far I get on it this weekend😎
Nice job man...check the gap on your plugs...sometimes you can smooth out higher rpms by slightly reducing it...also look at videos on how to read plugs to determine fuel to air ratios...good luck bud
Are you going to sandblast and paint it at some point, it looks like it is starting to get rusty
When I first started watching your videos u had built a go kart that had skid steering. Would you consider revisiting that?
You should put some flat steel around the front end and make your self a shell. It’s a really cool toy
have u tried to drop throttle needle in carburator its running to rich in gas it will improve throttle response also
Since u don't have the proper muffler u need a bigger main jet plus sync the carbs together with a vacuum Gage the carbs should be pulling the same vacuum there should be a vacuum port on each carb to check it to adjust it theirs a screw between the carbs on the butterfly shafts
Add a quick shift kit so you can stay on the. Throttle an it takes out the clutch past 1st gear
great build some more strenth in frame could keep frame from twisting when some one crashes into things which will happen always more protection of driver
awsome buggy dude u work very well bud way to go
You should look to now getting it road registered as the next challenge as I think tht thing would be an awesome little road ripper!
That is why they put fenders over the tires to keep from throwing rocks behind you and breaking someone's windshield.
I know this is old but did you ever sync the carbs? might help with the high rpm issues
What was the solution to that problem from previous episodes.
Sounds like you could need bigger main jets ?
That moves pretty good 👍
Have been those carbs synchronized please?
I would change the oil one more time after the last time and what would happen if you put that 2 gear transmission on that something cool to try have to maybe use bigger material and stuff
how fast was he going??
That’s pretty cool.
Man that thing looks sick. Great build man. :) - Ford
Ford's Tool Reviews dodge
Dason Stalnaker what?
Dodge is better, bro.
awesome build man! keep it up. btw are you looking forward to build custom bikes like cafe racers, scramblers? ıt would be fun to see you build a custom bike.
Are you going to tidy up the wiring harness
Buddy I think it's finally time to strip down the buggy and paint it... and get that wiring cleaned up and made into a proper loom
The hair on your screen I just fucking whiped my screen before reading your profile name.
I know its great but weird to see something of yours being driven by someone else lol because its like u don’t really know how it looks because someone else is driving it. Maybe its just me like when i let my brother drive my car it looks good but weird to see it drive off like “oh so thats how my car looks being driven away” 😂😂😂 idk im weird
Leek 2x same
Quadricers colab?
Yes that be awesome!!! Come on ratherBeWelding make this happen when quadricers get there snowmobile engine swap done on their go kart.
I second this
Alright I’ll see what I can do
That would be siiiiccckkkk
Man that thing is sweet
Do u have an exhaust on it because if not that’s why it is spitting and sputtering
wow that thing is cool
So again good job sync the carbs and paint
Awesome man keep it up !... but really what clown would hit the dislike?
I wish i had one
sterling very tight looks like
Like your videos
Definitely wouldn't hurt to look into bigger tires
Nice vid keep it up
AWSOME ❤️
What was the total cost
it need Bigger tires ,by the way is awesome
I wish i could build a dune buggy that fast but I dont have the money to get one
Thank you for no profanity I will let my ten-year-old watch this one first one with Ryan and no profanity good job guys
Did you delete the knew up load? I go to your channel an its not there and i go to my notifications click on the upload and it says not available
Kylee Bates I’m intending on uploading that video on Sunday I accidentally made it public for 30 seconds and it somehow got like 500 views. So yes I will re-upload that video soon
Alright buddy i be looking forward to it was working when it did upload anyways its fast and an mean. Cant wait to see whats up for the cbr 600 lol anyways have a good rest of the week and weekend
Check the valve clearances boss
Like to see a 2 speed on the dune buggy.
vuen video
Do a calab with quad ricers
keegan hurren yeah i think that would be great especially when they finish the engine swap
yes!!!!
Bad ass bro
You may not want to film yourself running stop signs.
RX813B yeah, since driving karts on the street is way legal
All that's left is to clean up the rats nest of wiring, put it in that automotive electrical wrap and zip tie it up.
Needs nicer tires than just some turfs on the back
👍👍
Look up how to rev match when down shift. You can find tons of videos online a can learn in an hour. Learning how will extend the life of the tires and engine.
I mean if you want to give it away I’ll take it. Trying to start an off reading Channel but don’t have funds to start it.
Quad ricers mentioned a dune buggy collab! Please make this happen, that would be so sick!
Needs bigger tires
Rather B Welding you should contact quad ricers to make a video together! Glad I wasn't the only one mentioning it in the comments.
Needs some brake lights and turn signals
Did you watch the video? he has both park and brake lights and head lights
Alguém fala minha língua portuguesa
I cant believe that you and your buddy are driving that thing tgat fast without a helmet and especially seat belts. Not to smart buddy
Sync the carbs
Quadricers colab plz it would be sooo lit
colab with quadricers
cercasi iscritti
Hey you might want to find me of Facebook or pm me
Quadricers colab please
Colab with quad ricers
first comment! :P