I see this ass a good minimalist/low-visibility plate carrier ,so,i watched the video until the end and i have a couple of questions/suggestions : 1: Those quick release buckles,seeing how they open from every direction/angle....isn't that also a risk of getting them opened inadvertently if snagged into something? 2: Do you have any kind of padding for the interior side of the plate carrier?(to hide and act as a padding) ...because with those elastics and plastic retention/tension device,it looks very uncomfortable to have rubbing on your skin under the pressure of the plates/radio/ammunition...after long hours of wearing 3: As this seems to be a slick type of plate carrier,low-vis....why don't you use some sort of placard system to attach for different placards (if that makes sense) ..just to improve on the quick modification of this slick plate-carrier ? 4: Have you tested this product under different condition to see where it needs improvement?.....natural environment, mill-sim, running and gunning...multiple users to give you multiple points of view over your product....etc (i mean ,you are in this business so i think you did,I'm jsut asking) It is good to have products competing for the same niche ,it gives us more choice,well done,keep improving your product,it seems a good ideea
Hey, thank you! So regarding your comments, some feedback from Lindnerhof : Regarding your first point - yes the theoretical risk is present. But since the buckles are built in the form of 2 hooks, this is also avoided. It can still happen, as with any buckle system that is also designed as a quick release but is very unlikely. Concerning your second input - The MX244 is designed as a lightweight plate carrier for light loads. If it is used in this way, you do not feel the internal cords already due to the curved plates. For additional comfort, however, you can also use our LT250 pads. Point three - in itself, the MX244 is optimized for a small signature and low weight. Therefore, a velcro surface for placards was dropped. Since we still want to offer our customers the greatest possible modularity, we have a separately available adapter in the range (MX233) that makes this possible. You will fin it in our shop via bit.ly/373ntwY. Concerning your last feedback - all our products and materials are subjected to such tests. Only in this way we can ensure that they meet the requirements of our customers. Especially in the case of plate carriers, which have the task of protecting the wearer, the highest standards must therefore be applied 💪 So thank you once again for your cool input - stay tuned 💥
Habt ihr auch den Selben Plattenträger für Swimmer-Cut Platten und ohne die Fast-Buckles am Schulterriemen? Bzw. kann man die Fast-Buckles ersetzen!? MfG 🤙🏼
Warum nur SAPI L? Könnt ihr bitte erläutern, warum eine SAPI M nicht passen soll? Es gibt kleine Platten für kleine Menschen und große Platten für große Menschen.
Hallo Ricardo, vielen Dank für Euren Input!! Wir nehmen dies gerne auf. Aktuell haben wir uns für die, bei uns gängigste Größe, entschieden. Wir halten Euch gerne auf dem Laufenden 🙌
Hallo, vielen Dank für dein Feedback! Wir nehmen dies gerne auf. Aktuell haben wir uns für die, bei uns gängigste Größe, entschieden. Wir halten dich auf dem Laufenden 👍
Hallo, danke für deine Nachricht- Die Bundeswehr gibt nur Platten passend zur dienstlich gelieferten Schutzweste aus. Hierbei handelt es sich um persönliche Schutzausrüstung, daher können wir dir hier leider auch keine anderen Auskünfte geben. Viele Grüße,
Tolles Format! 👍🏻 Danke für eure neue Präsenz auf UA-cam!
Viel Erfolg, auf das ihr viele Abonnenten mit euren guten Videos bekommt!
Beste Grüße
Alex
Hallo, das freut uns - die nächsten Videos wwarten schon auf den release 👌💥
Interessantes Design. Bei dem Gewicht mussten leider Abstriche in der Funktionalität gemacht werden. Wer die Dinge nicht braucht, eine super Wahl.
I see this ass a good minimalist/low-visibility plate carrier
,so,i watched the video until the end and i have a couple of questions/suggestions :
1: Those quick release buckles,seeing how they open from every direction/angle....isn't that also a risk of getting them opened inadvertently if snagged into something?
2: Do you have any kind of padding for the interior side of the plate carrier?(to hide and act as a padding) ...because with those elastics and plastic retention/tension device,it looks very uncomfortable to have rubbing on your skin under the pressure of the plates/radio/ammunition...after long hours of wearing
3: As this seems to be a slick type of plate carrier,low-vis....why don't you use some sort of placard system to attach for different placards (if that makes sense) ..just to improve on the quick modification of this slick plate-carrier ?
4: Have you tested this product under different condition to see where it needs improvement?.....natural environment, mill-sim, running and gunning...multiple users to give you multiple points of view over your product....etc (i mean ,you are in this business so i think you did,I'm jsut asking)
It is good to have products competing for the same niche ,it gives us more choice,well done,keep improving your product,it seems a good ideea
Hey, thank you!
So regarding your comments, some feedback from Lindnerhof :
Regarding your first point - yes the theoretical risk is present. But since the buckles are built in the form of 2 hooks, this is also avoided. It can still happen, as with any buckle system that is also designed as a quick release but is very unlikely.
Concerning your second input - The MX244 is designed as a lightweight plate carrier for light loads. If it is used in this way, you do not feel the internal cords already due to the curved plates. For additional comfort, however, you can also use our LT250 pads.
Point three - in itself, the MX244 is optimized for a small signature and low weight. Therefore, a velcro surface for placards was dropped. Since we still want to offer our customers the greatest possible modularity, we have a separately available adapter in the range (MX233) that makes this possible. You will fin it in our shop via bit.ly/373ntwY.
Concerning your last feedback - all our products and materials are subjected to such tests. Only in this way we can ensure that they meet the requirements of our customers. Especially in the case of plate carriers, which have the task of protecting the wearer, the highest standards must therefore be applied 💪
So thank you once again for your cool input - stay tuned
💥
Habt ihr auch den Selben Plattenträger für Swimmer-Cut Platten und ohne die Fast-Buckles am Schulterriemen? Bzw. kann man die Fast-Buckles ersetzen!?
MfG 🤙🏼
Der MX244 ist nur für SAPI Standardplatten ausgelegt. Auch die Hakenschnallen sind fest vernäht und somit nicht austauschbar
I like MX244 ultralight plate carrier!
Warum nur SAPI L? Könnt ihr bitte erläutern, warum eine SAPI M nicht passen soll? Es gibt kleine Platten für kleine Menschen und große Platten für große Menschen.
Hätte mir auch gewünscht das es den in M gibt aber naja, muss man wahrscheinlich auf anderes zurück greifen
Hallo Ricardo, vielen Dank für Euren Input!! Wir nehmen dies gerne auf. Aktuell haben wir uns für die, bei uns gängigste Größe, entschieden. Wir halten Euch gerne auf dem Laufenden 🙌
Hallo, vielen Dank für dein Feedback! Wir nehmen dies gerne auf. Aktuell haben wir uns für die, bei uns gängigste Größe, entschieden. Wir halten dich auf dem Laufenden 👍
Bekommt man bei der Bundeswehr Schutzplatten für einen Dritt Anbieter Plattenträger oder muss man sich die selber kaufen?
Hallo, danke für deine Nachricht- Die Bundeswehr gibt nur Platten passend zur dienstlich gelieferten Schutzweste aus. Hierbei handelt es sich um persönliche Schutzausrüstung, daher können wir dir hier leider auch keine anderen Auskünfte geben. Viele Grüße,